Search results
-
Changing the ip on a plug and Dahua PTZ ?
Clear and concise, thanks! So all of my cams are in the 10.xxx scheme except two which are in the 192.xxx scheme. I have 13 cams in all. How would limiting the DHCP server scheme affect my setup? -
Changing the ip on a plug and Dahua PTZ ?
Unfortunately, so am I:oops:! That will be my next step. To assign static ip's to the cams. I've learned a lot from this thread. Thanks -
Changing the ip on a plug and Dahua PTZ ?
Yes they were initially powered by the NVR, and then I moved them into the garage to the BV-Tech Poe/POE+ switch. -
-
Changing the ip on a plug and Dahua PTZ ?
Yes, initially I did plug them in the NVR's built in POE switch then moved them over to the BV-Tech POE switch. -
Changing the ip on a plug and Dahua PTZ ?
192.168.0.1 No the POE switch is unmanaged. -
Changing the ip on a plug and Dahua PTZ ?
Checking further it seems the D6400 Netgear model is doing the routing as the Apple Airport Extreme is set to Bridge Mode which is a passthrough mode. The D6400 DHCP settings are the following : 192.168.0.2-192.168.0.254. Pretty much the whole enchilada I have just 2 cameras in the 192.168.xx... -
Changing the ip on a plug and Dahua PTZ ?
Hello, No, both cameras are on a BV-Tech ten port POE/POE+ switch. Hello, With these two cams, I did not change the default ip at all when I got them. I plugged them in and they booted right up with a 10.xxxx ip. I am assuming the plug and play aspect of these cams was that, by DHCP, they... -
Changing the ip on a plug and Dahua PTZ ?
Hello, This is my setup. Netgear modem to an Apple extreme router. The router is hardwired to another Apple Extreme (garage) which is wired to the BV-Tech POE/POE+ switch. It is a 130 Watt model. The two cameras are wired to this switch. They are in the 10.X.X.X scheme. Thank you, Tubac -
Changing the ip on a plug and Dahua PTZ ?
Hello, Hi, Both Dahua. One is SD49225Xa-HNR and the other SD4922T-HN. These cameras are powered by a BV-Tech 10 port POE/POE+ switch. Thank you, Tubac -
Changing the ip on a plug and Dahua PTZ ?
Thank you for responding to my post. Let me try and answer your questions. I have an Apple Extreme router 4th generation. I don't understand what "outside the scope of the DHCP pool" means. Can you explain? Do you recall where you saw that? It's not correct. I saw it here but could have... -
Changing the ip on a plug and Dahua PTZ ?
Thank you for responding to my post. Let me try and answer your questions. I have an Apple Extreme router 4th generation. I don't understand what "outside the scope of the DHCP pool" means. Can you explain? Do you recall where you saw that? It's not correct. I thought I saw it here but could... -
Changing the ip on a plug and Dahua PTZ ?
https://www.amazon.com/Loryta-SD49225XA-HNR-Starlight-Network-Tracking/dp/B081RJJQT4 This is one the newer plug and play cams. I know I read somewhere that you should not to try to change.the IP address but I ran into a problem. I reset two cams to try to fix a connectivity problem and somehow... -
Where should i start to troubleshoot this problem?
Thanks for the suggestions. The log screenshot is from PSS. All the logs state either “network disconnected”. Or, “user logged in”. I am hoping it might be a connection problem, but with the number of similar issues reported on this camera I am not holding my breath! Hopefully the seller will... -
Where should i start to troubleshoot this problem?
O no Talk about coincidence! I use this cam and others to record Western screech owls in nest boxes. All the nest boxes are camera equipped and I use this cam to record them outside the boxes! I think we may have crossed paths somewhere earlier online. I just got off the phone with the... -
Where should i start to troubleshoot this problem?
O no Sure. From the camera log: This happens 10-20 times a day. Some time it is ok for hours then a series of shorter off and on events. Link to the new firmware given by the seller: General_SD-Prometheus_MultiLang_NP_Stream3_V2.800.001W000.0.R.200506.bin Don't know if you have seen it... -
After factory defaulting SD49225T-Hn cannot change ip address
Thank you! That solved my problem. -
After factory defaulting SD49225T-Hn cannot change ip address
In Dahua ip config app I can’t change the ip address from the default 192.168.1.108. In the config app i filled out the ip edit field: This is the prompt I get: Is there another way to change the ip? Or is there something I missed doing in Ip config? Thanks, Tubac -
Where should i start to troubleshoot this problem?
No it happens in the day too, but at night the periods with outages are longer and more frequent. I am using a Dahua OEM NVR. (I have a Mac and I use Smart PSS.) -
Where should i start to troubleshoot this problem?
Let me try to explain. If the Poe switch is under powered can I use a 30w Poe injector and plug it into the Poe switch? Will that work? In another post, I contacted the Amazon seller and he told me that they don’t recommend using a Poe switch or injector but must use a power supply... News to... -
Where should i start to troubleshoot this problem?
I just looked back on my original order. In the questions section the seller does not recommend Poe but rather a 12v dc or 24v ac power block: Q:Can i just plug into my poe+ switch or need specific 12v adapter? seller response or someone that actually tried poe+ please. Answer this question A... -
Where should i start to troubleshoot this problem?
Ii feel your pain..I will try all the suggestions given here and see if a solve is in the offering. Good luck! -
-
Where should i start to troubleshoot this problem?
It goes out more when the ir is on. I’d say twice as frequent at night. Perhaps it could be a power problem. I have a 30 watt Poe injector. If all else fails can I plug the injector into the same port on the Poe switch? -
Where should i start to troubleshoot this problem?
Thanks I will give this a try! -
Where should i start to troubleshoot this problem?
The Cat 6 cable is 24 gauge solid copper wire. I will unplug the other cameras and see how long the cam stays connected. Thank you! -
Where should i start to troubleshoot this problem?
I will give that a try but it is a moulded plug factory terminated. I did swap cables and had the same result. The cam may stay on for 6 hours or so then unexpectedly drops out. Some times it comes back in minutes and other times I have to unplug then plug it back in to have it come back on... -
Where should i start to troubleshoot this problem?
I am trying to track down a problem with a fairly new camera that goes offline intermittently. First I switched ports on the BV-Tech POE switch-no change. Then I changed the ethernet cable with no success. I added dielectric grease to the poe switch its plugged into which has cut down on the...