Search results
-
SD6AL433XA-HNR Laser PTZ Tracking Issue
BigRedFish: I hope your Mom is doing better and if it's not raining I will get some video tonight. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
UPDATE: I installed the second 433XA PTZ and noticed how much clearer the picture was than the first one I installed several weeks back. So I decided to climb the tower with some cleaner and clean the lens on the first camera (the pictures above are from the first camera). I cleaned the lens... -
-
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Interesting, I plugged the Access Point back into the NVR after hooking the LAN connection from the PoE injector for the Nano into my router so I could get the screenshot above from the Nano and now the NVR has the camera offline. I'll go down and cycle the power to the PTZ and see if it comes... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Redfive: This is the access point above with the antenna mounted inside looking through a window. The station is 600 feet away and 40 feet lower in elevation. When I tried lowering my channel width at the access point to 10MHz it lost connection with the station. Any thoughts? -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR: Unbelievable knowledge I picked up from you guys, it really helped me begin to understand networking, wifi, routers, etc which I am fascinated with. I really wanted to learn each aspect of it and gain some understanding of how it works, so no, if I had to do it over again I would have... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
I power cycled the PTZ and came back to the residence and the NVR sees it now and everything is working perfectly! THANK YOU Catcamstar, TonyR, Redfive, Flinstone61, Wildcat_1, Jessie_Slimer, you made my month and a long month it has been on this end. Great job, I really appreciate it, and... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Catcamstar: Yes sir, Port 10 on the NVR is plugged into the LAN port of the Ubiquiti PoE injector. I have put no static IP address in the camera and I will go down there now and power cycle the camera and reply back. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR: I went down to the Station/Bridge, connected my laptop and tried to access the internet, no joy. I then logged into the Nano and found the WDS not enabled. I enabled WDS and then tried the internet again and it connected no problem. I hooked the PTZ back up to the PFA1200 and the... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR, for some reason I didn't see your post earlier, the answer is no, I do not know what I'm doing in setting up this bridge, any help would be greatly appreciated, and thank you for your response. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Redfive & Flintstone61: Thank you for your replies, I have the Nano's paired and installed. I'm using WPA2-AES for security, I have the SSID and password working and I made their IP static and changed it to one that would not cause a conflict. The problem I have is my NVR (NVR5216-16P-I) does... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Thank you Jessie. I'm still wondering how to manage the wiring once inside at the residence where the NVR is located, do I use Option 1 or Option 2? PS: I took the other 2 options off the original post since receiving your post Jessie since they are not applicable. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
This afternoon if all works out and I make it home, I will have the pleasure of hooking up my PTZ with your help. My question revolves around setting up the Nanostation as described in the title of this post. The below is a drawing of what I think would be correct for the "Client" located at... -
-
Andy - Empire Tech Review
I was lucky and found IPCamTalk and was able to spend the time to read and learn. One of the first things I learned was Andy is the guy that could hook you up on the latest technology quickly and affordably. The dilemma I now faced was what cameras and NVR would be used for the unusual... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Wittaj: You fixed it, changed "Type" to "Remote" instead of "Local" and it works PERFECT!!!!! Thank you Wittaj, BigRedFish, and Ljw2k for all your help, you guys were patient and willing to invest your time and share your experience to help and I do appreciate it. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Wittaj, I think your on to something, only from the Camera Web GUI can I operate the PTZ and I notice in the NVR there are the below settings that may be the issue but I'm not sure what to do, meaning I think this is the reason the PTZ is not identified by the NVR. Not sure what Protocol to... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Just checked both Camera 15 and Camera 9 schedules, both are set for 24 hours. Also tried a reboot (power off the DVR for 60 seconds), and tried to get it to trigger but it didn't. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
As you can see below in picture 1, Camera 15 is in the office as my test camera and I am using the Camera's AI. In picture #2 the PTZ is Camera 9 and the PTZ Linkage is set to Camera 9 going to Preset 1 (the field). In picture 3 the PTZ linkage is enabled. I'm not sure what I'm missing unless... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Wittaj, thank you for your patience and help, the trigger issue has been a hard one to figure out. The PTZ is connected to the NVR through a High PoE Midspan Model PFT1200 I got from Andy using Cat 6 direct burial cable. I do watch the live version of the PTZ through the NVR and it shows the... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
BigRedFish: I did get my Time Task saved to go to Preset 3 (pool) after 160 seconds but when using my office test camera to try and trigger the PTZ to go to Preset 1, I get no response from the PTZ. I have also tried using my outside mounted cameras but get the same results. I did disable my... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
The Illuminator setting on the last picture is below: -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Forgot to mention, the young lady above at 20:49 local time that got cold while I was adjusting the camera settings is being auto-tracked at 100+ feet away. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
600 feet away from camera, no man made lights within a mile, raining, heavy cloud cover, see below for settings. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
The below was tracking perfect, my participant got cold and needed a break so I could not take the shutter speed faster but it is working much better at night with tracking. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Mr. BigRedFish, or others who may know: My Spotter Cameras are still not triggering the PTZ with your settings, I wonder if its something in alarms or something else I'm missing. All I am using is IVS rules in the camera and the only NVR AI I'm using is what is listed below for triggering the... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Wittaj, I didn't take the time last night to dial it in, got started late, and was falling asleep. I will be back at it tonight since I do not have to work on Saturday and hopefully, the rain will stop this evening -
SD6AL433XA-HNR Laser PTZ Tracking Issue
The second picture using SmartIR is the following: The first picture with the Laser is the following: -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Yes, she's not happy and seems to be complaining but "Dainty" is a trooper, even in the rain at 600 feet from someone who would pour her a touch of a decent refreshment. The first one below is with the Laser and the second one without the Laser. This is without the Laser and only Smart IR... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Great news, for tonight's testing of the PTZ I found a retired clothing model who is now a high-end stripper that's willing to do me a favor and trade her time for all the Crown Royal whiskey she can drink while on the property. She came up early today (see photos below) to head out in the...