Search results

  1. J

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Have you tried setting record to 'when triggered' so it records even if DS cancels it and then opening the DS status page while viewing a recorded cancelled alert? The DS status page tells you exactly when, in ms, the frames that were analyzed happened For example in mine the motion leading...
  2. J

    BI/Deepstack haven't alerted on a car pulling into driveway - need help answering "why?"

    Mine went from 440ms using dark back to 168ms with just objects, I am using GPU
  3. J

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    I've also noticed, by using the deepstack status display, that cars nearly overlaping/in front of stationary cars get ignored. I've also, recently had an issue where it will inconsistenly analyze the extra frames, even though I have 'giraffe' in cancel and it should always analyze the extra 10...
  4. J

    BI/Deepstack haven't alerted on a car pulling into driveway - need help answering "why?"

    In the first pic: 'Rule' config' draw a rectangle around the area you want to check if a car enters. The BI DS settings are same as usual
  5. J

    BI/Deepstack haven't alerted on a car pulling into driveway - need help answering "why?"

    as wittaj said, use intrusion detection in the camera instead of BI Motion. For me in testing, I have the same camera 5442T-ZE, that is close to 100% for cars in my situation, at least for triggering. I use that with external triggers and then I have BI use DS to analyze. I have IVS set for...
  6. J

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    I find it odd that BI with DS would only use/require iframes, one a sec, because if you use AiTool fro DS, it uses the jpg snapshots BI makes, and you can set that timer, in the BI record tab, for less than one sec per jpg snapshot. That is a reason I delayed using DS in BI: similar to Dave...
  7. J

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    I always thought it meant: If checked only use DS for BI motion triggers and not something like ONVIF trigger
  8. J

    BI DS analysis timing

    I think I finally figured out my issue, now that we have the new deepstack status page: I have a car sitting in the view and for some reason, sometimes ,it is not marked as stationary by BI. On those occasions BI sees car and flags the alert as car and stops the extra image analysis after the...
    • JL-F1
    • Post #16
    • Forum: AI
  9. J

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Open the Deepstack status window then Playback a clip from after you checked 'save analysis' now look at the deepstack status window and it will show you what was used for the alert confirm for that clip
  10. J

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    errors after clip: If I turn off 'DS test and tune' while in clip and then close clip, no error. Temp fix at best Deepstack status blank: in camera choose trigger-->AI-->check 'save AI analysis details'
  11. J

    DeepStack "Nothing Found"

    My BI setup works fine with the GPU version of DS. I do not get any server error 100
    • JL-F1
    • Post #7
    • Forum: AI
  12. J

    BI DS analysis timing

    I wonder if I don't get the blue borders because I don't have sub-streams? Which also makes continuous+triggered superfluous, but I tried it to see if the border showed before you ask :), I don't use substreams because it only changes my cpu from 11% to 7% which makes no difference on...
    • JL-F1
    • Post #14
    • Forum: AI
  13. J

    Problems with video quality on new HDW5442T-ZE

    Are you sure the web interface isn't showing you the substream? That's what mine defaults to. Also if you set up BI the 'modern' way you may also be seeing the substream
  14. J

    AI/Deep Stack Inquiry

    So much agree. AI with an Andy camera and BI is amazing accurate.
    • JL-F1
    • Post #7
    • Forum: AI
  15. J

    BI DS analysis timing

    I can't see the blue borders at any speed. I recorded for awhile at continuous + triggered and nothing Someone who can: How far into your pre-buffer do the blue frames start? right at end? 2 secs before the end? or do they start a few seconds after the event start after the pre-buffer?
    • JL-F1
    • Post #12
    • Forum: AI
  16. J

    BI DS analysis timing

    I'm not seeing a blue border either. I has assumed the snapshot in the alerts folder was the first frame sent to DS, maybe its the last. It would be nice if the snapshot folder had all of the frames used.
    • JL-F1
    • Post #5
    • Forum: AI
  17. J

    BI DS analysis timing

    Trying to figure out my alert and Deepstack analysis timing So I have a camera that uses IVS intrusion via ONVIF to BI it has a 15 sec 'pre trigger buffer' and a + 10 images per sec setting in AI 7:46:04 beginning of video 7:46:19 alert shows on timeline 7:46:28 is shown on the alert jpg...
    • JL-F1
    • Thread
    • Replies: 16
    • Forum: AI
  18. J

    Who uses Dahua AI capable cameras? Reliable AI for triggering events? Pro's/con's?

    I find when I have it set to humans only the IVS AI is much more accurate than Deepstack alone I am using a 5442 IVS intrusion alert with Blue Iris, using ONVIF alerts, no motion in BI Curious if Blue Iris has any way of showing that it was a human or a car that set off the alert, without...
  19. J

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    change '3d' to 'cuda' in the dropdown menu and you see see it spike when analyzing if GPU deepstack
  20. J

    5.4.7 - May 25, 2021 - Support for DeepStack custom model files

    So, Car , capital c is from the customs model (night) car, lowercase c is from the regular AI model That's what i've noticed on my labels Maybe that means we could have a 'night' profile ai, and have it report things with capitals, and during the day report things with lowercase, haven't tried yet
  21. J

    5.4.6.4 Alerts Not Working

    yes, I get the rect with the % I am only using 'Smart Event' w/ 'Intrusion Detection' on this camera, but no MD in the camera or BI My other camera that didn't work is only using IVS, no MD or Deepstack, and it is all good again as well
  22. J

    5.4.6.4 Alerts Not Working

    5.4.7.3 is working for me with ONVIF
  23. J

    5.4.6.4 Alerts Not Working

    Me as well, no ONVIF on 5.4.7.2, fine with 5.4.6.3. I re-inspected, rebooted, turned onvif off and on...
  24. J

    Update 5.4.6.4 IVS Trigger Issues

    Having the exact same issues as you both and also went through all the same debug steps: Went back to 5.4.5.3 and all is fine Thanks for posting this so I know it is not just me :)
  25. J

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    I have an issue I've seen and proved while watching live: The camera is already triggered from wind, then around 5-10 seconds into the still triggered from motion a car drives by and BI/DS misses it. I assume this is because it analyzed the first 5 secs of images and missed the car at 6 secs...
  26. J

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Pretty much once a day it starts showing and leaving some of the snapshots in the clip menu on the left of BI. I have tried using 'alerts' and 'confirmed alerts' filters with the same result. Any ideas?
  27. J

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203

    Figured it out: it was the clone camera, once I disabled it I started getting the ONVIF triggers. Then I followed wittaj idea and deleted and re-added the clone and all is well. Thank you all for the help Now to wait excitedly for the new firmware :)
  28. J

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203

    I have: EmpireTech IPC-T5442T-ZE System Version V2.800.15OG004.0.R, Build Date: 2020-12-03 WEB Version V3.2.1.948164 ONVIF Version 19.12(V2.7.0.907196 BlueIris: 5.4.3.8 I can't seem to get IVS, intrusion to work. The camera will record the event to the SD, but BlueIris never...
  29. J

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    I'm having trouble running two instances of deep stack in ai-tool deep stack gpu 2021.01 ai tool 2.0.627.7696 when I go in the deepstack tab and add another port: 82,83 click 'start' it seem to be fine, it shows two command line and URL and 'running' but then after the first event is...
    • JL-F1
    • Post #3,222
    • Forum: AI
  30. J

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    I have the cameras and the Server time synced with nettime Everytime I look at Aitools history the time on the first motion event jpg is about 4 seconds behind the aitools history listed time, every jpg after the first are all in the same second. The jpg time is the same second as the file...
    • JL-F1
    • Post #3,119
    • Forum: AI
Top Bottom