Search results

  1. L

    RJ45 splitter work for 2 cameras on 1 cat5e cable?

    I purchased this. works well https://www.amazon.com/dp/B08NW5S7L2?psc=1&ref=ppx_yo2ov_dt_b_product_details i used for POE cams though
  2. L

    Blue Iris screen freeze

    Thank you so much. Senior moment, I never even noticed that before!!
  3. L

    Blue Iris screen freeze

    Hello: I have been running Blue Iris for a few years and for some reason, the main screen displaying the cameras remains static ( e.g. frozen) computer specs Device name DESK Processor Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz 3.60 GHz Installed RAM 16.0 GB (15.9 GB usable) Device ID...
  4. L

    DS-2DE5225W-AE 2MP 25x wall mount

    Thank you. That seems to work so I ordered that model!! I finally spent time adding a dual NIC and vlan and the limiting factor on completing the system was this low-tech mount!!!
  5. L

    DS-2DE5225W-AE 2MP 25x wall mount

    I usally buy all my cameras from Andy but found this DS-2DE5225W-AE 2MP 25x on ebay at a good price (e.g. 250$ new). seems to work well but now i need to mount it and test it against my Dahuas. According to the HIK vision website the model for the mount is DS-1604ZJ / Any suggestions on...
  6. L

    SD499225XA-HNR and Blue Iris PTZ setttings and autotracking

    I moved it a new place and finally set up my blue iris. Thanks for the forum. I added a dual NIC and also VLAN. I have 2 PTZ now ( 2 more to come) 1. SD 49225T-HN ( firmware v2.800.0000000.6.r) and DS 49225XA-HNR (v2.812.0000012.0.r) both were purchased from Andy. 2. The HN series...
  7. L

    Dual NIC setup on your Blue Iris Machine

    Thank you. It works. I found out that I dont need to use the port # with the hikvision. So I will now switch all my cameras to the 2nd NIC. It really was not that hard. I also found out that the orbi pro mini ( with VLAN) works pretty well.
  8. L

    Dual NIC setup on your Blue Iris Machine

    I have the same question. Thanks for the great instructions. SO I added a second NIC card 192.168.55.X in the blue iris computer and added the camera. I can add the camera to blue iris ( it is an annke/HIKvision) though I usually use Dahia. I can ping the camera and get a reply. I can...
  9. L

    DH-SD49225XA-HNR PTZ. lost connectivity

    I tried mutiple POE injectors with multiple cables. It appeared to be damage from a torrential rain and my inadequate waterproofing. I tried to reset a few times but no luck.
  10. L

    recomended POE camera installers in Philadelphia area ??

    Thank you and loony2ns. I will look there but also wanted to give preference to any forum members!!
  11. L

    recomended POE camera installers in Philadelphia area ??

    We are looking at moving to a new house in Phildelphia are. It has stone all the way around. I was intersted in knowing if there are recommend installers in the area? I only neet the cable run and someone creative with mounting the outdoor cameras? Post-mounting and maybe one brried cable...
  12. L

    POE switch troubleshooting

    Thank you. I assigned a static IP address to all the cameras. Otherwise, the router will assign IP addresses to new devices. I rebooted the main POE switch twice and now all of the 5 other cameras are back on line. I removed the tp link injector. I have used this injector before as I like...
  13. L

    POE switch troubleshooting

    thanks 24 Port POE Network Switch W/ 2 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 250 Watts Total Budget I only have 5 cams. but I rebooted again and one cam only and that works. I will add one at a time to see what happened. It just...
  14. L

    POE switch troubleshooting

    Thank you. I took one of the cameras and connected directly to the router with a POE injector and it fired up. It was strange since ALL of the cameras are out despite the fact the switch lights up. I think I will replace the switch and see what happens. I tried using a camera which is only...
  15. L

    POE switch troubleshooting

    I have a POE switch connected to 6 outdoor cams. I was going to add a new camera so I used an additional POE injector to set up the camera indoors. I connected the new IP cam to the router re no problems. However, all of the other cameras died and could not see any cams on the network. I...
  16. L

    Troubleshooting Camera Connection

    Thank you. These work great. Passthroughs are much easier.
  17. L

    Troubleshooting Camera Connection

    are there any recommendations for a good, relatively cheap POE tester? I have one cable that is problematic. The camera worked initially for over a year. To be sure, I swapped it out with another one. I confirmed that both worked by using a known good connection . I used one of these...
  18. L

    DH-SD49225XA-HNR PTZ. lost connectivity

    Thank you for your patience and help. I have done the following: 1. I brought the camera inside and connected to a external POE injector and placed in on my network. It powered up - I could see the cam and ping it but could not get to the log in screen. 2. I reset the camera and then used...
  19. L

    DH-SD49225XA-HNR PTZ. lost connectivity

    NO I cant ping or find with the Dahua tool. the other cable comes from a POE switch and powers up the other camera . Both are outside cams and come up from the POE switch in the basement
  20. L

    DH-SD49225XA-HNR PTZ. lost connectivity

    I have a DH-SD49225XA-HNR PTZ. which had worked flawlessly ( as did all my dahua cams). We have another rainstorm yesterday and now I see no connectivity I checked the ethernet cable with a POE tester and also swapped it with a known good outside cable. the device will power on, I can...
  21. L

    DH-SD49225T-HN and unable to view in Chrome

    thank you. Actually my graphics card did update so that could be it. no new firewalls but noticed the same behvavior I think the camera icon actually means time to upgrade so will have another sale for andy.
  22. L

    DH-SD49225T-HN and unable to view in Chrome

    Thank you I tried IE ( old version and new) as well as the Chrome IE TAB extension. It used to work fine with IE as do all of my dahua cams. I saw the above icon which I also get temporarily before the picture loads It used to work all the time and I haven't done any changes.
  23. L

    DH-SD49225T-HN and unable to view in Chrome

    I have both a DH-SD49225T-HN and a DH-SD49225XA-HNR PTZ. I can see the newer one on chrome without issues but no longer seem to be able to see the 49225T on Chrome browser ( or IE or Brave) I get a " Adobe Flash blocked" I can see the cam on BI and on smart PSS but cant seem to access it...
  24. L

    new Dahua System recommendation

    Thank you so much. I have been using Blue IRIS with the old DVR. Based on the recommendations here, I purchased a POE switch and added a few POE cams to my existing Blue setup Iris andboth cams work great. I added tje DAHUA cam from Andy and it also works great. It took a bit of work to...
  25. L

    new Dahua System recommendation

  26. L

    new Dahua System recommendation

    I am using windows 10. We also have occasional power failures but I changed the settings in the BIOS and I use splashtop to log in remotely. Granted it only happened 2 or 3 times in the past year. Of course, it is usually doing a storm or somtehing and this is when you really want to check...
  27. L

    new Dahua System recommendation

    Thanks for the recommendation. That does make sense. I currently have the AMDV4M16 and use that in conjunction with Blue Iris. I know it is not totally rational. I spend a fair amount of time aware from the house and inevitably Windows will update and shut down the computer. But I can...
  28. L

    new Dahua System recommendation

    I have a current AMCREST 4k system. It has its issues but for the money and I happy and it is fit for purpose. I have to replace a few cameras ( It is still cabled) so I thought I would bite the bullet and install some Cat6 at the existing camera site. I am looking at the Amcrest 4K UltraHD...
  29. L

    Upgrading Samsung SDH-C74040

    Thank you so much. Our house is very complicated so rewiring is not an option. I didnt see much difference with the picture quality when I upgraded to the Samsung. Is there a recommended model of the Dahua? I have analog (BNC) cabling currently to the outside and a few IP cams on the interior...
  30. L

    Upgrading Samsung SDH-C74040

    I have an existing SDH-C74040 1080P system. It has a lot of older cameras with exisiting analog (BNC) cables and cameras. I feed the camera to Blue Iris ( it works great) and I can monitor two houses plus my IP cameras) perfectly. I do NOT want to rewire the house. Is there an improvement...
View older results
Top Bottom