Search results

  1. 1

    DMSS android app recorded playback issues.

    i have audio NR off on my cams. if you go to "me" then "setting" on the dmss app, NR is there.
  2. 1

    DMSS android app recorded playback issues.

    so far, when i playback my cams or cams from a friends house in another city over my wifi here, the app works properly. if i use the cellular data and not wifi, playback stutters. it's strange because my data speeds are faster than my home internet speeds. my cellular data speed is 114Mb down...
  3. 1

    DMSS android app recorded playback issues.

    i really wish they just kept updating gDMSS plus. the only thing i found wrong with that app was the playback didn't work. i find the ptz on DMSS is slow to respond and some of the buttons don't respond to your finger press on the screen and you have to hit them a few times. i also really wish...
  4. 1

    DMSS android app recorded playback issues.

    did they release an update? i'm on version 1.96.002 build date 2021.11.25 i does seem to work properly at the moment.
  5. 1

    DMSS android app recorded playback issues.

    anyone having playback (playback of recording) issues with the DMSS android app? (live playback is fine) when i first install the app, the playback works ok for a bit then it gets screwy when i try to use it later on after using it a couple of times. when i click on a camera, click on playback...
  6. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    i changed back to h264.h and am using CBR. should i use h.264 or h.264h ? what bitrate should i use for 15fps 1080p?
  7. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    i have disabled WDR for night. cameras are using smartIR do you recommend against using h.265? i had just switched all my cameras over today. pretty much using highest bitrate shown, VBR level 6. also, what is the next interval up from 8.3ms for the shutter speed? 8.3ms seems a tad bit dark...
  8. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    though i got WDR working by making the settings in internet explorer, WDR doesn't work while in in black and white mode at night when IR is on. this must be by design?
  9. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    gives a slightly darker image. but im guessing movement will be picked up less blurry?
  10. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    wittaj, that is a very informative reply. have changed my main stream settings to: h.265 smart codec off 1080p 15fps vbr quality 6 4096 max bitrate iframe 15 for conditions: wdr is set to 4 for day and night exposure mode is set to auto but maybe i should put it at shutter priority 1/60 for...
  11. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    that worked. i wonder what other settings were not applied because i didn't use IE? p.s, is it normal to have your fps limited to 30 when using WDR?
  12. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    i did a factory reset, updated the firmware, did a factory reset again. the WDR still doesn't work. they must have broke it in a firmware update a while back. doesn't work on any of my cameras, confirmed with version V2.800.0000015.0.R, Build Date: 2020-04-30 or later. i wonder with which...
  13. 1

    Dahua NVR H.265 auto switch setting?

    in NVR settings/cameras, what does the H.265 auto switch setting do?
  14. 1

    IPC-HDW5231R-ZE Firmware Build Date: 2020-04-30 WDR not working!

    anybody notice that IPC-HDW5231R-ZE with firmware V2.800.0000015.0.R, Build Date: 2020-04-30 the WDR setting does nothing anymore? BLC and HLC work but not WDR. i'm having this issue on multiple cameras at different sites, even with IPC-HDW4231EM-ASE cameras. is this a known issue? also...
  15. 1

    IPC-HDW5231R-ZE Rhea V2.800.0000016.0.R.200430 Latest new firmware

    anybody notice that with V2.800.0000015.0.R, Build Date: 2020-04-30, the WDR setting does nothing?
  16. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    ok, i managed to transfer the update.img to the ipcam. i go to 192.168.1.108 and i can see it has dahua firmware now. so it was a success only issue is i can't login to the camera with username: admin and password: admin i even tried password 1234, 888888, 88888888, my old password, etc...
  17. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    host is alive. pc firewall and antivirus is disabled. the camera is not pingable at 192.168.1.108 or visible on the network but that is because i am connected to it via serial i am guessing. camera is also connected by ethernet. am i supposed to be using any specific version of tftp? i am...
  18. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    i get the following error in putty: run up Using ambarella mac device TFTP from server 192.168.1.214; our IP address is 192.168.1.108 Download Filename 'update.img'. Download to address: 0x2000000 Downloading: * TFTP error: (0)>
  19. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    this is the text i got from printenv >printenv bootargs=console=ttyS0,115200 mem=110M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc bootcmd=sf read 0x200100 0x8000 0x8000;sf read 0x2000000 0xf0000 0x180000;bootm 0x2000000 bootdelay=3 baudrate=115200 ipaddr=192.168.1.108...
  20. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    ok. that worked. when i did printenv i got a bunch of text print out on the screen. when i do "run up", it's says "link down". i have the update.img file on my desktop. is update.img supposed to be in a certain location? in the folder that is called "update.img" that is created when i...
  21. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    ok, i soldered the wires on, opened putty and saw the writing update on the screen so i must have connected the wires correctly. now what do i do? i try typing on the open terminal window "printenv" but no text shows on the screen as if im not typing anything.
  22. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    so first i flash with update.img through the wires i will solder to the camera pcb using putty then go to web interface and update with DH_IPC-HX1X2X-Themis_EngSpnFrn_N_V2.600.0005.0.R.20170527.bin ?
  23. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    i want to use this firmware: https://dahuawiki.com/images/Files/Firmware/DH_IPC-HX1X2X-Themis_EngSpnFrn_N_V2.600.0005.0.R.20170527.bin so rename it to update.img ? what do you mean by updating each module?
  24. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    i may be able to solder some wires in there. what is the procedure to upgrade? i want to make sure i understand it before i proceed with the soldering.
  25. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    the 2.54mm pitch connectors i have are too thick for the holes and spaced too far apart. the holes are too close. i couldn't even hold the pins from the jumper wires i have because they were too bulky.
  26. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    im finding it impossible to manipulate those wires. those holes are too tiny and close together. any way to upgrade using a laptop and ethernet cable?
  27. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    i did the factory reset. it reset the ip to 192.168.1.108 but the default password 1234 (or even my password) doesn't work anymore and i can't login to the camera.
  28. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    lol. that's right. it needs to be powered on from the poe.
  29. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    ok. and i assume the ethernet poe should also be disconnected?
  30. 1

    Dahua IPC-HDW1320S rebranded as WatchNet mpix-30irbf-k28, change to dahua firmware?

    i found a pl2303 but the positive voltage line is 5 volts. is this ok?
Top Bottom