Search results

  1. L

    Add Sunrise Sunset to Time Plan Settings

    Yep - for years it was hammered into me that if a service isn't required it shouldn't be running so when I first set up my cams years ago and until now I had no need for the cgi service and most of the others that are available so I disabled them. I was also using port forwarding until about a...
  2. L

    Add Sunrise Sunset to Time Plan Settings

    BLUF: Figured it out. Didn't have the cgi service running. Yep. That simple. As a retired sysadmin / network admin I decided the best way to retain my sanity was to drag out an old POE dumb switch and setup a little test network where I could modify my spare empiretech cams at will using an...
  3. L

    Add Sunrise Sunset to Time Plan Settings

    Yep - the username/password has been validated, the port 80 thing eliminated, tried the command (actually many versions of that api call/command) in the action set window - same 404 error. The camera was just reset last month as the IVS rules had stopped working. I factory reset the cam...
  4. L

    Add Sunrise Sunset to Time Plan Settings

    It was many years ago I had something that required me to change the default port of my old cam for a reason I no longer remember - It became a habit continued to this day. Here is the find/inspect. Setting the cam back to port 80 made no difference so I put it back to what I'm using for now...
  5. L

    Add Sunrise Sunset to Time Plan Settings

    Running that command in the browser gives me the same 404 error. Yep - http. I think I'm going to set the cam back to port 80 and see if that makes any difference. I've validated the user name and password also.
  6. L

    Add Sunrise Sunset to Time Plan Settings

    This camera is running empire tech firmware from 2025 and I've never seen the orange GUI even when I first received the cam. I'm using the exact API call as shown in this post above. The only difference is I'm not using port 80 so I have to add in the port number to the IP address. If I remove...
  7. L

    Add Sunrise Sunset to Time Plan Settings

    I've been attempting to implement the day/night switch via Blue Iris 5.9 on my T54IR-ZE-S3 running Web Version V5.01.0.2308726 but haven't gotten past this error "Web: No stream: 404." I'm using the api calls listed in this post...
  8. L

    Dahua / Empiretech IVS feed with Blue Iris - missing ONVIF source data field

    Sending in ticket now. Follow-up answer from Ken at Blue Iris: For version .88, if the camera does not send "VideoSourceConfig" I will simply copy "VideoSource" to "VideoSrouceConfig" Thanks Ken
  9. L

    Dahua / Empiretech IVS feed with Blue Iris - missing ONVIF source data field

    Just purchased a new IPC-T54IR-AS-3.6mm-S3, FirmwareVersion: 3.142.15OG001.0.R, and had to do the same thing with 00000 manually added to the second box or ONVIF events will not report into Blue Iris, version 5.9.9.85. Upgraded an older IPC-T2431T-AS-3.6mm-S2 to new FirmwareVersion...
  10. L

    Need help setting up a new Empire Tech camera

    Thanks for that!
  11. L

    Need help setting up a new Empire Tech camera

    I've just started migrating from Foscam cameras to EmpireTech cameras. It took me a bit to do the first cam but I've got two up and running now on a test bench. Once winter's done I'll be mounting them outside and connecting them to BlueIris. I've read the cliff notes but there's a lot of...
  12. L

    Need help setting up a new Empire Tech camera

    Thanks for that - in all the threads I've read here I can't recall any of them explaining that the config tool isn't necessary for this. I'll give it a shot on my next camera.
  13. L

    Need help setting up a new Empire Tech camera

    Is there any way to do the "initialize" without the config tool? I never tried to use a browser for this.
  14. L

    Foscam R2C - Current Tool does not seem to be the latest.

    Has anyone else gotten this while attempting to do the initial logon after doing a factory reset? And how did you get past it? I've disabled my firewall and used many different browsers but nothing I do will let this app fill in the default password, whatever Foscam may have changed it too...
Top Bottom