Search results

  1. Sim24

    IP conflict after power cut

    @Flinktstone61. Thank you. that is what I tired. hardwired a computer to the NVR (rj45) but what do you mean by logging into the NVR. I can log into NVR but how will I use the utility in this case
  2. Sim24

    IP conflict after power cut

    Thank you for your responses, seems like we are back up and running on all. This is what worked out in the end 1) Removed all cameras from NVR which were NOT working 2) Attached these one at a time to NVR and did a hard reset on each camera and did a full shutdown and reboot of NVR This resolved...
  3. Sim24

    IP conflict after power cut

    I have around 7 camera in the system and things had been working great for last three years. Had a power cut recently (which is rare in my area), although the NVR is on a UPS but it ran out of battery before the supply was restored. After the power was restored only 3 out of 7 cameras came back...
  4. Sim24

    Motion detection not working - New set up - Dahua NVR5232

    Oh wow! thanks, that worked. Never looked into this setting. seems like there are multiple places where settings need to be updated. just tried it and one of the cameras picked up motion as expected.
  5. Sim24

    Motion detection not working - New set up - Dahua NVR5232

    I am new to this forum and been reading about NVR/security solutions for last few weeks. We are building a new home and I decided to (after reading posts here) go with Dahua based system. I bought Empiretec NVR5232 (thanks Andy) and Empiretech 4k-x 8Mp and Loryata T5442 cameras to get started...
    • Sim24
    • Thread
    • 4k-x 5442tm-as dahua 5232
    • Replies: 3
    • Forum: IP Cameras
Top Bottom