Search results

  1. J

    EmpireTech aka Dahua LPR Settings

    I think it's because of daylight saving time or something, need to check - i have a feeling the camera time is one hour behind. So night mode is kicked in now an hour later. Please see video of a motorcycle that came by.
  2. J

    EmpireTech aka Dahua LPR Settings

    oh you know your right - i dont know why the night mode with the B/W setting did not kick in per schedule
  3. J

    EmpireTech aka Dahua LPR Settings

    Please see the attached video, it's actually a car pulling out of the driveway slowly but as you can tell the image is not very clear of the plate. Now in terms of having no detection through Unifi AI port at night, that seems to be an issue others have noticed. Still I would like to be able...
  4. J

    Unifi AI Port- Works great!

    So the daytime features are working amazingly well with the AI Port on both the Dahua PTZ and Dahua camera serving as an LPR. As a previous poster on the previous page shared the Unifi is not picking up anything in night mode at all. No alert/trigger/etc. Seems like others have reported the...
  5. J

    EmpireTech aka Dahua LPR Settings

    Thanks - is this focus speed section to adjust? I just found the speed that you and Flintstone61 were referring to I believe.
  6. J

    EmpireTech aka Dahua LPR Settings

    Thanks for the help. I’m running into some issues with nighttime capture—no detections are being sent out, and during manual review, I can see the car headlights, but everything else (especially the license plate area) is just a blur. Quick question: where can I find the manual focus speed...
  7. J

    Unifi AI Port- Works great!

    Got it - so Protect will trigger its own notifications then based on it's setup? I have been trying to figure out in this Dahua the difference between AI setup, Alarm (Enable), and then Video Detection (Enable), and Smart Motion Detection (Enable). Right now the only thing i had set was the AI...
  8. J

    EmpireTech aka Dahua LPR Settings

    Thanks - appreciate it, I will use it as a baseline and make adjustments.
  9. J

    EmpireTech aka Dahua LPR Settings

    Thanks - I think that worked
  10. J

    EmpireTech aka Dahua LPR Settings

    Ok this seems to be frustrating i set the night mode to 60Hz and then the picture remains at that B/W contrast. Now few minutes later i go back in again to view it's switched to 'Outdoor' anti flicker type view. What I think is happening is it is switching to the Day view and that is what is...
  11. J

    EmpireTech aka Dahua LPR Settings

    I just set the Anti-Flicker to 60Hz and it went away, thought now i see the grass as a high contrast B/W. Let's see how plates look - the shutter automatically went to 1/120 by the way if i set it to 60Hz
  12. J

    Unifi AI Port- Works great!

    You know whats interesting until you wrote about capacity, I was wondering i never saw the 'Pair' option next to the other Dahua. Now when I went to the device on the Unifi dashboard, i see capacity was like 1/3 or something like that, i then clicked manage and now was able to associate the...
  13. J

    EmpireTech aka Dahua LPR Settings

    At night I have a street light which is causing this flickering wave or motion on the left - any suggestions on how best to handle it? Also, i drove my car through and even though i don't have snapshots or other components working, i paused the video to see if i could take a look at the tag but...
  14. J

    Yet another Rekor Scout price increase to $12 per camera

    Thanks - signing up for it to try. What’s best connectivity option you would recommend? As you have been helping me a lot? Very grateful for it - the Dahua I setup I was thinking on the record or snapshot feature if I should just store it to a NAS or Cloud then use those pictures to push to...
  15. J

    Yet another Rekor Scout price increase to $12 per camera

    Are there any alternative solutions?
  16. J

    Unifi AI Port- Works great!

    Thank you - I will have to look up if I can setup Rekur Scout OpenALPR to complement the Unifi setup with that camera. Now one thing I noticed is when i connected the AI Port it only allowed AI detection one third-party camera. I believe it was suppose to be for up to 3 non Unifi cameras...
  17. J

    EmpireTech aka Dahua LPR Settings

    Thanks on #1 will have to see my options to lower the base and point upwards. I pushed it all the way to the top basically hitting the fascia and then zoomed in that core. Attached is what it looks like for now. Now I have the Unifi system, I installed the AI Port and have paired it with the...
  18. J

    EmpireTech aka Dahua LPR Settings

    Thank you On #1 that's the highest i can place it pointing upward as now I am hitting the fascia, I have tried to push it higher but that is now just a limitation as long as I can capture plate with the coverage I am good. On #2 settings, will give that a go, I have zoomed out a bit to...
  19. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    Just an update here, this is resolved, I am going to seek setting recommendations in this post. Thanks for all the help. https://ipcamtalk.com/threads/empiretech-aka-dahua-lpr-settings.74294/post-955222
  20. J

    EmpireTech aka Dahua LPR Settings

    Hi - I bought the IPC-B52IR-Z12E-S2 and am attaching my settings, would appreciate recommendations. One question I have is it is possible to have the picture zoom in on the upper half of the screen, unfortunately I can't go higher in placement of camera, but it captures my front lawn more than...
  21. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    I am searching the threads for setting recommendations, I found a couple I will try. If you have any recommended settings for day and night would appreciate it I’m about 90 ft from where camera is positioned to the cup de sac It’s day time right now and in Edge I can see the picture but...
  22. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    That was it - the username and password of the NvR got set and now was able to login and change the IP It worked - thanks
  23. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    It is a managed switch What is the default username and password I connected via Ethernet and the config tool worked but can’t change IP So Wittaj as your suggestion I’ve changed my IP to 10.1.1.20 to come on this 10.1.1.1 network but now the manual provided including web link doesn’t tell me...
  24. J

    Recommendation on LPR NVR for EmpireTech IPC-B52IR-Z12E-S2

    Hi - basically all my cameras are on the Unifi system, and I am also getting an AI Port. Now, I got the EmpireTech IPC-B52IR-Z12E-S2 for LPR captures. What is a recommended NVR or setup to be able to capture images/clips from that camera? Sorry for all the noob questions on this as previously...
    • joogle
    • Thread
    • Replies: 1
    • Forum: LPR
  25. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    Yes that did not detect the IP even when I went to the settings to set a range from like 10.1.1.0 to 10.1.1.75 Ah okay so I have a laptop with Ethernet , so I disconnect from the Lorex nvr and plug the camera it into the Unifi switch already has pod - then the laptop that has Ethernet I...
  26. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    I actually want to avoid the hard reset as I’m exhausted today from all day installation for this I could do it but I also need to get the other camera out of its IP too and that’s a PTZ which I know is a harder reset as I would have to take the whole thing off If I set the Lorex switch IP...
  27. J

    Need Help with IP assignment on Dahua Empire Tech Cameras

    How do I get this camera which I accidentally connected to the Lorex NVR out of this static IP? I can’t access this camera below. Please see the PDF with the screen shots. I bought a new EmpireTech IPC-B52IR-Z12E-S2 but accidentally connected to a Lorex NVR which I am getting rid of but the...
  28. J

    Best PTZ with License Plate Recognition

    I just went ahead and bought 5241-Z12E from empire tech, I believe the version now is EmpireTech IPC-B52IR-Z12E-S2. I may need your help once it arrives for setting recommendations. In terms of software, what can I run to be able to capture the plates? I don't mind buying a software would...
  29. J

    Unifi AI Port- Works great!

    has anyone tried the LPR cameras such as IPC-HFW5241E-Z12E with the AI Port? Does it create clips of the license plate recognition?
  30. J

    Best PTZ with License Plate Recognition

    A question i had on the POE splitter is then it auto assigns two IP addresses as well?
Top Bottom