Spooling's latest activity
-
SSpooling replied to the thread AI analysis not stopping when target if’s.Thank you, I'll check it out. Need to read the documentation! It's interesting that you need to specify it to stop analyzing if...
-
SSpooling reacted to killerdan56's post in the thread AI analysis not stopping when target if’s with
Like.
theres a person:0 you can use in the confirm box to make it stop analyzing once it detects the object. Look up the help file in blue iris -
SI’m using CPAI to identify people. I have the AI configured so that it does up to 15 analysis at 500ms intervals when triggered. I’ve...
-
SSpooling replied to the thread AI detecting people vs dogs/foxes.WOW! That's incredible!
-
SSpooling replied to the thread AI detecting people vs dogs/foxes.Thanks for your sharing your experience. On these problematic cameras, i have it set to filter and look for people only. I'm surprised...
-
SSpooling replied to the thread AI detecting people vs dogs/foxes.Yes, I always leave the min/max size alone, unless there's a specific issue. I'll see if I can tune the cam settings a bit as well.
-
SSpooling replied to the thread AI detecting people vs dogs/foxes.I've dialed the cameras settings in somewhat. I'm running a manual shutter and capping the duration of the shutter. For IVS, I've never...
-
SSpooling replied to the thread AI detecting people vs dogs/foxes.Here are a couple of examples. Our dog on the deck triggers as a person close to 100%
-
-
SSpooling replied to the thread IVS on 5442.So to wrap this up; I ended up using trip wires for one area and an intrusion zone for the other and was able to achieve what i wanted...
-
SHey there; I've been working on dialing in my system for awhile now and the one issue I have currently is trying to get AI to...
-
SGo back to the camera setting in BI and hit the find/inspect key again and post what the pop up window shows. It might give us a clue...
-
SOK so you are using BI. Under the ONVIF Triggers comes up all of the camera events it listens to. Each one corresponds to something in...
-
SI've learned to kill motion detection on the camera by clearing the detection zones, setting sensitivity to zero, threshold to max, and...
-
SThat bottom right camera likely won't trigger. The IVS lines are vertical rather than horizontal. You need to pay careful attention to...
-
SSpooling replied to the thread IVS on 5442.It's interesting. Every time I run a find/inspect on the camera, whatever BI does, it ends up enabling the motion and tampering feature...
-
SSpooling replied to the thread IVS on 5442.OK! Here's what it spits out.... Opening 192.168.1.108 port 80... HTTP Get / request... OK ONVIF GetSystemDateAndTime...
-
SSpooling replied to the thread IVS on 5442.Thanks Wittaj. I totally get all that and appreciate you writing all of that. In my case however, the camera spits out Rule="000" for...
-
SSpooling replied to the thread IVS on 5442.For the last .xml data that I posted above these are my settings on the camera. The tripwire has a name and the 2 intrusion zones have...
-
-
SSpooling replied to the thread IVS on 5442.I want to have 2 different intrusion zones ideally. I just added the trip wire for testing. With 2 different intrusion zones, I can't...
