Search results

  1. I

    What do most of you do for runs over 350 feet?

    Well, unless I can get power to the points I would need it, the only thing that will be able to run, will be cat6 cable. I won't know until the building is finished to know how the facility will look for sure and if he is even planning on running any type of electricity to any parts of it.
  2. I

    What do most of you do for runs over 350 feet?

    It may be that he can't run as long as he wants me to. This is in an outdoor metal building. It will be a storage facility for all of his large equipment. It is 3/4 covered. The front is open and exposed to the elements. The way it is setup it will be hard to add power to a lot of the places...
  3. I

    What do most of you do for runs over 350 feet?

    My friend wants to put a camera at the far end of his building and up at the top. The building is 20' high, and 320' from the source. The cable run will be around 360 when all things are said and done with the up and down walls etc. What would you do to make this work properly? I have run a lot...
  4. I

    Camera goes on/off on hot days.

    What is the distance of the run?
  5. I

    How do I setup motion detection on my PTZ5A4M-25X

    I've got to redo an older PTZ that I had to reset. It has been so long, that I'll have to try to remember how I did it over 2 years ago. My memory sucks. I'm sure it will be somewhat similar though.
  6. I

    How do I setup motion detection on my PTZ5A4M-25X

    Thank you so much. I hadn't found that video yet. I probably would have, but it may have been next week ;). I so do appreciate it. Have a great day.
  7. I

    How do I setup motion detection on my PTZ5A4M-25X

    Its the new gui.
  8. I

    How do I setup motion detection on my PTZ5A4M-25X

    I just got 2 new PTZ5A4M-25X , but I can't seem to figure out how to get them to detect motion and track. I will keep looking for the settings in the meantime and see what I find. Thanks.
  9. I

    SD5A425XA-HNR PTZ controls won't work.

    Well, I unplugged the power from the PTZ for a short time. I plugged it back in, and it now works again. Crazy. Well, it works. Now I need to start another post for a different PTZ I just got. Thanks for your help.
  10. I

    SD5A425XA-HNR PTZ controls won't work.

    I flashed firmware recently, but it was firmware directly from Andy for the PTZ version I gave him. I did 2 of them. One works, the other doesn't. Although, I flashed it a week ago, and it only quit working yesterday.
  11. I

    SD5A425XA-HNR PTZ controls won't work.

    The camera is 690 day(s) 7 hour(s) 30 minute(s) . It was not on a tour cycle. It should last longer than that I would hope. Maybe it is user error and I did something to a setting that I am not aware of. I can't find anything though.
  12. I

    SD5A425XA-HNR PTZ controls won't work.

    My SD5A425XA-HNR ptz controls just stopped working. I can't them to respond at all. No, zoom or pan or anything. What could have happened? Has anyone experienced this before? Thanks.
  13. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    Yes, it must be good. Or it better be good for that price. ;)
  14. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    Our setup has to be PoE. The run of cable is going to be around 125' or so. There are not a lot of options for more electricity and such, and it is already wired for PoE. I talked to Andy about that camera, and he says it is not PoE. I don't think there are any other options of a camera like...
  15. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    I suppose Andy may have it. I'll check.
  16. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    But, it doesn't look like is going to be easy to buy??? I can't seem to find who is selling it.
  17. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    That is exactly the camera that would work for another project that he wants. He has a leg on a bin that is 100' in the air. He wants to have a PTZ up on top that can scan 360 deg. I couldn't think of anything that would do what he wanted that would not have part of the view blocked, but if it...
  18. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    I'll check with him and see which one he wants. He may want some of the larger ones at his bin sites so he can see better at night and be able to zoom in better. He had some anhydrous stolen out of his tank out at his site. It won't stop people from doing it, but it may help in seeing who is out...
  19. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    Cost is not really going to be important. He can afford them, I just want to get the best bang for the buck for him as well. We need it to be a good heavy duty ptz, and be able to take a lot of wind etc. It will be up about 15' so I'm thinking more in the line of ones listed above, but I'll keep...
  20. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    I understand the size difference. I have a PTZ and have installed several others for other people. I have a friend that I put some cameras up for that is a quadriplegic. I installed cameras for him and several were PTZ. He likes to check on things, and found he really likes the PTZ cameras...
  21. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    Is the 2nd one you listed better, or just the same as the first ptz you listed? Quite a difference in price for sure. I guess when I mean better, I mean is it $1500 better in your opinion? I'll do some looking, but I don't know I could justify that price unless there was something special it...
  22. I

    PTZ cam with as good optics or better as IPC-T5442T-EZ.

    I am looking for a PTZ cam with as good or better optics as IPC-T5442T-EZ. What recommendations does anyone have for this? Thanks.
  23. I

    Camera just quit working.

    I have some Permatex around someplace.
  24. I

    Camera just quit working.

    Yep, pure copper. Yep, I'll waterproof them, thanks for reminding me. Does it have to be any specific dielectric grease?
  25. I

    Camera just quit working.

    No.
  26. I

    Camera just quit working.

    Well, we'll soon find out. I have some new Cat6 outdoor cable coming, plus a new PoE switch to power it all. I have used switches on all the other Ubiquiti NanoStations, and the switches work great, so I'll try this to see.
  27. I

    Camera just quit working.

    The connection below is in a watertight sealed box. No water can get in, or even dust doesn't get in. The one on top is in the compartment of the nanostation. The connection going into the camera is perfectly sealed also. I used the watertight connectors that came with the camera. I don't know...
  28. I

    Camera just quit working.

    If you didn't know what a leg was, here is a picture of the leg. All steel.
  29. I

    Camera just quit working.

    This cable is on a steel leg. I don't have any shielded cable, but it is a cat6 type. If lightning hits this leg, (it never has over a 10 year period) I don't think it matters that the cable is shielded or not, as everything will be toast anyway. It is not connected to any real important pieces...
  30. I

    Camera just quit working.

    The setup used is pretty much like this. Nanostation, down into a poe injector. But from there to power the cam, it goes into another injector out to the cam. I may add a switch in between though.
Top Bottom