Search results

  1. R

    Bricked SV3C IP 1080P Firmware help

    tftp rootfs.squashfs TFTP from server 192.168.0.120; our IP address is 192.168.0.124 Filename 'rootfs.squashfs'. Load address: 0x0 Loading: ################################################################# #################################################################...
  2. R

    Bricked SV3C IP 1080P Firmware help

    What if were tftp the entire firmware and do the "update firmware", i would just need the correct address update - update image, u-env, factory, u-logo, user, kernel, rootfs-r, rootfs-rw, firmware/firmware_f Usage: update type address size verify - start update image application at address 'addr'
  3. R

    Bricked SV3C IP 1080P Firmware help

    sonix # update rootfs-r 0x1B0000 0X5E0000 1 update rootfs-r 0x1B0000 0X5E0000 1 ## Update rootfs-r Starting ... serial flash erase offset = 0x350000 len = 0x0 Serial Flash Erase: done serial flash erase offset = 0x1000 len = 0x1000 Serial Flash Erase: done verify: err size ## Update rootfs-r...
  4. R

    Bricked SV3C IP 1080P Firmware help

    also, i never fully gave you the boot sequence after i inserted the code, just a screen shot, so maybe you can extract more from the full text ## Booting kernel from Legacy Image at 00008000 ... Image Name: Linux-2.6.35.12 Image Type: ARM Linux Kernel Image (uncompressed) Data...
  5. R

    Bricked SV3C IP 1080P Firmware help

    update - update image, u-env, factory, u-logo, user, kernel, rootfs-r, rootfs-rw, firmware/firmware_f Usage: update type address size verify - start update image application at address 'addr' ERROR: update cmd parameter num err
  6. R

    Bricked SV3C IP 1080P Firmware help

    I'll get you the prompts as soon as I have access to my computer. but it may be a few hours.
  7. R

    Bricked SV3C IP 1080P Firmware help

    I'm pretty confident in using tftp, but i hadn't found the "uImage" to upload, because that's the file it looks for, and also, i wasn't sure what memory address to overwrite after. But I'm good at following directions and I'll give anything a try. I would need to know how to use the update...
  8. R

    Bricked SV3C IP 1080P Firmware help

    Sorry for the late reply. sv3c.com/firmware.html has the firmware, but when i change the extension to that of a compress file, i can see the file inside, but it says it's corrupted. I tried changing the header with a hex editor, repairing the file as zip, but nothing get's me a successful unzip...
  9. R

    Bricked SV3C IP 1080P Firmware help

    i inserted the "init" code on the good camera and i get this can I extract "uImage" from this device and tftp it to the bricked one?
  10. R

    Bricked SV3C IP 1080P Firmware help

    No SD or USB of any kind
  11. R

    Bricked SV3C IP 1080P Firmware help

    spi spi - spi - Serial Flash sub-system Usage: spi spi erase offset len - erase 'len' bytes from 'offset' spi read addr offset len - read 'len' bytes starting at 'offset' to memory at 'addr' spi write addr offset len - write 'len' bytes from memory at 'addr' to flash at 'offset' It...
  12. R

    Bricked SV3C IP 1080P Firmware help

    nand nand - NAND sub-system Usage: nand info - show available NAND devices nand device [dev] - show or set current device nand read - addr off|partition size nand write - addr off|partition size read/write 'size' bytes starting at offset 'off' to/from memory address 'addr', skipping bad...
  13. R

    Bricked SV3C IP 1080P Firmware help

    and yes, the init=/bin/sh did stay saved.
  14. R

    Bricked SV3C IP 1080P Firmware help

    No # after kernel has started.
  15. R

    Bricked SV3C IP 1080P Firmware help

    Disconnected it for a few minutes, link is back up
  16. R

    Bricked SV3C IP 1080P Firmware help

    U-Boot 2011.09 (Aug 09 2016 - 17:07:22) DRAM: 64 MiB MMC: SD Card not detect mmci_host_init error - -1 SPI FLASH: 8 MB In: serial Out: serial Err: serial GPIO[2] is high Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at 00008000 ... Image Name...
  17. R

    Bricked SV3C IP 1080P Firmware help

    I can get a # if i inturrupt boot, but the ethernet is not working
  18. R

    Bricked SV3C IP 1080P Firmware help

  19. R

    Bricked SV3C IP 1080P Firmware help

    Nothing, same as before, but now with the "eth0: link down" meaning it believes the ethernet is disconnected.
  20. R

    Bricked SV3C IP 1080P Firmware help

    I'm also noticing that the Ethernet is completely solid, won't blink and Putty now says, "eth0: link down"
  21. R

    Bricked SV3C IP 1080P Firmware help

    I don't believe I do. I do have a NAS that I use as a share folder. (Sorry, my programming knowledge is not too up-there) I was able to update the bootargs printenv baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/bin/sh mem=64M isp=11M vc=11M vo=0M...
  22. R

    Bricked SV3C IP 1080P Firmware help

    there is no difference in bootargs for the working cam
  23. R

    Bricked SV3C IP 1080P Firmware help

    This is what I get with the variables for the Bricked camera, should i see what the bootargs are for the working camera? Printenv printenv baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/linuxrc mem=64M isp=11M vc=11M vo=0M...
  24. R

    Bricked SV3C IP 1080P Firmware help

    I tried to upgrade the firmware via the provided OV file from their website and it bricked. I am able to get info off the Serial UART connection on Putty and it says that it's looking for "uImage". How can I extract the uImage file from the good camera? I know how to get it back in the...
View older results
Top Bottom