Search results

  1. pr1970

    latest 6.0.8.1 runs terribly slow on UI3 compared to 6.0.6.9

    Sorry i meant for the individual cameras not the global settings.
  2. pr1970

    latest 6.0.8.1 runs terribly slow on UI3 compared to 6.0.6.9

    Thats interesting , mine was up at 32 for 9 cameras. Where abouts is the individual setting for this? Thanks
  3. pr1970

    latest 6.0.8.1 runs terribly slow on UI3 compared to 6.0.6.9

    Yes its fixed in 6.0.8.4 :-)
  4. pr1970

    Web viewer scrubbing 480p vs 720p and above.

    Great thanks, seems all good in latest build. One question whilst its scrubbing and dropping down to lower resolution on all cameras displayed, the individual camera will stay at say 4k rather than dropping down to its sub stream, even though it has one recorded. Any ideas on that,
  5. pr1970

    Web viewer scrubbing 480p vs 720p and above.

    Anyone can help? thank you
  6. pr1970

    Web viewer scrubbing 480p vs 720p and above.

    Hi all Using the iPhone webview ui3 v5 and v6 I’ve always had an issue that 480p is great for scrubbing along the time line but 720p and above is just too slow to use. Any idea if this is normal? Just seems a significant slowdown in comparison. I’ve been using blue iris for a few years and it’s...
  7. pr1970

    latest 6.0.8.1 runs terribly slow on UI3 compared to 6.0.6.9

    Thanks yes can confirm 6.0.7.7 is ok from 12/6/26 but last weeks update kills the speed.
  8. pr1970

    latest 6.0.8.1 runs terribly slow on UI3 compared to 6.0.6.9

    Hi All had blue iris for a few years on my optiplex 7060 i5-8500T CPU @ 2.10GHz, 2112 Mhz + 16gb Ram , and now since the last update it the timeline view on UI3 via the browser is so slow its unusable. I've had to go back to 6.0.6.9 for it to run smoothly. Anyone had similar issues? Thanks alot
  9. pr1970

    capturing loud sound (car horn) to trigger event in BI

    Any other ideas?
  10. pr1970

    capturing loud sound (car horn) to trigger event in BI

    yes thanks have tried this but just not getting any activations, its reading the audio. but doesnt fire any alerts whatever i set the Hz/gain to .
  11. pr1970

    capturing loud sound (car horn) to trigger event in BI

    Hey all I have a couple of dahua cameras im trying to figure out how to get blue iris to create an alert if there is a car horn. I've setup the audio event as the screengrab below. It doesnt seem to be creating anything and ive tried a few settings for sensitivity and threshold, but nothing...
  12. pr1970

    Cant get 4k without dropping frames with IPC-Color4K-T-2.8mm .

    Thanks that seems to be working fine.:)
  13. pr1970

    Cant get 4k without dropping frames with IPC-Color4K-T-2.8mm .

    Thanks, thats helped being H264 but i put it upto about bitrate:15000 otherwise there would be streaks behind cars going across. One thing i've realised now is that the live stream on the camera in h264 is blurred at full screen but if you digital zoom its clearer, you dont get this in h265, its...
  14. pr1970

    Cant get 4k without dropping frames with IPC-Color4K-T-2.8mm .

    Hey all Ive had one of these cameras for a while but since hooking it upto blueiris have realised that alot of frames/recordings are getting lost, sometimes a few seconds of no data. I've tried reducing settings to 3072x2048 and that improves things but when 3840x2160 at anything about 12 fps...
  15. pr1970

    Why do Amazon delivery drivers lie?

    Hopefully before long with robotics and ai development we will have this chap delivering our mail to a safe place.
  16. pr1970

    Why do Amazon delivery drivers lie?

    Only Amazon or DPD seem to do this, drives me nuts. A few years back Amazon left some parcels, even though my instructions are to a neighbour or in a safe place (bin shed) but they just leave them on the doorstep. This caught the eye of a burglar who took it as nobody being home and jumped our...
  17. pr1970

    Patchy wifi on one camera

    Hi all I have an Imou system with a mix of wifi and poe cameras. first issue is a wifi that as you can see has spells of just losing connection. After this photo it was fine throughout the night. The mesh ap is about 5metres away but had a brick wall to the side of the camera to contend with...
  18. pr1970

    Image corruption with QVR Pro on 1 camera only.

    "Their next suggestion is to upgrade the firmware. When doing so there can be the risk of bricking the cam but IMO an image with that corruption is useless. Besides if it bricks, you've only lost a Reolink camera that you can replace with a Dahua or (Loryta or Amcrest, both OEM'd by Dahua) or...
  19. pr1970

    Image corruption with QVR Pro on 1 camera only.

    Thanks was trying all of that but I noticed that in QVR Pro camera settings it was using about 4Mbps , i reduced down to 2048 and 10 fps and now its better, still occasional corruption but less. If i went to a lower resolution that cured it. But rather have the resolution and the occasional glitch.
  20. pr1970

    Image corruption with QVR Pro on 1 camera only.

    Hey All I have 8 cameras connected to QVR Pro either WIFI or CAT 6/7 wired. All run fine apart from a Wired Reolink camera that I'm getting corrupted frames, just a small section. Heres a screen grab from the top of one frame. The image is fine on the cameras own settings page and also i...
  21. pr1970

    Initial review of the DS-2CD2347G2-L(U) ColorVu 2.0 IP camera.

    In the image menu there is a scene type pulldown menu for daylight , low light ,etc you can adjust them accordingly. Then the way I did it was to create a month schedule and change between daylight and then low light during ours of daylight and night.
  22. pr1970

    HikConnect only playsback video at certain times, bitrate related?

    Yes its definitely bitrate related, If i set the camera to record to sd using the substreams or lower mainstream bitrate it playsback fine. I`ve tried both ivms-4200 (windows) and the network camera direct ip and they playback fine at higher bitrate. Could it be that its just how the android...
  23. pr1970

    HikConnect only playsback video at certain times, bitrate related?

    I have it on both WiFi and Mobile 4g and its the same with both of them. thanks
  24. pr1970

    HikConnect only playsback video at certain times, bitrate related?

    Hi All Just setup a hikvision turret cam with hikconnect (android), and for some strange reason it seems to playback over the hours of darkness, during the day it pretty much wont playback. Think it could be bitrate related, i have it set to 3072 bitrate and if i lower it to about 1024 it seems...
  25. pr1970

    New to Hikvision have a few issues (connect app, motion detection)

    Thanks for the info. The synology surveillance station looks more involved than QVR on my QNAP. So is also that detection done in synology setup and not using the built in Hikvision motion detection?
  26. pr1970

    New to Hikvision have a few issues (connect app, motion detection)

    Thanks. The issue with Hik Connect is its using its own motion detection for alerts. If i disable it then i`m not getting any human alerts from the camera. I guess i could try clearing the motion detection area on the app and see if it still lets camera detection alerts come through.
  27. pr1970

    New to Hikvision have a few issues (connect app, motion detection)

    Hi All So i`ve recently purchased a DS-2CD2347G2 turrent cam, i had a dahua turret previously. I absolutely love the new camera, software,etc it feels very fast and quality is great but i have a few issues that i cant find the answers for,I spent about 3 hours setting it up yesterday. So if...
  28. pr1970

    Initial review of the DS-2CD2347G2-L(U) ColorVu 2.0 IP camera.

    You need the DS-2CD2346G2-ISU/SL version of the camera. Be careful of other versions its the ISU/SL for warning light and voice.
  29. pr1970

    Nest doorbell software equivalent for ip cam

    ok will give it a go, but will it be any better than a Nas drive with survellience station? maybe I'll try reducing the recording bandwidth and see if that helps.
  30. pr1970

    Nest doorbell software equivalent for ip cam

    I do have a qnap Nas that records footage but again it's nowhere near as fast or has the convenience of using nest cloud storage.
Top Bottom