Search results

  1. R

    hikvision 5.2.8

    Can't you connect directly from your 24p switch to RJ45 from DS ? Normally must to work, even if it's POE on you NVR. Must to be transparent, no? I don't know this specific model, what was written in user manual? Maybe Google or Youtube regading the connections possibilities with your specific...
  2. R

    hikvision 5.2.8

    Yes, I recommend that. Some switch models 4xPOE or 8xPOE are not so expensive than that. Best choice is to have it manageable if you want to use multicast. But my best recommendation, don't buy UFO switch from China, go to TPLINK/NETGEAR, that's fine.... Or POE injectors, if you have only 2/3...
  3. R

    hikvision 5.2.8

    My cams goes directly to a manageable POE Switch TPLink. Some outside cams goes through Ubiquiti Wifi Lan network, where I have power supply but not LAN cabling. From my house I use also a dedicated wifi link: NanoStation Loco m2 to make a bridge over 1 km for the CCTV of my parents house. So I...
  4. R

    DS-2CD2732F-IS Inside Garage - Not switching between Day/Night fast enough

    Hi, from my experience, The minimum delay is 5 seconds in the settings. This allow in 99% of the cases to be adaptative to the environement : Clouds and Sun, shadows, sudent flashes, etc... The cam doesn't react as a simply switch, but analyze the field before switching to IR, to allow in...
  5. R

    Hikvision different manufacturers

    Looking through my tool "Advanced Ip scanner", Seems there are different manufacturers for Hik or maybe it was the result of their internal FW hacked cooking they made before shipment? same models can be from different manufacturers too, so this is not specific to particular model. - Eka...
  6. R

    hikvision 5.2.8

    I used a third party NVR not Hik solution. So I have less issues about languages as my VMS doesn't take care about: only Onvif compliance and Hik does it correctly as they are Onvif certified. If some one have more info, you are welcome.
  7. R

    hikvision 5.2.8

    Yes, But when you read CCCH in the S/N, these cams are not for USA or European markets as per my understood. So these cams are not supported outside China and of course these original fw are all chineese. What we received are all modifed fw by the sellers and in some cases, not modified at...
  8. R

    hikvision 5.2.8

    Yep, The best specialist is CBX.... Others made it quite well but not 100% English or multilanguage. This is the status today.... A lot of posts, some guidelines but not the full solution plug & play free. Probably will happens soon. From my side as I can record and playback the streams...
  9. R

    hikvision 5.2.8

    I'm not an expert at all as i'm not a programer... But all seems to turn around the "IEfile.tar.gz" under /DAV folder... The firmwares are unified for the same range: 2CDxxx models
  10. R

    hikvision 5.2.8

    Yes, seems to me there is another value not changed correctly somewhere. It was not made 100% multilanguage and can influance the OSD on other VMS, even if on settings we do not activate the OSD. in the camera In my case for example, I do not have the OSD time through my VMS in some of them. I...
  11. R

    hikvision 5.2.8

    Yes I think, they upgrade the original firmware by an kacked one to be multilanguage and allow them the availability to make international sales. Now, they have also their cooking and seems they don't make it the same way, depends of the vendor. And, when it was done like a rabbit, you still...
  12. R

    Best Place to Buy HIK Vision

    I will be interested to get 4mm lens as all my cams are with 2.8mm. Simply because with 2 of them, the angle is too wide. Do you have some recommendations or links to get the right model, not too expensive, even from China. In advance, thanks for your help here.
  13. R

    Hikvison Permanent Region Code Hack

    I think Chineese industry have not the same thoughts as us at all. We are not in the same world. For us we want finished products, well packaged and 100% improved, with warranty and Customer support. Come on, Hik series 2 is not a range for Pro, only for residential... Pro will go more with 4...
  14. R

    Any 3MP Hikvision that accepts external mic?

    Found this one : $88 http://www.aliexpress.com/item/Hikvision-DS-2CD2132-I-3MP-Mini-Dome-Camera-Full-HD-1080P-POE-Power-Network-IP66-Indoor/1871393655.html 2015 New V5.2.5 Hikvision DS-2CD2132F-IS with Alarm+ Audio replace DS-2CD2132-I 3MP Mini Dome Camera 1080P POE IP CCTV Camera
  15. R

    hikvision 5.2.8

    My personnal thinking: Don't mix parts of one firmware with another one who is not with the same level (release/version), this can breek you cam. and TFTP will be necessary after that to recover... But I'm not a specialist... These are my thoughts
  16. R

    Hikvison Permanent Region Code Hack

    Don't worry about that Sure Hik knows that perfectly and allows these open doors for the China vendors . At end benefits, always benefits.
  17. R

    hikvision 5.2.8

    Hi Phillip, You have 3 alternatives here : a) Going back to 5.2.5 and find on topics how to make it English (but not full English as OSD still shows Chineese somewhere) and if it's fails, only solution is to do TFTP to recover FW. Works and request some kwnoledge on how to do it.... b) Go...
  18. R

    hikvision 5.2.8

    I wanted to add some comments and special thanks: - CBX who spend around 1 hour connected to this Chineese cam version and fixed the reboot issue (and for FREE : thanks a lot and works correctly) - networkcameracritic, who shared his work in public for all interested people - All others for...
  19. R

    hikvision 5.2.8

    So going back to v: 5.2.8 multilanguage seems to be delivered from China with a crappy hacked FW who simply doesn't work. The most frustrated is the fact on box factory labelled: 01/2015 and fw v5.2.8_141231 The most incredibe Inside IEfile, most of the files are quite old : 15 July 2014...
  20. R

    hikvision 5.2.8

    To phillip da. I think if you want all languages, we need to contact CBX, the magician man who solves that...
  21. R

    hikvision 5.2.8

    So just received my 2 cams labelled and FW 2.5.8. For me FW it's really crappy ( or I'm totally wrong and I really need some vacations :-) As you can see, the cam reboots automatikely every xxx minutes 'black holes are the missed recordings due to disconnections and reboot times': And of...
  22. R

    Frustrated with new 2432. Help!

    Hi GPSRider, I have same cam since few days and I'm actually testing it with WIFI. I noticed dropframes when I use it in 1080p with full frame rate. I didn't yet took time to investigate my network fine tuning , as it's quite new : just installed Unifi from Ubiquiti, but these are my actual...
  23. R

    Hikvision 2532F-IS - not getting any audio through

    Me too I was confused with these cams at the beginning. Hik made it difficult with somes protection rules according to distribution régions to avoid parallel market introducing regional firmwares related with SN in the cams. Makes sense somewhere as the pricing are totally different between...
  24. R

    hikvision 5.2.8

    Curious about features on it. Doesn't matter if it's English :shame:
  25. R

    Hikvision DS-2CD2032-I Text Overlay (Problem with Overlays 2, 3, and 4)

    You are right hereu : works....
  26. R

    Hikvision DS-2CD2032-I Text Overlay (Problem with Overlays 2, 3, and 4)

    For curiosity (as I don't use Text Overlay function), I tried on my cams v 5.2.5 and I have the same results as pepperfr, only Line 1 displays on screen, the others layers appears also over line 1 on screen: This overlay was created by my VMS without using OSD from Hik cam: Now if I try to...
  27. R

    hikvision 5.2.8

    I'm curious to understand the difference between Hik firmares. Not related to language or geographical distribution zones but more about the internal changes and improvements. If I'm not wrong 5.2.0 to 5.2.3 improved 3 minor things (3 digit as minor release) 5.2.3 to 5.2.5 (only 2 minor things/...
  28. R

    Hikvision 2532F-IS - not getting any audio through

    Roman, Did you read this post? You have a link to a zip file Maybe it can help http://www.ipcamtalk.com/showthread.php?2413-Can-t-reload-hikvision-firmware-with-tftp
  29. R

    Hikvision 2532F-IS - not getting any audio through

    Personnaly I used this model with a third party SW certified Onvif profileS. So it works with Audio correctly since I upgraded the cam to v5.2.5 with region changer (thanks to CBX). In fact the third party management software and PC NVR I have don't take care if the cam is chineese or European...
  30. R

    Hikvision region code changer

    So just upgraded my 2 devices with CBX solution to the last 5.2.5 Multilanguage firmware. Nothing to say, it works and I have my FW now in French. Just to mention : very easy method, no needs to enter in programming, tftp or ssh. Just need to execute the file and upload the new FW. Too easy...
Top Bottom