Search results

  1. basti76nie

    Connection Failed for "Alarm Messages" inside iVMS4500 mobile App

    After searching the web and reading some documents I can answer to my own question. The communication to enable the Alarm messages and the remote control will use the http-Port (normally Port 80) Each time i didn't change the Ports on the NVR and use the standard port forwarding on the router...
  2. basti76nie

    Connection Failed for "Alarm Messages" inside iVMS4500 mobile App

    Hello, my last 3 installations of NVRs (DS7604) doesn´t support not any longer the option to enable the "Alarm Messages" inside the iVMS 4500 mobile APP. And it´s also not possible to do the "Remote configuration" with the mobile App. I only receive the information "Connection failed". But i...
  3. basti76nie

    Remote camera on local NVR

    You have to add the remote camera manually to the NVR. Choose HikVision, enter the IP Address of the shop camera and the Port is 554. Also the user and password of the camera.
  4. basti76nie

    Changing the overlay informations with ivms4200

    hi, where can I change the size of the overlay Informations (Name&Date&Time) with the iVMS-4200 Software on the win PC? And for each steam it should be possible to use a different size of the overlay informations but where can I change this? And how can I change the generel name of the ip...
  5. basti76nie

    Attaching Pictures after Motion Detection

    Hello, i want to receive pictures after motion detection. When i activate this option on the NVR i only receive small pictures with low quality. But in this case the arming schedule works fine. If i use the same option directly on the camera i receive nice pictures with a high quality but the...
  6. basti76nie

    Line crossing and Motion detection only by night

    Hello, i´m using two DS-2CD2352-I 5MB EXIR Cameras. They are connected to the internet and i want to receive mails with snapshots if a person is crossing a line or a motion in a specific area is detected but only from 8pm to 9am. I set the NTP-TimeServer for each camera, i also used the...
  7. basti76nie

    Recording on NVR and SD card ?

    Ok i understand. Thank you very much
  8. basti76nie

    Recording on NVR and SD card ?

    Where can I find the settings for recording on a remote HikVision NVR?
  9. basti76nie

    Recording on NVR and SD card ?

    Hello, is it also possible to record the camera images to the NVR and also to a Cloud-Service (e.g. FTP, NAS) For me it's important to record not only locally. Regards Bastian
  10. basti76nie

    Simultaneously record on NVR and cloud service

    Hello, how can i store locally my surveillance Cam's on the HikVision NVR and simultaneously on a cloud based service? Regards Basti
  11. basti76nie

    Need help with cross line detection

    Hello, i don´t unterstand the new functions for the cross line detection. Now i can use a Min and Max area to detect the crossing line detection. First i thougt this will be a good option to reduce false alarm (in my case sending a Mail) but now i didn´t receive Mails anymore. In the older...
  12. basti76nie

    Incorrect channel number on ivms 4500 mobile app

    I don't know if it's necessary for HikVision IPCs but I had the same Problem with 3rd Party and after activating the sub stream (Camera Settings) it works for me
  13. basti76nie

    Incorrect channel number on ivms 4500 mobile app

    Did you use 3rd Party IPCs?
  14. basti76nie

    Hot to use the zero channel on the NRV

    Hi guys, i´m using a NVR DS7600 with the newest firmware. Today i tried the zero channel to see all channels in only one video stream. Now the stream will switch automatically every 5seconds to the next IPC. Is there also a option to see all the IPC´s in only one stream??? Basti
  15. basti76nie

    New functions for line crossing detection (FW R6 5.4.4)

    I will try it. Thank you very much
  16. basti76nie

    Error Code 91 only on iPhone iVMS4500

    maybe i found the issue The 3rd Party camera has no 2nd stream for a fluid video. Only the clear stream is available. So the iPad and the HTC can show the clear stream and the iPhone shows the error code 91
  17. basti76nie

    New functions for line crossing detection (FW R6 5.4.4)

    I want to see who crosses the line to visit my house or leave my house. I uploaded a picture with min and max object - is this correct?
  18. basti76nie

    New functions for line crossing detection (FW R6 5.4.4)

    So I need only the min or max field and not booth?
  19. basti76nie

    New functions for line crossing detection (FW R6 5.4.4)

    Hello, after updating the firmware to R6 5.4.4 i saw additional function for the line crossing detection. Now it´s possible to define a min and max field. Could somone explain me this min / max field? regards basti
  20. basti76nie

    Error Code 91 only on iPhone iVMS4500

    Hello, i use a HilVision NVR DS7600 with 5 x 3rd Party IPC. Up to now i was using the iVMS App on my Android HTC without a issue. It was no problem to watch the 3rd Party IPCs. Now i'm change to a iPhone7 and it's not possible to watch the 3rd Party IPCs. I only receive the error code 91...
  21. basti76nie

    Some of my DDNS NVRs are not reachable

    I use already VPN with DDNS from Hikvision
  22. basti76nie

    Some of my DDNS NVRs are not reachable

    Than I have to use completely other manufacturers!
  23. basti76nie

    Some of my DDNS NVRs are not reachable

    I know the will migrate the DDNS Service but not today and this is not the answer for my question. By the way: Do you believe the DDNS Service will be the only way for Hikvisio to get my/your IP Address??? The have much more options to integrate something in there firmware. Regards Basti
  24. basti76nie

    Some of my DDNS NVRs are not reachable

    Hello, Is there maybe a issue with the DDNS Service today? Some of my NVRs are available and some of them are not. It looks like the DDNS Service does not receive the new WAN IP. Do you also have this problem? Regards Basti
  25. basti76nie

    Blurred Videostream with 5MP

    The settings for both cameras (all Profiles) on the NVR are the same. So I want to check the settings directly on the cam
  26. basti76nie

    Blurred Videostream with 5MP

    Maybe blurred it's not the right word for my problem. I think one of the two cameras shows a different Videostream with a lower quality. Here are two pictures
  27. basti76nie

    Blurred Videostream with 5MP

    They have a fixed lense in this case 4mm
  28. basti76nie

    Blurred Videostream with 5MP

    No i'm not in the same Network. This is a costum installation. I know the way to use the virtual host when I'm on the same LAN as the NVR. So I have to use screensharing to use the virtual host service from the NVR. Tomorrow I will try it.
  29. basti76nie

    Blurred Videostream with 5MP

    Is there a chance to remotly connect to the cameras (not the NVR)? I activated the VirtualHost Function on the NRV. But i did not forwarded any port to the cameras and i have no vpn connection to the router. Than i can check the setting for Video&Audio and can make screenshots.
  30. basti76nie

    Blurred Videostream with 5MP

    The settings in "Video&Audio" on the NVR are the same for both Cams. But only one shows a perfect Videostream Main-Stream Resolution 2560x1920 Bitrate Variable Quality ++++ FramRate 20 Max Bitrate 4096 Codes H264 H264+ Off I will also try to check the camera settings directly on the IPCam...
Top Bottom