Search results

  1. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    Just now when I went into the NVR using the browser it looked different. Here are two screen captures. My NVR is an Amcrest NV4108hs I have never seen the browser or any of these screen captures before. This looks completely different.
  2. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    Here are the two cams showing the motion record settings. The dahue 360 is set to 88 and isn't recording and the barrel cam is set to 60 and is recording. I also selected more area for the Dahua and that didn't help. I keep thinking it must be something simple but in comparing the two cam...
  3. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    Yes every day is selected. And I have sensitivity is set to 88 and threshold is set to 5. Today a squirrel ran around the barrel edge. The nest cam recorded it but the 360 hasn't recorded a thing. Here's a few seconds of the minute the squirrel ran around the edge. Any suggestions on what I can...
  4. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    Yesterday I logged into the NVR and adjusted the settings as advised and saved the sensitivity to 69. I just checked today to see if I had any recordings, and I don't. My owls haven't come in, but I have had birds land on the barrel edge and the cam should have picked it up. I will try raising...
  5. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    Yes, on the tab I hit save and it closes then I hit save on the final tab then refresh.
  6. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

  7. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    I am in the Web UI. in the 360 cam settings. I can't get to the NVR tab
  8. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    I use IE. I do hit save and save after changing sensitivity back to 70 or more. I will try to hit refresh first and see if that works. Thank you all!
  9. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    I don't understand why every time I open the web Ui to see why it isn't recording the sensitivity is on zero. I set it to 70 and hit save on both pages. Why would the Web UI not save my setting? It saves the motion area I have selected. I see squirrels running across the barrel edge and up the...
  10. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    That is not good news :( It is 20 F outside right now. Our house is 44 inside because the heat has gone out. It will be Monday or Tuesday before someone can get here. When it rains, it pours :( . Next week it is suppose to rain and have freezing ice. If the owls haven't started nesting I might...
  11. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    Here's a few things I thought you might want to know. The cam is on a 16' pole around 25' away from the barrel and I haven't had any issues until two days ago when this started out of the blue.
  12. Terri Underhill

    Dahua PTZ-1A225-HNR-XA flashing and won't focus Please help

    This is my Dahua 360 PTZ-1A225-HNR-XA. It is flashing on and off and when it stops flashing it won't focus. And when I change scenes, it makes a roaring sound. Also, it isn't recording. I have tried unplugging it from the cable and plugging it back in and it won't stop flashing. Any suggestions...
  13. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    Until an owl comes in I don't think I can tell much about movement. The snow does seem burned out a bit. I have it at 1/120. It is dead silent outside right now.
  14. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    Okay, I wasn't sure who's directions to follow since three different people suggested settings...so I started with removing the hose and changed my setting to manual and 1/120. Here's a screen capture of my settings. Please let me know if this isn't correct. I am so afraid of messing this up...
  15. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    Okay I just saw all these messages. I'm not receiving emails when someone posts. I will remove the stockings off the overhead light and make the needed changes. Thank you for your patience. If these owls didn't mean so much to me, I wouldn't be so afraid of making a mistake. I really appreciate...
  16. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    I just added a video of Jack coming in this morning and evening. I'm thinking there might be too much blur when my owl moves in low light. These are the settings for this cam in the web UI Please let me know if there is anything you suggest to improve my video. Thanks again for all your help.
  17. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    So these are my final settings. Can I apply these settings to my 360 cam so it will be in color? I will add a screen capture showing my settings before I do anything. And BTW I don't receive an email when someone posts to this thread. I checked my email address and it is correct. I did a screen...
  18. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    3dNR wasn't on. I know I selected it but I must have not hit apply. I think that fixed it. YAY Thank you!
  19. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    This is video from Jan 4th. The video look much better here than now...
  20. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    Even my platform feeder cam looks better than this cam and it's a IP5M-T1179E It's here under bird cam tab- Okie Bird Cam – My WordPress Blog I'm going to see what it's settings look like...
  21. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    Look at this from last year. I don't mess with the settings. The video isn't as good now as it was last April. Let me know what you think...thank you! And look at how much more you can see below the barrel in the video. And I actually raised the barrel about 6" Thanksgiving day so the barrel is...
  22. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    It seems crazy that I have to do anything. Two weeks ago I didn't have issues with noise. The only thing that has changed is the weather. It went from 65 to 6 degrees. All this noise came up when the weather turned cold. I'll see about 1/60... There is really quite a bit of light on the barrel...
  23. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    I got the color back along with a shitty image :(
  24. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    I am saying MODE is grayed out
  25. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    I don't have a COLOR option. Everything under the drop down is grayed out in every setting.
  26. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    Are you saying my videos I add to youtube are from my substream? The screen captures I have added here say main stream on the top left. The image is 1100% better but not in color. I have to be able to tell the male from the female visually. I know the difference by their call.
  27. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    I think I have everything changed but I am no longer in color.
  28. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    I'm in Amcrest Surveillance Pro or PSS. I will open the web UI and change settings there. Ok here's the settings from the web ui, they look the same...
  29. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    sub off screen capture. Should I close out my program and reload it? Or should the setting take effect as soon as I hit save?
  30. Terri Underhill

    I have the Loryta IPC-B54IR-ZE and having noise issues at night

    This was after I changed the sub stream bit rate to 2048
Top Bottom