Search results

  1. S

    New Reolink Wired POE Doorbell Cam ?

    Yes no BI audio.
  2. S

    New Reolink Wired POE Doorbell Cam ?

    I lost the audio recording ability when the camera is activated by motion detection.
  3. S

    REOlink POE wired doorbell cam audio question

    I guess I assumed a bit there
  4. S

    REOlink POE wired doorbell cam audio question

  5. S

    REOlink POE wired doorbell cam audio question

    In BI? The app? or the IP interface? Item No.D340P Build No.build 2508071283 Hardware No.DB_566128M5MP_P Config Versionv3.0.0.0 Firmware Versionv3.0.0.4662_2508071283 DetailsS10E1W0TC0
  6. S

    REOlink POE wired doorbell cam audio question

    I had a ring camera, and everything anyone got close to the door, the camera recorded it and the audio was always on while it was recording and crystal clear. I'm using the doorbell with Blue Iris. I have checked all the sound settings on my REOlink POE doorbell camera and don't get nearly the...
  7. S

    One camera goes missing then comes back

    I did use the weatherproof cover on the external connector, the other end is inside the house. I'm thinking it may be a BI issue
  8. S

    One camera goes missing then comes back

    Its POE, I could just swap with another port and see.... but I just happened to see this before it came back..... I just saw that the status in BI says Check FPS and key rates.
  9. S

    One camera goes missing then comes back

    I have several of the IPC-T54IR-AS 2.8mm S3 Cameras from EmpireAndy I bought in 2022. Everything was setup and running great, BI (ver 5) did work with all cameras. Yesterday, one camera seems to come online then drop back off. I just checked and BI says signal loss, but going directly to the...
  10. S

    New Reolink Wired POE Doorbell Cam ?

    I have a REOLINK video doorbell and I dont really get much volume from the audio in the recordings. I had a Ring camera and it was very loud and clear. I have the Reolink set up on a POE network and also record through BI. Even replaying the history recorded to the SD card I can barely make...
  11. S

    REOLINK Video Doorbell

    I have a REOLINK video doorbell and I dont really get much volume from the audio in the recordings. I had a Ring camera and it was very loud and clear. I have the Reolink set up on a POE network and also record through BI. Even replaying the history recorded to the SD card I can barely make...
  12. S

    REOLINK POE doorbell camera does not record audio on motion events

    I have a POE REOLINK doorbell camera. It works as expected when you push the doorbell button and it records good audio with the video. But when motion events trigger the recording, I get no sound. The record audio is checked in settings, and the speaker icon shows the speaker is on but still...
  13. S

    WTB: DSC PTK5507 keypad

    Anyone have a new or used DSC PTK5507 keypad they want to sell?
  14. S

    DSC DLS Programming Software

    What version do you need? I can send you the one I have
  15. S

    Recording for same day only?

    Done, and 10TB drive on the way.
  16. S

    Recording for same day only?

    Its not that big.... only a 1TB Guess I need to go shopping......
  17. S

    Recording for same day only?

    OK, I increased it to 300... or do you think it should be more?
  18. S

    Recording for same day only?

    I dont think thats it... its set for 10 days
  19. S

    Recording for same day only?

    When I go back to look at the videos stored in a folder on the hard drive, I noticed that the most that will be there is a single day worth of recording. Is there an overwrite setting? I cant figure out why I dont have several days worth of recordings. I have 15 POE Dahua ( well Dahua like I...
  20. S

    DSC 1864 setting no activity arming timer

    Im trying to set my panel to auto arm on inactivity. I want the panel to arm should I forget to arm the system when I leave. I am using DLS to connect to the panel, and am in [181] and [191]. It does not seem to arm, I did manage to have the keypads to give a solid audio tone while in auto...
  21. S

    Webserver stopped working

    Tried pinging it..... C:\>ping www.s********t.ddns.net Ping request could not find host www.s*********t.ddns.net. Please check the name and try again. Using portchecktool.com I know it can be seen from the outside... Success! I can see your service on *...* on port (81) Your...
  22. S

    Webserver stopped working

    I will look into it. I am paid up for a year, so Im trying to work on getting this figured out.
  23. S

    Webserver stopped working

    The way I read it, then I would lose the ability to send the video feeds to no-ip or is there a way to automatically login to the VPN? My TP-Link router does have a VPN setup.
  24. S

    Webserver stopped working

    After several years of no problem, the webserver seems to have stopped working. I use no-ip as well. The IP addresses of the computer, and the outside IP have not changed. The computer is port forwarded correctly. I do have the internal side working, but for some reason, I cant get the...
  25. S

    Dsc 1864 slow response to zone closing?

    No changes. It just started having a delayed (more than 30 seconds) response. I just replaced the contact end. The magnet still seems to work OK. Appears to be working as it should though.
  26. S

    Dsc 1864 slow response to zone closing?

    Yes, it is on a zone extender.
  27. S

    Dsc 1864 slow response to zone closing?

    No, wired contact, wood door.
  28. S

    Dsc 1864 slow response to zone closing?

    I installed an 1864 and once it was up and running, everything worked great. Suddenly one zone is VERY slow to respond to the zone opening and closing. Its a door using a recessed remote. I can open the door and for the most part it responds instantly. But more often than not when I close...
  29. S

    DSC 1864 - Wired glass break sensors always keep the zone open

    I will try it..
  30. S

    DSC 1864 - Wired glass break sensors always keep the zone open

    I will try that. The wiring is good, it has continuity and resistance. When I remove the power, it opens. I tried connecting the wires and it does react as it should. I have on e resistor on each glassbreak (there are 2 of them, and 2 wires)...each to their own zone, and both C contacts...
Top Bottom