Search results

  1. Tygunn

    Dahua NVR Reboots during the day

    Hmm, too bad the missing frames issue isn't fixed. I'll see if my experience mirrors this. I had a hard time getting the reboots to start up again on my system prior to the update as well. It seems like the motion detection turned off on the HIK on its own, and then the problem went away. It...
  2. Tygunn

    Dahua NVR Reboots during the day

    I will do some IVS event testing tonight and see if the missed frames problem still persists. I have seen no reboots so far, however I haven't got the HIK hooked up to the NVR at the moment. I'm planning to reconnect it once I've verified the NVR is relatively stable without it.
  3. Tygunn

    Dahua NVR Reboots during the day

    So far stable with recording IVS events from just the Dahua cameras. I'll try re-adding the Hik in a few days and see if things keep being stable.
  4. Tygunn

    Dahua NVR Reboots during the day

    The other change from my last setup is I do not have the hik camera added. I will have to add it to ensure the setup is comparable Sent from my Pixel XL using Tapatalk
  5. Tygunn

    Dahua NVR Reboots during the day

    Hmm, strange. SmartPSS now shows full footage now. Nothing seems to be missing. I'll keep an eye on it I guess. Hrrrm.
  6. Tygunn

    Need suggestion for front door

    I'm using a Dahua 2MP Starlight IR Mini Dome Network camera IPC-HDBW4231F-AS at my front door. It's pretty recessed. I run the camera flipped 90 degrees and it gets coverage right up from the door out into the yard. At night there is enough light from the front door lamp that I never run it in...
  7. Tygunn

    Dahua NVR Reboots during the day

    I didn't have a chance to check the logs before leaving in the morning, but I'm going to dig into it deeper when I get home. Blue Iris has full video for all cameras in that time, so it was definitely an NVR glitch of some sort. I'll have to try uninstalling the plugin on Internet Explorer and...
  8. Tygunn

    Dahua NVR Reboots during the day

    Well, I updated the firmware last night and reconfigured from scratch.. I don't know if this is an improvement. Lol. The Internet Explorer UI is also completely borked. Need to use the NaCL plugin in chrome now. So... yeah.
  9. Tygunn

    Dahua NVR Reboots during the day

    Got a feeling that would be the same as disconnecting the cams. :) Sent from my Pixel XL using Tapatalk
  10. Tygunn

    10 cameras - Intel Core i5-4690K Processor 3.5 GHz

    Yup, I've got my cameras hooked up to both. It seems to work just fine so far. Hah, yeah I hear you on the budget. My camera system is way over budget. I'm glad my old Intel i5 system works just fine with Blue Iris.
  11. Tygunn

    10 cameras - Intel Core i5-4690K Processor 3.5 GHz

    If you aren't returning the Dahua NVR you might as well just keep it recording 24/7, not triggered by events. Then you've got a backup, which is always nice. :)
  12. Tygunn

    10 cameras - Intel Core i5-4690K Processor 3.5 GHz

    I set up motion detection in two zones on my front cameras: 1. Street/sidewalk -- this captures cars going by and pedestrians walking around. I figure these would help in a situation where a neighbor asks, "Hey did you see a blue camry go by?" or something like that. 2. Premise intrusion --...
  13. Tygunn

    Dahua NVR Reboots during the day

    With these latest crashes the HIK camera was indeed connected to the NVR. I'm going to run with all cameras in record-only for a while and see how it goes. If after a couple weeks its stable I will try re-enabling the motion detect events on the HIKVISION camera and see if it causes any...
  14. Tygunn

    Dahua NVR Reboots during the day

    These are brand new hard drives, both used for less than a couple months. The SMART diagnostics for the drives shows no issues at all. However who knows. I wouldn't be surprised if the firmware on these NVRs is over sensitive to slight glitches in drives. I've NEVER had an issue in ~20 yrs...
  15. Tygunn

    Dahua NVR Reboots during the day

    I've sent Andy the log snippets as well as the full logs. Hopefully the software folks at Dahua can figure something out. For now, my NVR is set to only record continuous and to ignore events completely (motion and IVS). I'll see if that increases stability.
  16. Tygunn

    Dahua NVR Reboots during the day

    I'm sure that is what maps to 0x06? Hahah. I'll send to Andy none the less.
  17. Tygunn

    Dahua NVR Reboots during the day

    And the verdict is: dahua_backtrace_callback 11 [0mgetIntelliFrameInfo success !!!!!!!!!!! [33;40m07:52:48|[NetApp-310260] warn tid:1160 CWlanConfigInterface::WLanConnChk. no wlan devices ! [0m[0;32;32m[libvo] Resize blit cnt:114688 [mLIBHD_MSG : poll timeout. [37;40m07:52:48|trace...
  18. Tygunn

    Dahua NVR5216-4KS2 / NVR5216-16P-4KS2

    I have a 1400 VA and it claims it can go 1 hr 45 min. You should be able to find ups runtime calculators online. Sent from my Pixel XL using Tapatalk
  19. Tygunn

    Dahua NVR5216-4KS2 / NVR5216-16P-4KS2

    The difference is about 10w for all 10 cameras. Its not a lot.
  20. Tygunn

    Dahua NVR5216-4KS2 / NVR5216-16P-4KS2

    I have a 5216 with no built in POE and 2 x 4 TB WD drives, 10 cameras, a wifi router, POE switch, and cable modem all drawing ~70w.
  21. Tygunn

    Dahua NVR Reboots during the day

    Hahah, yeah, I hear you on that. My system has become a money pit.
  22. Tygunn

    Dahua NVR Reboots during the day

    Update: My wife is working from home and has been complaining about the intermittent loud beeping from the hallway. That means the NVR has rebooted a couple times today at least. When I get home I'll look through my logs and see what I caught!
  23. Tygunn

    Dahua NVR Reboots during the day

    That's a very good point. The big thing to note is that if we bought well tested PRO video cameras we'd be spending FAR more than we did on these. So as much as it sucks to have bugs, we've paid FAR less than what pro systems costs, so as the saying goes, "You get what you pay for". I've got...
  24. Tygunn

    Using JSON API to Mail Snapshots

    I'm going to experiment with these APIs myself. The ability to snag a capture using the APIs would help with my goal to use a SmartThings door/window sensor on my mailbox to trigger a snapshot from the camera facing the mailbox.
  25. Tygunn

    Dahua NVR Reboots during the day

    No crashes so far. Of course! It seems the Heisenberg uncertainty principle applies!
  26. Tygunn

    Correct RS232 Console settings for Dahua NVR?

    Wow, the logs are VERY chatty. Continual logging about WLAN connectivity checks: 23:07:11|[NetProt-258532] error tid:1140 [getAddrInfo:74]Invalid param! 23:07:11|[NetApp-310260] error tid:1140 Src/P2P/P2P.cpp,680: IDNSManager::instance()->getaddrinfo failed getIntelliFrameInfo success...
  27. Tygunn

    Correct RS232 Console settings for Dahua NVR?

    Yup that's exactly what I'm doing. Hopefully there is something useful to be gleaned. Sent from my Pixel XL using Tapatalk
  28. Tygunn

    Correct RS232 Console settings for Dahua NVR?

    I've set the dh_keyboard value to 0 and rebooted the device. Now I'm definitely seeing all the stuff I would expect to see in the console. Okay, as a reference, here is all I did: Based on: Dahua Enable Telnet First, on NVR change admin password to "admin"...
  29. Tygunn

    10 cameras - Intel Core i5-4690K Processor 3.5 GHz

    Done and done. I'm already loving the extra configurability of Blue Iris. Being able to configure separate motion zones and trigger on them is really nice. Lets me check at a glance if someone came to the door vs a car driving by.
  30. Tygunn

    Correct RS232 Console settings for Dahua NVR?

    Derp, changed password back to "admin", and I can use Telnet now. Hahaha.
Top Bottom