Search results

  1. A

    DS-7608NI-E2/8P can't access - new

    Can you provide links where you have found these boards?
  2. A

    4G/LTE connection and NVR for 4mp Hikvision?

    Your switch selection is fine. Mind you the two pitfalls. It has only 4 PoE ports and it is not managed. Therefore in future, if you add cameras you need additional PoE switch and if any camera is not accessible remotely because it has seriously crashed, then you can not power cycle remotely the...
  3. A

    4G/LTE connection and NVR for 4mp Hikvision?

    Add four cameras of your choise to any 7604NI-Ex NVR through any 100Mbps unmanaged switch and stirr (not shaken!!!) with any modem router of your taste. Enjoy a future proof system. Budget cameras = 4 x 300 Euros approx. NVR = 1x 250 Euros 8 port unmanaged switch = 20-30Euros 1x modem router 1x...
  4. A

    4G/LTE connection and NVR for 4mp Hikvision?

    Never put too many eggs in one basket. If you drop the basket, you will break most if not all your eggs. Specifically... If the internal PoE switch in an NVR faults, then you must purchase again the NVR. The integration of the funtionalty of a separate PoE switch to a general configuration does...
  5. A

    New Firmware for DS-7600NI-SE 7600NI-V(VP)

    The hard disk smart info is available in most firmware versions at the native (or HDMI interface, I do not know how else to call the appliance interface), BUT it is not availble in the web gui interfaceof at least version 3.0.9. @alastaistevnson: On which NVR and with which firmware do you see...
  6. A

    I need help - Abnormal Shutdown

    https://www.ipcamtalk.com/showthread.php/7830-New-Firmware-for-DS-7600NI-SE-7600NI-V(VP) Check this post
  7. A

    New Firmware for DS-7600NI-SE 7600NI-V(VP)

    The problem with the sporadic and not systematic abnormal shutdowns may have to do with the handling of possible bad sectors of the disk. The hard disk when it recognises a possible bad sector tries to recover the sector and if not possible to rellocate the data to a new sector and mark that...
  8. A

    30 Camera system, Separate Networks, remote viewing

    The HIK NVR gui has limited access to a subset of camera features and configuration. For example if you plan to generate email alerts triggered from the camera motion detection, you need to have access to configure the email settings in the camera. Also if you want to reboot a specific camera...
  9. A

    30 Camera system, Separate Networks, remote viewing

    In this configuration, how are you going to access the camera's web gui interface for camera configuration from the LAN side (10.14.3.0) ?
  10. A

    5.3.6 Firmware

    So can you summarize the different settings that eliminated your ... "leg phenomenon"?
  11. A

    5.3.6 Firmware

    Even if you select constant bitrate, the video quality should be preselected at setting "Highest" and you should see it. If you cannot see the video quality settings, change your bitrate type to Variable and then see if you can select Highest video quality. If you are seeing the camera through...
  12. A

    5.3.6 Firmware

    Your moving legs do not have sufficient contrast from the background and therefore the compression algorithm canot diffferentiate them and compresses them as if they were the static background. What is the setting of the video quality in the camera settings? It should be at the highest possible...
  13. A

    Transcoded Stream options in playback menu

    In a 7604NI/SEP NVR with firmware 3.0.9, if the web components plugin of the NVR are not installed, in the playback screen and to the left of the reverse slow button, another button appears that displays the playback transcoded stream options like resolution, bitrate and framerate. This button...
  14. A

    Hikvision - Noise/Quality Problem - $50 Reward!

    Of course the oscilloscope does not measure or display current, every electronics engineer knows that. However if you pass the supply through a very small resistor and measure the voltage drop on that resistor, then you can measure AND display the current drawn from the camera. HIK cameras use...
  15. A

    Hikvision - Noise/Quality Problem - $50 Reward!

    The 12V power supply fed through the pig tail and the 48V from the Ethernet PoE cable are not treated the same in the electronics of the camera. Therefore it is possible to have different electronics behaviour when you switch from the 12V to the 48V. The problem is poor supply regulation of the...
  16. A

    Email alerts not working when Hikvision cameras connected to DS-7608NI-E2/8P

    @flyleclair You have not specified us which NVR and camera models you have and what are the four characters in the middle of the serial number that indicate if the camera and NVR firmware are for the western world (market) or for the chinese market. Certain NVR firmware versions have bugs...
  17. A

    FPS and bitrate

    If you set the iframe interval at the same fps as the video frame rate, then you will notice the flashing (I would call it judder) every one second and therefore it is visible. If you set the iframe interval at 100 and the video frame rate at 20 then you will notice (very difficult) the judder...
  18. A

    What is the de-bricking process for HIKVision camera and NVR firmware updates?

    Ensure that the both PC/laptop and NVR are the only ones connected to the switch. Avoid using a router with a DHCP server running and also do not use a crossover cable connecting the NVR directly to the PC/laptop. In the past I have sniffed in the network that if the PC/laptop LAN port does not...
  19. A

    Using 2 HDD in NVR

    As the two months interval is approaching, please update us if the NVR will record beyond the 4TB mark.
  20. A

    Adding Camera to NVR which is located elsewere

    1) Yes it is possible but the solution is network related. In other words you must define static routes in the routers of the two LANs to communicate with each other. Then every camera at LAN A must have its gateway set to the router of LAN A and at this router you must define a static route...