Search results

  1. L

    Camera image has purple tint after installation

    Have you tried adjusting the image settings for the camera?
  2. L

    Hey guys, SATA question...

    Yes. I am using two Noctuas. My unit has two fans in it so since I was wanting to get rid of the loud whirling noise the NVR makes when on, I changed them both out. It would be pointless to change one fan to a quieter one while the other is still super loud. If you only have one fan in your...
  3. L

    Hey guys, SATA question...

    I have replace the fan's in my Hikvision with Noctua's also. There is one in the power supply and another mounted on the case next to the main board. Night and day difference.
  4. L

    Hikvision ip camera

    Does your camera have the reset button on it? If it does then it is the 30-30-30 method. 1 - Push button for 30 seconds 2 - Unplug power while still pushing the reset button 3 - Plug power back in while still pressing the reset button. 4 - Let go of the button and it should reboot and go...
  5. L

    New Hikvision user from Australia

    Go to the schedule and you will see the options for the Pre/Post record settings. There you will be able to set how many seconds of recording.
  6. L

    Google home and hikvision

    Nope. Hikvision cameras don't have that ability. With that being said.... EZViz which is Hikvision's cheaper, consumer line I believe has that ability. Maybe there is a way to get it to work?
  7. L

    Honeywell Performance series Nvr reset.

    Ah..... So right here.....
  8. L

    Honeywell Performance series Nvr reset.

    Is this what you mean for doing a hard reset? Just put a paper clip on these two holes? This is the only two holes I see on his motherboard. What is the procedure to do it?
  9. L

    Cctv video

    As far as I know it is all or nothing. Cannot delete just a certain clip. Can only reformat (initialize) HDD which deletes everything.
  10. L

    Can Hikvision OEM devices be force-updated vanilla firmware using TFTP?

    It works if loading one OEM's firmware on a different OEM's device.... Loading Hikvision firmware on an OEM device was a no go.
  11. L

    Can Hikvision OEM devices be force-updated vanilla firmware using TFTP?

    I have tried OEM firmware from a different OEM brand and it works. The one I used was a WH model (Brovision) NVR and updated it to the LTS firmware and it took the firmware with no issues just by going into the local monitor and plugging in the flash drive with the firmware. Just be VERY sure...
  12. L

    Hikvision DS-7608NI-I2-8P owners please advise

    So you are wanting to capture a picture when you are watching playback? There is an icon with a camera during the liveview/playback that you can click to take a snapshot. For the motion detection you can select different regions. Just instead of clicking on the full screen button, make...
  13. L

    Hikvision OEM NVR - Flashing firmware experiment

    Wonder if I would be able to put the official Hikvision firmware on it. Looking at the specs it would be equivalent to a DS-7604NI-E1. Anybody have experience doing this?
  14. L

    Hikvision OEM NVR - Flashing firmware experiment

    I have a Hikvision OEM NVR. WH-N5204-P4 running firmware 3.3.1 Trying to Google it shows nothing about the unit or any firmwares available. I am guessing it is a Brovision unit according to a few hits on the search engine but the Brovision website doesn't work anymore. Well... Found out the...
  15. L

    Upgraded firmware to 5.5.0 - ONVIF stopped working

    Firmware 5.5.0 and below have ONVIF enabled by default. 5.5.0 and over will have the ONVIF section. If it is not working then you may try defaulting the camera and trying again. I have never had an issue with ONVIF after upgrading from older firmware.
  16. L

    Alternative way of recovering HikVision NVR password

    Most of the dome cameras have a reset button inside. Just take off the dome and it should be on the mainboard of the camera. It is just a simple momentary switch. Once you find it then do the 30-30-30 method. First 30 sec just be pushing down the button Second 30 sec - Unplug the power while...
  17. L

    Hikvision DS-7716NI-SP/16 email

    Go log into Google and go to "Security" and enable where it says "Allow Less Secure Apps".
  18. L

    1st Coyote Sighting

    Wow.... Foxes have blue eyes? I never knew that.
  19. L

    Error changing camera resolution

    The recorder (NVR) has a limited amount of power for decoding the video to display on the local monitor. So if you try to view too many high resolution streams at the same time then it will give you the no resources error for any camera over what the unit can decode. Do keep in mind that it is...
  20. L

    Hikvision firmware advise please

    I was talking about Hikvision products in general. You cannot take a firmware for one region and install it on a device for another region. It will give you an error when you try to do it.
View older results
Top Bottom