Search results

  1. Gadget -X

    Dahua IPC-HDW5231R-ZE INOP

    Thank you. That sounds like a plan. I was wondering why he has not responded to shipping me out the 2 spares I wanted to order. M
  2. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    I have 2 POE switches. One is 84W and one is 124W. My power budget for HDW5231R-ZE 10W max each. The reason I purchased the Cisco SG300-10MP was that I ended up installing 8 HDW5231R-ZEs & 1 HDW5631R-ZE. Power was over 100% of budget. I now left both switches in system and have split the...
  3. Gadget -X

    Dahua IPC-HDW5231R-ZE INOP

    One of my Dahua IPC-HDW5231R-ZE is INOP. It is only 10 months old and was purchased from Empire Tech. No response from hard reset. I took the 128GB stick out of it. My question is it worth anything for parts or should I just toss it. Thank You M
  4. Gadget -X

    Review-Dahua DB-11 Video Door Bell

    Same exact chime. Make sure you do not have a diode inline some where... I will retrace the wiring when I get back home. M
  5. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    I will do that next time. I have a 12v 1.5a Power Supply I can try. You are thinking it is POE power related? Don't have any cameras with issues at the moment, only the bricked one. It is a mystery to me how reseting to factory default and restoring the config file would fix the camera with...
  6. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    TY Fenderman. I did exactly that last night. Camera with issue all by itself and the issue was still there. The good news is when I did a hard reset to factory default and import the configuration file, the camera has not gone off line yet. fingers crossed. The bad news is when I tried this...
  7. Gadget -X

    Review-Dahua DB-11 Video Door Bell

    I got ours to work. I wired as shown. And installed the IMOU App. Selected chime as electronic > ring setup > A. It did not work until I set it up in IMOU App. M
  8. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    Thanks for the reply. I tried that also. Put a 2nd POE switch in with half of cameras same result... M
  9. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    Ok tried factory reset and still goes offline every 65 secs. I even left it at the default 192.168.1.108 IP and it still did it. Going to order a few more cameras. All my cameras are running the same version of firmware, all hooked to the same POE Cisco switch, but 4 some reason some fails...
  10. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    I was searching for the factory reset thread... M
  11. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    So I replace camera all is working fine. So I noticed today another camera is now going off line every 65 secs. I tried everything including put the back up POE Cisco switch in and still the one camera goes offline every 65 secs. The replaced and all other 7 cams are working without issue...
  12. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    I now have verified that it goes off line every 65 secs. I am assuming bad camera hardware. M
  13. Gadget -X

    Issue with IPC-HDW5231R-ZE camera

    Well I am having my 1st major issue with my 9 HDW5231R-ZR cameras. I have one camera that all of the sudden it goes offline every couple minutes for 60 secs or so then comes back on. This has been verified on NVR, Computer and with ConfigTool. I have rebooted, I have switched ports on the POE...
  14. Gadget -X

    Review-Dahua DB-11 Video Door Bell

    DB11 is 5"x2". Ring is 6.2"x2.6" Not sure why you need a wedge kit. Angle does not appear to be all that bad. That link shows a wedge that goes from 30-55 deg. You can make a simple wedge from thick sheet metal. I have a piece of stainless I plan on making a slight wedge from. M
  15. Gadget -X

    Review-Dahua DB-11 Video Door Bell

    My serial number did not match either. Not hard to navigate by. As far as video, how far is the DB11 from the wireless router. If you set the video same as my examples you should have a better picture as long as you have good signal. If not a simple wireless extender on the nearest power...
  16. Gadget -X

    Review-Dahua DB-11 Video Door Bell

    What are you trying to adjust? This is all I could find. I had to use ConfigTool. M
  17. Gadget -X

    Firmware issue with IPC-HDW5xR-ZE ??

    does smartpss tell you the version of firmware? M
  18. Gadget -X

    Firmware issue with IPC-HDW5xR-ZE ??

    Yes sir all set to NTSC. Thank you
  19. Gadget -X

    Firmware issue with IPC-HDW5xR-ZE ??

    Looks like a windows exe. As I said on iMac MacOS Mojave. M
  20. Gadget -X

    Firmware issue with IPC-HDW5xR-ZE ??

    I apologize. I am running ConfigTool 4.01.0 on my iMac Pro. Is there a later version? M
  21. Gadget -X

    Firmware issue with IPC-HDW5xR-ZE ??

    Mornin' Members: I was wondering if someone could shed light on what is up with my Dahua cameras. I have 2.622.0000000.23.R, Build Date: 2018-03-30 on nine IPC-HDW5x31R-ZE cameras. I was wondering why some report Type "IPC" and some report "IPC-HDW5231R-ZE".(1st Photo) The ones which report...
  22. Gadget -X

    Dahua DB11 install question

    Well that is what I get for reading the manual. The manual says by default the name is the Serial Number. I found 3 drivers that work (see photo). I am impressed with the IR of the small wireless DB11 in total dark. (See photo) I noticed a member built an angling bracket for their doorbell...
  23. Gadget -X

    Dahua DB11 install question

    Great what is the user name? M
  24. Gadget -X

    Dahua DB11 install question

    Settings?
  25. Gadget -X

    Dahua DB11 install question

    Does anyone have the setting for the DB 11? It does not show up as ONVIF. I know it's IP address and password but I can't access the video stream at all. Help Please. M
  26. Gadget -X

    Dahua DB11 install question

    My NVR does not find the DB11. It is ONVIF right?
  27. Gadget -X

    Dahua DB11 install question

    Thank you for the reply. I have a Generic NVR. It works great with the other 9 HDW5xxx cameras. All I do is set the NVR to the IP addressed assigned by router enter the username / password for the cameras on the NVR. I am guessing the DB11 does not have a configuration page like the other...
  28. Gadget -X

    Dahua DB11 install question

    Would anyone happen to know if the DB11 has a web configuration? I cannot find a video feed for our NVR to record. Suggestions? Thank you M
  29. Gadget -X

    Dahua DB11 install question

    32 Years USAF. No flag issues :-) Now if I can only fix the furling... M
  30. Gadget -X

    Dahua DB11 install question

    I rebooted the iPhone and re-installed from scratch and it is now working. Can't seem to find a way to shut off the actual DB11's doorbell sound which is lame. Here is a photo snagged from a short video. I will play with quality some hopefully. Also the doorbell does not connect to wireless...
Top Bottom