I’ve noticed this as well, it’s sometimes a little tricky get it there. Wiggle it back and forth and it’ll click right in.
All you need is patience [emoji6]
Skickat från min iPhone med Tapatalk
Can this be done from the NVR or do I have to hook the cameras up to a computer?
Considering the noise coming from the mic, noise reduction is needed [emoji3]
Skickat från min iPhone med Tapatalk
One of my four ZE’s had a strange zoom/focus issue. Wouldnt zoom at all and wasn’t able to focus.
Sent it back to Andy for repair.
Skickat från min iPhone med Tapatalk
No problems doing the upgrade through the nvr. Did it last weekend and it worked fine, although it didn’t solve the issues with my camera so it’s being shipped back to Andy next week [emoji20]
Skickat från min iPhone med Tapatalk
Thanks @BillG
So the “target” setting in the nvr which lets me draw a set square, what’s that for? Makes no sense setting up a target within a defined intrusion area.
Thanks again!
Skickat från min iPhone med Tapatalk
Hi,
The new cameras work like a charm and even though IVS is crazy good, they send me pictures of birds searching for worms so i need to set the target size. Problem is, I’ve searched high and low but cannot find these settings in the nvr?!
Do I need to hook the cameras up to a computer for...
Opened up the camera and managed to find a loose cable and where it was supposed to be connected [emoji6]
Thanks @EMPIRETECANDY and @tibimakai!
Now the ir’s are working like a charm!
Have a nice weekend!
Skickat från min iPhone med Tapatalk
@tibimakai Been going through your posts but haven’t been able to find the pictures of this, could you point me in the right direction? [emoji6]
Also, what’s needed to open up a camera? All my cameras are in the summer house and I need to make sure I bring the proper tools for this as there’s...
Installed them last weekend, just checked them for DOA and focus issues before this.
Will check this when I get to my summer house, hopefully this weekend, or the next.
Skickat från min iPhone med Tapatalk
It’s apparent it doesn’t even turn on the ir’s even though it’s pitch black.
It does change to b/w once dark enough but obviously it doesn’t turn on the ir’s. Once it’s daylight it doesn’t go back to color mode.
It has the very same firmware as the other camera (which works fine) which is...
That was my thought initially as well but came to the conclusion that there aren’t that many settings apart from the day/night/auto settings that affects this, is it?
To be honest I haven’t messed with the settings much, they pretty much are as they were delivered apart for some IVS settings...
Thanks @looney2ns
That’ll have to wait until next weekend when I go up there. Until then I’ll keep track of it with my phone, tomorrow the issue hopefully is gone [emoji3]
@EMPIRETECANDY Have you seen/heard about this issue before?
Skickat från min iPhone med Tapatalk
One issue though, one camera seemed to get stuck in night mode [emoji20]
I had it set to auto and had to manually change it to daylight for it to change to daylight.
Is this a common issue with these cameras? The other one I mounted yesterday changed from night to day like it should.
Thanks...
Decided last minute to go to the summer house over the weekend and brought the cameras to finally have them installed.
Installed two of them today and I’m MIGHTY impressed! It’s pitch black outside but pretty much all of the areas covered are perfectly visible. NOTHING like the cheap Misecu-junk...
Hi,
In a couple of months, I´ll set up my new Dahua system in my summerhouse. During may-august, we´ve pretty much got 24 hrs of daylight but during the rest of the year it´s quite dark. I December-January, i´d say we get around 2-3 hrs of daylight there...
Anyway, bought a couple of...