Search results

  1. T

    HikVision NVR POE(Onboard) DS-7616NI-Q2 / 16P

    All I have plugged into my NVR's POE ports is one cable, the other end goes to a network switch, a TP-Link 8 +8 POE switch, so I don't understand why you have a problem, so I'm sorry you're having difficulties. What cameras are you using? I use several unmanaged network switches, I'm always...
  2. T

    HikVision NVR POE(Onboard) DS-7616NI-Q2 / 16P

    Part of my setup is similar, I have a DS-7000 series NVR using virtual host. On my linux PC I have VLC, on my desktop a VLC playlist picking up the rtsp streams of my 8 cameras (a mix of Hik and Dahua cameras) and a ninth for channel zero. The rtsp camera stream in the playlist need my NVR's...
  3. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Just to add some clarification, in Testing and Tuning CP AI didn't draw any box around the delivery driver, it did around his truck by the road and my parked vehicle in our drive. BI though did have him covered in small colored squares so appeared in the list of All clips. If I'd set the lowest...
  4. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    After dark this afternoon a delivery driver wearing a Hi Vis jacket with lots reflective strips showed up well under my cameras IR lights, as though we was wearing an illuminated jacket. He was missed by all cameras in CP AI but did trigger clips in all cameras in BI. Has the ipcam-dark model...
  5. T

    NVR with automatic PTZ control

    As part of my system I use a 8 ch (all POE enabled) Hikvision NVR with a single cable to a separate non-managed network switch, so the NVR doesn't provide POE to any camera, either my network switches do or my 3 cameras that have their separate power supplies. My rationale is that if things...
  6. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    CP in BI is here is mostly working well enough, my thanks to Mike and everyone else concerned. I think though I could do even better if I tweak a few settings. This evening a camera covering our back garden was triggered in BI by a passing fox, nothing though came through to my AI clips I'm on...
  7. T

    Problems upgrading firmware

    Then there's the current shortage of chips coming out of China, because of covid itself and their response with lock downs in their attempt to contain the outbreaks. It could be that they are using alternative chips in Chinese made cameras because all these shortages, and different chips can...
  8. T

    View Hikvision cameras without a browser plugin?

    Thanks for that info, I think for now I'll keep the cameras' firmware as it is. With previous versions of Pale Moon under Wine that I used, the Hikvision plugin was accepted. A while back I also had Ubuntu's Chrome displaying Live Views but I've several options including BI. I'll just add a note...
  9. T

    Daylight saving hour change, all OK for you?

    Here in the UK there was a 1 hour change overnight, this morning all my 4 Hikvision and 4 Dahua cameras were showing the correct time, in the UK that meant going from BST to GMT. (BST British Summer Time to GMT Greenwich Mean Time) It's now dark outside and what I've just noticed was that my...
  10. T

    View Hikvision cameras without a browser plugin?

    Thanks for responding to my enquiry, my Hikvision cameras in service are- DS-2CD2035FWD-I 3MP Hikvision G1 series fixed Bullet firmware V5.6.6 build 210625 DS-2CD2135FWD-I 3MP fixed Dome firmware V5.6.6 build 210625 DS-2CD2135FWD-I 3MP fixed Dome firmware V5.6.0 build 190507. PTZ...
  11. T

    View Hikvision cameras without a browser plugin?

    Whilst the firmware for my 4 Dahua cameras mean there is no need for me to install a browser plugin, my 4 Hikvison cameras still seem to need a plugin. Is this still the case in 2022? As someone who mostly uses PCs running Linux it would be an advantage not to need browser plugins.
  12. T

    Your Profiles, their Sync options for Trigger, Record and Alerts

    I just would like to know how others have set up their profiles with or without the Sync option in a camera's settings tabs for Trigger, Record and Alerts, mostly the latter two options here, because I have chosen the no Sync option selected in my profiles for Trigger in all my cameras. In BI I...
  13. T

    Upgraded firmware on a IPC-T5442T-ZE IP not responding

    Perhaps the one reason you might consider updating an older Dahua camera is that with newer Dahua firmware you can see video without needing a browser plugin. Of my 4 Dahua cameras on my Ubuntu desktop PC here I can see live views via my Hikvision NVR's Virtual Host feature. As I've reported...
  14. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Thanks but I have to be clear, a checked box means static objects are ignored, right?
  15. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Detect/ignore static objects, I just need to check this, I want my own vehicle parked on the driveway to be ignored and a new vehicle that is driven up to be detected, do I have the box ticked or left unchecked? CP AI is working probably now better here than I had DeepStack, and that includes...
  16. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Mike, in a camera's AI settings, what would be reasonable figures to choose for min confidence: real time images: analyze one each: I am pleased to read that dark mode will be extended to ip-combined. currently in my BI profiles I use ipcam-combined during the day, and ip-general for my night...
  17. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    In a camera's AI setting may have in the box, Mark as vehicle the entry car,truck,bus,vehicle. then in the box, To confirm the entry person,car In the camera AI settings you need to have something in the To confirm box like person,car
  18. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    spammenotinoz, you quoted an earlier post of mine, Code Project AI is now working with BI after using Mike's latest process.py file, and changing back to using port 5000, so here that's AI Server on 127.0.0.1 and port 5000 in BI Global Settings AI tab. I can well imaging there may be performance...
  19. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Code Project AI is working in Blue Iris, wonderful and thanks again for all your work Mike. I changed the port back to 5000 from 32168. The Dashboard shows I'm on GPU(CUDA) for Portrait Filter, Object Detection (YOLO), Scene Classification and Face Processing, whilst Background Remover is CPU...
  20. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    I'm busy with other things so just a short post to say THANKS to you Mike. Code Project AI is working when I open a browser. So it's working with my Quadro T600 GPU, using the test photos, squares are drawn around objects and display the confidence % levels. However it's not yet working with...
  21. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    Thanks Mike but here not really any progress. I'm on the same process.py file that you last posted. I changed the port to 32186 but still getting the same results, Detect Scene yes, otherwise no predictions otherwise, or "Nothing found" despite lots of green ticks in BI Status log AI.. Compared...
  22. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    I wasn't really expecting the replacement of process.py would get CP AI working here with my Quadro T600 GPU, as it seems to be with those having a GTX 16XX GPU, and this proved to be so. Apart from seeing a lot of "Nothing found" in the log files in BI Status, and in the logs in Program...
  23. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    I'm disappointed, I'm getting no better results with the new software, 1.6.Beta. BI Status log still shows lots of green ticks but "Nothing found". I'm on CUDA 11.7.1 + cuDNN v8.5.0, I've just updated the driver to 517.40 (dated 2022.9.20) for my Quadro T600 GPU, a Nvidia GPU in the RTX/Quadro...
  24. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    A quick update. I have a Quadro T600 GPU In the last few hours for reasons I cannot fully explain Code Project AI is delivering some sort of positive results, no longer does the Status log show white crosses in a red circle, now there are green ticks. My W10 reg has for several weeks had the mod...
  25. T

    Update to 5.6.0.10 here and BI doesn't start.

    I undated from 5.6.0.9 to 5.6.0.10 and BI didn't fire up, some error message about corrupt Program Files. This was about 2 hours ago. I first use W10 apt repair using the BI Wizard but it just stalled, I gave it over 30 minutes and nothing moved. I downloaded from IPCT here 5.6.0.9, ran it and...
  26. T

    Updating to latest BI 5.6.0.8 and I lose a week of clips and Alerts-SOLVED

    Thanks jrbeddow, I updated to 5.6.0.9 and recents clips and Alerts disappeared, but after a Database repair/regenerate as you suggested they reappeared. Your help is much appreciated, thanks.
  27. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    So if you have never installed DeepStack what then?
  28. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    MideLud1 why had you got deepstack appearing in your registry, is that the key to getting Code Project AI working with Blue Iris?
  29. T

    Updating to latest BI 5.6.0.8 and I lose a week of clips and Alerts-SOLVED

    I've been back on 5.5.9.6 (1st August 2022) for perhaps 2 weeks after a previous update messed with the "All Clips", as accessed from the green filing cabinet, it was all black blank. Still making no effective progress with Code Project AI to work, I decided to update BI to 5.6.0.8. With BI...
  30. T

    5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/

    The number of the Port 5000 is already included in it's own box to the right of the box entitled Use Ai Server on IP/port. If I add the port twice, as in 127.0.0.1:5000 and another 5000 in the port box no better results. I realized at the time that my post could lead to this mis-conclusion as...
Top Bottom