Search results

  1. jmcu

    Review-Dahua SD1A203T-GN Starlight Mini PTZ

    Only 2 that I see...
  2. jmcu

    Holy 60x Zoom Batman! Dahua SD10A260WA-HNF

    Waiting on pricing @EMPIRETECANDY ... :screwy:
  3. jmcu

    Dahua NVR HDMI output has purple hue and lines

    Move the HDMI cable around a little and see if it goes away, I know you said you changed it out but my same issue was with the cable.
  4. jmcu

    Auto Tracking Dahua PTZ

    I have not been able to get IVS to work in any tour mode, only when utilizing the timed task to a preset- PTZ > function > time task.
  5. jmcu

    Night vision settings for Dahua PTZ

    Your welcome, If you look at the dedicated LPR section of the forum you will find much useful info if you are looking to use for plates, but there are better cams used for this. The smart IR is suppose adjust according to what it thinks is best, it works as a variable IR changing as needed. The...
  6. jmcu

    Night vision settings for Dahua PTZ

    From what I have experienced from the PTZ's for detecting plates is that there is too many variables for the PTZ to get it right without being set up for a dedicated LPR. Anything reflective need to be adjusted manually and if not set up that way there just isn't time for the camera as it is...
  7. jmcu

    Auto Tracking Dahua PTZ

    You can have the PTZ go to a preset as a timed function and if that preset has a IVS rule set up it will track. It will not work as a tour, pan or scan, while thew camera is moving.. As stated above, with a NVR you can call up a PTZ with another camera and have the ptz track - if there is a...
  8. jmcu

    Review-AI NVR 4216-I

    Thanks looney2ns, I been waiting to see this AI..
  9. jmcu

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.800.0000000.5.R.190827

    He may have pulled it, there were a few issues with it...
  10. jmcu

    ipcamtalk - shoutout

    Just a shoutout for the ipcamtalk - owner(s), staff, moderators, vendors, reviewers and contributors to say what a great site this is and THANKS A Lot for hosting / contributing to it !!! With all the helpful information, tools, experience, people helping people, there is something for everyone...
  11. jmcu

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.800.0000000.5.R.190827

    I should of updated my post... I have 1 SD-59430 that works just fine with this firmware and 1 that must of had a bad update. The PTZ controls are wacked out along with the presets. This firmware has baseline 2 that does not allow you to downgrade below 2.800.XXX. There is nothing below...
  12. jmcu

    Outdoor PTZ recommendation

    If I were to pick the cams you listed SD6CE230U-HNI, SD59225U-HNI or SD49225T-HN, they would be in that order. I think the build quality of the 6ce is much better than the black face PTZ's. All these cams would be great choices but I would prefer a IP 67 / IK 10. I know you said night...
  13. jmcu

    Help Surv Co Owner Design his home system?

    lol.. you funny BRF.. Cat 5 is fine to use.. I buy 5e when needed..
  14. jmcu

    Dahua IPC EASY unbricking / recovery over TFTP

    Trying to downgrade a PTZ firmware that I am able to boot up and log into but the operation is almost unusable. With the new firmware you can not roll back below base point 2 the normal way. I used the TFTP mode with the run up command for a update.image file. I have a failed to Updatr...
  15. jmcu

    Look at all these cameras

    lol ..Love that they put the menu on the front door...and offer wheelchair lift service.
  16. jmcu

    New RCA HSDB2A 3MP Doorbell IP Camera

    Same.. no notification with doorbell press.. when it did ( 1 out of 50 ) no live video would load. This is the EZVIZ version.
  17. jmcu

    Dahua PFB203W vs PFB204W

    The difference between the 2 mounts are the location of the predrilled holes - so the camera can mount to them, depending on your camera. A JB can be used to keep your connections weather proof and some will provide a flat area to mount the camera to.
  18. jmcu

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.800.0000000.5.R.190827

    Updated - SD59430U-HNI - NO good for me Camera PTZ controls backwards when/ if it moves, presets are random locations. Reset to default and did factory default with no resolve... Can not roll back firmware...
  19. jmcu

    Can only get 1 PTZ to work in IDMSS app

    I can confirm IDMSS works with more than 1 PTZ cam.
  20. jmcu

    PTZ presets

    "Time Task" will go to presets at a set time for the Dahua PTZ's.
  21. jmcu

    SD29204T-GN latest Firmware ?

    Yes, I agree it is not a solution. It will be interesting to see how they will resolve it.
  22. jmcu

    SD29204T-GN latest Firmware ?

    Try to clear your browser's cache and reload the page.
  23. jmcu

    Sold - For Sale Dahua SD59430U-HNI PTZ

    PM sent...
  24. jmcu

    Mobile Dahua Wall Display..

    Thanks everyone... lol... and that was my happy face..
  25. jmcu

    Mobile Dahua Wall Display..

    Here is my mobile wall cam that I put together for display. I made a video to compare the image capture between cams, not a real fair test but interesting anyhow and the actor I hired was pretty cheap. All cameras are on default settings recording at 30 FPS at 8192 Kbps. (very high ) IR set to...
    • jmcu
    • Thread
    • Replies: 6
    • Forum: Dahua
  26. jmcu

    Smart PSS - no playback from NVR 52XX-4k42

    I can confirm the issue isn't related to the 4.0 update, I have rolled back the firmware and still no live view. Also uninstalled and reinstalled Smart PSS and it still does not work.
  27. jmcu

    Smart PSS - no playback from NVR 52XX-4k42

    Has anyone had a issue with playback working with Smart PSS to the NVR 52xx-4ks2 after firmware 4.0/.1 ? My live view or playback does not work with Smart PSS to the NVR. If on the camera directly there is live view via PSS. I was not having trouble pulling clips from NVR with PSS until after...
  28. jmcu

    Short-review IPC-HDW5241H-AS-PV Active Deterrence Eyeball AI Cam

    Correct..
  29. jmcu

    Short-review IPC-HDW5241H-AS-PV Active Deterrence Eyeball AI Cam

    Yea, I know how I have to shut it off, I was looking to see if I missed something. It's far from the ideal way to have to do it, I hope they fix it.
  30. jmcu

    Short-review IPC-HDW5241H-AS-PV Active Deterrence Eyeball AI Cam

    Is there a way to shut off the alarm ( light or siren ) after activating it with iDMSS or the gDMSS ??
Top Bottom