Search results

  1. trempa92

    How to stop and start Live and recording using IVMS remotely?

    This sounds really suspicious. This might be used for unethical purposes. Hence i hope this kind of information wont be shared on public forums.
  2. trempa92

    Get passed license plate numbers using ISAPI

    You have 2 additional zeros which arent needed. hhmmss thats 6 digit for time. you have 8
  3. trempa92

    Remove license plate from allow list using ISAPI

    Just PUT on /ISAPI/Traffic/channels/1/DelLicensePlateAuditData?format=json as you can see you just send id which will be deleted
  4. trempa92

    How to open control barrier using Hikvision Camera?

    Few posts above
  5. trempa92

    how download firmwire hiknision

    setenv ';set ipaddr 192.0.0.64' setenv ';set serverip 192.0.0.128' setenv ';update' OR setenv ';ipaddr 192.0.0.64' setenv ';serverip 192.0.0.128' setenv ';update'
  6. trempa92

    How to open control barrier using Hikvision Camera?

    I would presume you need to maintain connection rather than using a classical GET. Havent really worked with alrertStream as i preffer AlarmServer/HTtpListener OR some other client is using that node already and cant push to both clients in same time
  7. trempa92

    How to open control barrier using Hikvision Camera?

    Well you need to decide, will you go with HTTP Listener or alertStream, data is same. I preffer HTTP Listener. Create TCP server to accept data Log in to camera and under alarm server or HTTP Listener (depends on firmware name can vary) insert ip address of your server. Camera will push events...
  8. trempa92

    How to open control barrier using Hikvision Camera?

    Are you trying to insert IP of your HTTP Listener server inside camera? If yes, then you need to use PUT not POST
  9. trempa92

    Hikvision night mode

    Perhaps the light sensor is covered in dust or by something else. Can you confirm the sensor which is usually clean?
  10. trempa92

    IP Cam: Indoor station vs hikconnect

    On Hik connect, you have option in settings to either show channels or hide them. You will see "eye" icon that you can press which will toggle visibility of channel
  11. trempa92

    Is Hikvision best for indoor, lowlight and no on-camera light?

    With IR you cant fail. But if you really want Color mode, and if ambient is really dark. Its hard to tell, either 2387G2-L with 1/1.2 sensor size or 2347G2H-LIU 1/1.8 sensor size. Both cameras work really good in low light condition. There is new ColorVu generation about to air, and i would...
  12. trempa92

    Hikvision DS-KD8003 PoE

    Depends on lentgh, if its within 30 meters, any would suffice
  13. trempa92

    Hikvision DS-KD8003 PoE

    you need 24 volts as the strike is PS - to 1 side of strike PS + to COM NO/NC to other side of strike. Depends if its normal open or normal close you will either use NO or NC
  14. trempa92

    Main Video Stream not working HiLook

    I believe hilook lacks virtual host option so continue with following: You could connect to poe port with laptop, set your network adapter ip adress to 192.168.254.50 open browser and write the ip of camera thatgot issues, enter your credentials. Then go to System -> maintenance -> Restore...
  15. trempa92

    TFTP updates firmware but doesn't reset password!!!

    Keep trying, its not one guy behind that email. You will get lucky
  16. trempa92

    TFTP updates firmware but doesn't reset password!!!

    You may contact Hikvision for password recovery, they tend to answer end users sometimes. If you are persistent they might do it.
  17. trempa92

    TFTP updates firmware but doesn't reset password!!!

    Unfortunatelly cant do it outside authorized installers we work with. There is log of resets that might be checked, wont risk it
  18. trempa92

    TFTP updates firmware but doesn't reset password!!!

    It was just presuming. I am a programmer hence i look for logical reasons why. If something worked with model 1 with Chip x, firmware x, doesn't needs to be same case on model 2 chip y, firmware y I did few factory restore that way and it worked when i didn't have other option. It was while...
  19. trempa92

    Hikvision PTRZ Dome Cameras

    Yes the 1000 cycle will lead to mechanical failure as i got the information. This is expected lifespan of either motor or rubber. Eitherway these are not meant to work as standard PTZ cameras, this options are presented only as installation time saving for image angle corrections. The hybrid...