Search results

  1. P

    Dahua nvr stopped recording and displaying camera survilance video(event video loss)

    Seems like the power supply for the analogue cameras, has most likely failed.
  2. P

    Nvr Dhaua IP Camera Problem

    The offered solution is hopefully good for your initial question. Your other question on your subsequent post is another matter.
  3. P

    Nvr Dhaua IP Camera Problem

    You need to provide a separate static IP address to each of the cameras, outside of the DHCP range provided by your Router. Also for the NVR.
  4. P

    NVR Showing on SADP but not Viewable through Browser or IVMS

    Are you able to probe the IP address and check for open ports, IE web port etc?
  5. P

    Firmware v 5.6.xxx for HikVision DS-2CD1143G0-I

    Basic search shows this https://www.hikvision.com/en/products/IP-Products/Network-Cameras/value-series/ds-2cd1143g0-i/
  6. P

    Firmware v 5.6.xxx for HikVision DS-2CD1143G0-I

    Silly question. I presume your extracting the zip file then just utilising the correct "bin" file for the update?
  7. P

    Dahua NVR2108-8P-4KS3 not working AI in NVR

    @GUTEK@ You stated "I get detection every time a car drives or a person walks down the street.". It seems you have achieved what you need. Well done.
  8. P

    Dahua NVR2108-8P-4KS3 not working AI in NVR

    Oh sorry. Only trying to assist.
  9. P

    Dahua NVR2108-8P-4KS3 not working AI in NVR

    On your 3rd picture it doesn't say "enabled".
  10. P

    No motion detection recorded only 24/7

    I've seen this before when a user deletes all the motion detection grids, then it doesn't record.
  11. P

    DAHUA IPC cameras web interface connection

    I would enable DHCP on each camera, so they will be allocated correct within the DHCP range of the router and correct gateway details. Once each camera is accessible, by all means change the IP to static or outside of DHCP range if required.
  12. P

    Resolve misted IP camera lens

    Can sell you my 6mp 4631, now the misted glass has been removed. Just stick a bit of sellotape over the lens for next Xmas.....
  13. P

    Resolve misted IP camera lens

    Such a difference in the amount of light to the lens and clarity by removing the glass cover. Okay to do on a internal camera. I'm sure the external glass or even plastic on some cameras can reduce the lens efficiency/clarity.
  14. P

    Resolve misted IP camera lens

    Decided to utilise a old 6MP Dahua 4631EM-ASE as a internal garage camera. Hadn't used it for some years. Even after 2 days it still misted up. I guess the unused period and condensation package as standard, was no longer beneficial. Heated lens glass and removed. All sorted! Please don't moan...
  15. P

    Tell me, Mr. Fox, how do you REALLY feel about Honda Generators?

    Typical Fox urinating on anything. This was a bowl of food left out for the Fox. So ungrateful!
  16. P

    B5442E-ZE video jumping back and forth.

    I've seen this problem your experiencing. When you have motion detection setup as well as IVS setup to be recorded. It seems to cause a clash with motion recordings. I'm guessing you don't have any other recording schedule setup as per the basic indication of the Smart PSS screenshot. Perhaps...
  17. P

    Can't edit active users in DAHUA XVRs- Please help!

    I think in the XVRs system UI under system- maintain/network/online user. You block a user. Perhaps this may assist or not.
  18. P

    Can't edit active users in DAHUA XVRs- Please help!

    Disconnect the ethernet network cable out of the XVRs.
  19. P

    How to access OSD Menu on Dahua DH-HAC-HDW1200EMP

    Oh sorry that didn't work. I know that some cameras in the past you had to use a preset 95 command via the PTZ controls, to access the OSD. Good luck.
  20. P

    How to access OSD Menu on Dahua DH-HAC-HDW1200EMP

    If you display 1 camera on the display. Then use the PTZ control and press iris +. It should bring up the camera menu.
  21. P

    Dahua 4MP IP Camera setting look poor

    Have you checked the NVR encode settings are exactly the same as the cameras encode settings?
  22. P

    I need to return my defender sentinel, need advice

    No reply from the OP, perhaps there out shopping!
  23. P

    Imou cameras showing TWO ip adresses on my network

    As bigredfish suggested. One is for Ethernet (even if not used) other is WiFi. I've seen this two IP address discovery on other cameras that work on Ethernet or WiFi.
  24. P

    Network cameras

    What's this a game of hide and seek?
  25. P

    Bicycle Stripping

    Isn't that the grass cutting caffeine addicted fast moving bloke?
  26. P

    Merry Christmas everyone!

    Tropical here at 12 degrees C in south UK. No snow. Happy Christmas to all. One sleep to go.
  27. P

    Sunrise on the farm

    Wow have you invented a chainsaw?
  28. P

    Dmss push notifications for IPC-T54IR-ZE-S3 without account?

    I understand that you don't need a account setting on DMSS but indeed you do need P2P active on camera or NVR
  29. P

    Smart PSS and Smart Search -- How to make it work?

    I understood that the Smart Search is just for standard motion detection. Within the defined area that you create. So just shows any motion detection within the frame you have created.
  30. P

    Dahua/Loryta Latency

    Use CBR (Constant Bit Rate) and increase bit rate to 6144 for starters.