Search results
-
R
Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017
I thought that the firmware on post #43 was for a R6 camera to flash 5.45 on a 5.5 firmware camera? My camera does have 5.5 & its causing onvif issues (older firmware versions dont cause this problem with my DVR software). It didnt end up doing anything but the camera still works fine. I... -
R
Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017
Hi, So I gave it a try but am getting this error: Note: The upgrading process will be 1 to 10 minutes, please don't disconnect power to the device during the process. The device reboots automatically after upgrading. Is this due to my firmware already being at 5.5? If so - how would I... -
R
Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017
Again - I just want to confirm that my camera - DS-2CD2342WD-I is a compatible with this update - again no warranties, etc - Just want to confirm it 'should' work. -
R
Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017
Sorry - it is model: DS-2CD2342WD-I Thanks! -
R
Hikvision IPC Firmware 5.5.0 - released 24 Sept 2017
Just want to confirm that the 2CD234WD is a R6 Camera (which it looks like from the firmware) - I am figuring I will give the file he has as a sample the flash since he did all the work on it. -
R
Hikvision Onvif Issue - Firmware 5.5 - DS-2CD2342WD - no Onvif?
Hi, So my older Hik 2CD2342WD has a firmware of 5.3.8 and an onvif version of 2.4 The newer Hik 2CD2342WD has a firmware of 5.5 and an onvif version of 16.12 Its possible that Geovision doesnt support that high of an onvif version? -- EDIT - My DAHUA PTZ has a 16.12 onvif version & works... -
R
Hikvision Onvif Issue - Firmware 5.5 - DS-2CD2342WD - no Onvif?
Hi, I bought a few hikvision cameras to run with my Geovision VMS system (adding a few more actually) - the older cameras logged right into the server with the onvif protocol. I went to the config settings, enabled onvif, then added a user/pass. I then went into Geovision where it the... -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So I bought a second SD52C225U-HNI & I was curious if there is some sort of manual, or video on all the various settings of the camera? I would like to know what it can do. I currently have one rule where if motion is detected within my square, the camera follows in that square for 30 seconds... -
R
Using a Dahua IP PTZ Camera as a Video Camera
RowRegatta - Did you receive the camera yet? Do you like it? -
R
Is Auto Tracking Just A Gimmick
Thank you! That is helpful. For your motion tracking setup - are you using a tripwire or intrusion? Is it mostly accurate? It seems if i set more than one rule, nothing happens. If motion in my "intrusion" area stops, stays still for 30 seconds, then moves again it doesnt track the... -
R
Is Auto Tracking Just A Gimmick
Dasstrum, Which firmware are you using on the camera (I have the same with a 2016 FW). I am finding the Autotracking doesnt work particularly well. Periodically a car will drive in & the camera zooms in on a tire (not helpful). Thanks, Rich -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
BTW - Did Miles have a bunch of posts that were deleted? I see a bunch of quotes with missing comments from Miles. -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Hi, I am running the 12-20-2016 firmware build - not exactly sure the correct latest version. I 'think' what I want to do is have the camera run through my 3 presets bouncing around every 10 seconds. If any of the three presets see motion it should track them. After no motion for 1 minute... -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So i have a Loftek D1 camera (Circa 2012) - I want to replace it & I really like this Starlight unit. Does the recommended camera come with an arm to attach it? Do manufacturers make a PTZ Hanging style camera that has a cover so you cant see where the lens is pointed (similar to this link... -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So I am using a regular 15.4w POE switch & the unit seems to be working fine. Do these have a heater that kicks on when its cold (needing more than 15.4w)? I bought a POE+ injector (shipping from amazon) but I wanted to make sure I need it. -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So to the next person looking to setup the camera as an onvif device... While the default password for the web is admin admin (or admin password) - most people tend to change it. When you change the web password, it does NOT change the default onvif password (admin/admin). So while your web... -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Nayr - do you have any issues running the camera in onvif mode? Do you have two other IP's listed in the onvif device manager like I do? -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So that strange IP is called zero config in the ODM. I am not sure how to get rid of it. -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
No - Thats Dahua's NVR type software? I am sort of stuck $$$ in the geovision 3rd party world due to software investments. Does PSS do some sort of factory reset? -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So in the Onvif device manager, I was comparing the trouble camera with the other cameras (geovision, dahua, ebay brand x, etc). The new one that i am having trouble with shows these IP's: 192.168.1.208, 169.254.10.200, 169.254.10.100 The first IP is the correct IP, the other two are not mine... -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
So I am able to add it as an Onvif camera but it just doesnt transmit any data. The three "general" cameras are Dahua cameras - plus one Geo for good measure. So the web interface works OK but the Onvif is a bust - after the firmware update too. -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Thanks - I am working on it now. I used this file within the zip: DH_SD-Eos_EngSpnFrn_N_Stream3_V2.420.0001.0.R.20161220.bin I hope thats the right one. -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Hi, Mine came today in the mail. I was setting it up with the same settings as my other Dahua PTZ cameras (2mp, 12x ptz). I have 3 & they all work great as Onvif cameras with Geovision VMS software. This one is able to be added but the stream never starts. It has this software on the... -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Just curious - how can you tell the model number within the settings? -
R
Bullet Mic Review
Is there a way to make this work with just a Cat6 cable connected to a POE source? Stand alone audio over POE?- richtj99
- Post #69
- Forum: Accessories
-
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
One other question - what is the 'starlight' function of the camera? Or is it just a brand name? -
R
Whats better than Geovision VMS?
Hi, I have been using Geovision for close to 10 years. I switched over to VMS & the software is OK & I am wondering if there is something else better. My setup is about 20 Geovision cameras & 16 3rd party (Hik, dahua, misc onvif). I am using an I7 PC with 32 gigs of ram. I have it running...- richtj99
- Thread
- Replies: 0
- Forum: NVR's, DVR's & Computers
-
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Alrighty - its working - the channel (CH) i changed to 0 & that makes it work! http://username:[email protected]/cgi-bin/ptz.cgi?action=start&channel=0&code=GotoPreset&arg1=0&arg2=1&arg3=0 Going to have a fun time playing with this! Thanks guys!! -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
Is it possible my camera is older so it doesnt support the http api? my version information is attached. -
R
Dahua Starlight Recessed Dome PTZ (SD52C225U-HNI)
I have the preset set on the camera itself (presets 1 to 5). I did try the URL with a 01 & a 1 just in case it wanted two digits. Both times the page answered OK. Just no changing the camera. This is absolutely awesome (well once we get it working right) - this will make it very fun to play...