Search results

  1. J

    Hikvision PoE camera

    Roger! Thanks Beber-k. Great advice.
  2. J

    Hikvision PoE camera

    Many thanks guys, will give them all a go and keep you posted
  3. J

    Hikvision PoE camera

    The cameras are currently working on the 4port nvr. So won't be a loose connection
  4. J

    Hikvision PoE cameras and NVRs

    Hi, thanks. Will give it a go and let you know.
  5. J

    Hikvision PoE cameras and NVRs

    Hi Tone308, Many thanks, I'll give that a try. Correct me if I'm wrong, I'll have to have it in Manual mode?
  6. J

    Hikvision PoE cameras and NVRs

    Hi Gurus, I have a new 8port hikvision nvr, see attached. My existing hikvision cameras from my 4port hikvision NVR won't display on my new 8port NVR
  7. J

    Hikvision PoE camera

    Hi Gurus, I bought a new 8port Hikvision NVR to up grade from my 4port NVR, the problem I'm experiencing is the existing Hikvision cameras don't work on my new NVR ,can some please provide some reasons why. Many thanks
  8. J

    Hikvision DS 7604NI K1/4P

    Hi Folks, I resolved this issue. In "Camera" select a camera, delete the IP address for the camera, select Plug and Play, enter the Password, click OK. Give it some time for the NVR to detect and connect.
  9. J

    Hikvision DS 7604NI K1/4P

    See attached images
  10. J

    Hikvision DS 7604NI K1/4P

    Followed instructions from youtube to change PC IP address, found cameras, clicked on camera but would not connect therefore did not manage to reset a camera
  11. J

    Hikvision DS 7604NI K1/4P

    Hi Alastair, unfortunately the instructions above did not work. Any other solutions. TIA
  12. J

    Hikvision DS 7604NI K1/4P

    Excellent, thanks, will give it a shot after work today
  13. J

    Hikvision DS 7604NI K1/4P

    This becoming quite technical. Set the PC IP address to one in the range that the NVR PoE ports are using, for example 192.168.254.100. How and where do I set the PC IP address? On the PC itself or on the NVR? What is the IE11 browser? Internet Explorer 11? I've have this set as my default already.
  14. J

    Hikvision DS 7604NI K1/4P

    So I've shuffled the cameras from port to port on the rear of the nvr the IP addresses and ID never change, remember these are only PoE cameras not IP camera. The biggest issue I'm have is no camera display and non of the Camera Management options like OSD, Image, Motion work following the...
  15. J

    Hikvision DS 7604NI K1/4P

    Thanks, will give this a go. If this fails, is there another possibility?
  16. J

    Hikvision DS 7604NI K1/4P

    Hi Alistair, many thanks for responding. In the beginning I didn't unplug the cameras, but since all these issues they have been unplugged. I was always under the impression these cameras were simply plug and play PoE cameras, I didn't have to set anything up initially. Anyway I'm going to carry...
  17. J

    Hikvision DS 7604NI K1/4P

    hi guys, looking for assistance with my nvr. Did a reboot the other day cause I couldn’t get the remote network to connect. Following the rebooting lost all display. Neither of the cameras display on my monitor, just shows “no link”. Did a successful update to v3.4.103, this solved nothing...
  18. J

    Hikvision DS 7604NI K1/4P

    Hi Guys, the other day I did a reboot on my net. Following the reboot I’ve lost a visual from PoE cameras. Monitor shows “NoLink”. Then power is available as the IR lights come on, green and yellow LEDs on rear camera ports flashing. I’ve lost parameter settings in Menu- Camera- OSD, motion etc...
Top Bottom