Search results

  1. KimS

    Hacked DAHUA cam and added that names

    The NVR I am talking about had and have the V4.002.0000000.3.R from 29.07.2024 which is the newest from Dahuasecurity.com so this is a bit of a concern. I am only guessing if hacking thru P2P then there would be millions of cameras up for grabbing globally.
  2. KimS

    Hacked DAHUA cam and added that names

    https://github.com/bp2008/DahuaLoginBypass
  3. KimS

    Hacked DAHUA cam and added that names

    I asked Gemini to create a report about his and here is what Gemini said: Report: Analysis of Unauthorized User Creation on Dahua NVR and IP Cameras 1. Executive Summary 1.1 Background This report has been prepared in response to an inquiry regarding a security incident where new, unauthorized...
  4. KimS

    Hacked DAHUA cam and added that names

    What is a bit strange is that this system have been running on a 2021 firmware for a long time and I updated the firmware about 4/5 weeks ago to the 27-09-2024 firmware, it is a NVR608 and at the time of upgrading there where no such added external users, and they wasn't there 6th of September...
  5. KimS

    Hacked DAHUA cam and added that names

    The router is under control of a larger it company, and there could be, but not up against the nvr
  6. KimS

    Hacked DAHUA cam and added that names

    P2P UPNP deactivated, onvif deactivated. Two things activated P2P and CGI.
  7. KimS

    Hacked DAHUA cam and added that names

    Just found out that I been hacked some time in the last two weeks, I added a image of names that are added to the NVR. The firmware used in the NVR is from end of September 2024
  8. KimS

    Firmware for SD8A840-HNF-PA (Dahua)

    What about this firmware? https://www.dahuasecurity.com/products/All-Products/PTZ-Cameras/WizMind-Series/SD8A8C/8MP/SD8A840-HNF-PA
  9. KimS

    Firmware for SD8A840-HNF-PA (Dahua)

    2.810.0000014.2.R,2021-07-09 DH-SD8A840WA-HNF I am running that software. I don't have the firmware with me. But will see to upload it when I am back. I have updated that camera at some point so I guess I have it. But where?
  10. KimS

    Dahua httpget command for NVR5216-8P-I and ARB1606

    Whwre can I download the 3.26 APR from?
  11. KimS

    Dahua httpget command for NVR5216-8P-I and ARB1606

    I have gotten reply from Dahua that ARB1606 does not support HTTPget commands, only NVR/IPC etc. So one have to do a signal to the ARB or a 3rd party solution.
  12. KimS

    Dahua httpget command for NVR5216-8P-I and ARB1606

    I have an NVR5216-8P-I with ltest firmware and an ARB1606. To trigger alarm in channel I use httpget command like this: http://username:[email protected]/cgi-bin/configManager.cgi?action=setConfig&Alarm[0].Enable=true. But my problem is that it only works on the alarm ports on the NVR itself...
Top Bottom