Search results

  1. M

    Thermal bf1241

    I have a Dahua DHI-TPC-BF1241, hardware version S8, 10 mm lens, installed outdoors for perimeter detection with IVS. Model: DHI-TPC-BF1241 Hardware: S8 Thermal sensor: 256x192 Lens: 10 mm Algorithm Version: 2.0.6 Intelligent Version: V2.006.20230923 Firmware tested: V2.680.0000000.2.R...
    • michele5353
    • Thread
    • dahua thermal camera false alarms ivs thermal tpc-bf1241
    • Replies: 1
    • Forum: Dahua
  2. M

    Dahua IVS deep-learning NVR Wizmind

    Hello everyone. I currently have a dahua system with 24 cam (8mp wizsense) and an nvr5232-el wizsense. My goal is to be able to carry out a more high-performance AI analysis with IVS, so that I can integrate my cams into my anti-theft system (therefore use them as external detectors). I can't...
  3. M

    Dahua NVR with AXIS AI

    Hello everyone, I have a small doubt about nvr dahua (5232el) Using third-party cams (such as AXIS), will the information about the video analysis that the cam itself performs also be shared with the nvr? I ask because I would have the possibility of purchasing some thermal cams axis to...
  4. M

    Dahua IPC firmware

    Hi everyone. I have 2 dahua cams: 1)IPC-HFW5842H-ZHE 2)IPC-HFW7842H-Z. Both have firmware dated 2019 and I have some problems managing the IVS and video parameters with my nvr5232. I tried to download the firmware for these 2 cams from the Dahua website but upon installation it gives me the...
    • michele5353
    • Thread
    • dahua firmware firmware nvr update
    • Replies: 14
    • Forum: Dahua
  5. M

    VCA Hikvision on Dahua NVR5232-EI

    Hello everyone. I have a question to ask you: I have a NVR5232-EI with many dahua cams running "ai by camera" and 1 hikvision cam running "ai by recorder" with IVS. My NVR also has the ability to use face recognition/detection if the IVS of the relevant cam is disabled. Since my Hikvision cam...
    • michele5353
    • Thread
    • dahua hikvision ivs nvr-5232 vca
    • Replies: 1
    • Forum: Dahua
  6. M

    SmartPSS doesn't work on MacOS

    Hi everyone. There's no way I can get smartpss to work on macos SONOMA. When I start it gives me a warning that the Mac cannot scan for viruses, then it opens, I set the password and the related security questions and then it suddenly closes. Could any of you help me? Thank you!
    • michele5353
    • Thread
    • imac macos smartpss smartpss crash smartpss issues
    • Replies: 4
    • Forum: Dahua
  7. M

    Dahua NVR5232-El playback lagging

    Hi everyone. I have a nvr5232-el with 15 cams (4k and 4mp) and 2 hdd (3tb and 8tb 5400rpm) The playbacks seem very jerky and laggy, very often a few seconds are lost between an IVS event and normal recording. the same problem exists even if I play directly from the NVR (no smartpss or webgui) I...
  8. M

    Empiretech generic Firmware NVR5232-El problem

    Hi everyone, I would like to report a small problem on the generic empiretech firmware for nvr5232-el "V4.005.0000000.0.R.240514" I'm not sure if it's still a beta version firmware but as I was advised in another post "NVR5232-EL crash during playback" I updated it It works regularly but in the...
  9. M

    AcuPick, QuickPick, smart search doubts

    Hi everyone. I am new to the dahua world and I have some doubts regarding the use and functioning of acupick, quickpick and smart search. I have a nvr5232-el with IPC-HFW2841T-ZAS and IPC-HFW3841E-S-S2. I have the following questions: 1) does the acupick function work if supported by the cams or...
  10. M

    NVR5232-EL crash during playback

    Hi everyone, I have a 5232-el NVR with 15 cams connected (they all run AI by camera). Everything works, but when I playback from smartpss initially no problem, but after 5/10 minutes suddenly the system is unreachable both from smartpss and from the web page. In reality the NVR still remains...
  11. M

    GPU memory full with CPAI

    Hello everyone, in relation to my previous post about the CPAI problem with GPU I think I have found at least the cause. The dedicated GPU memory after some CPAI analyzes begins to "saturate" more and more and to go to the maximum without ever being reduced, it also begins to use traditional...
  12. M

    CodeProject server goes offline with GPU

    hi guys, i have a problem with codeproject and blueiris. I have gpu usage enabled, but every time CP analyzes something it goes offline and then restarts, but if gpu usage is disabled it works but often the alarm is cleared and it tells me "occupied". What do you think I'm doing wrong? My...
    • michele5353
    • Thread
    • codeproject
    • Replies: 0
    • Forum: AI
Top Bottom