Recent content by SparrowG
-
S
PTZ4K-25X-PV reboot/crashing with IVS
Well, at first i had the camera running of a Unifi 802.3af injector that only supplied 15w... then i got the 30watt model which is a 802.3at but just at 48 volt. So by the specs at the camera that say 802.3at that 30w unifi should work theoretically on paper. And the camera doesn't reboot as... -
S
PTZ4K-25X-PV reboot/crashing with IVS
After a bit of research it seems like the Unifi injector is a PoE 802.3at type 1 since it only have 48 volt out. And the camera needs PoE+ 802.3at type 2 which is 50-57 volt range. I'm correct? -
S
Anyone has success running Frigate in Home Assistant?
Yes i run Frigate on HAOS, but don't run it on a Pi, Frigate needs alot of CPU power and a Coral :) -
S
PTZ4K-25X-PV reboot/crashing with IVS
Now when the camera is installed at its correct location i get reboot problems even with my new PoE+ injector. I got about 25meters (82 foot) of cable (23 awg solid bare copper) cable link The camera spec say 12 VDC, 3 A ± 10%; PoE+ (802.3at) which is 36w at 12 volt. And if i look at the... -
S
PTZ4K-25X-PV reboot/crashing with IVS
So far so good, no resets since i changed to a PoE+ injector -
S
PTZ4K-25X-PV reboot/crashing with IVS
Ok! I have nothing to lose to try it out since i don't have any specific settings stored yet -
S
PTZ4K-25X-PV reboot/crashing with IVS
Today i got myself a PoE+ injector for the camera so now time will tell if this solves my problem :) I have not Factory reset the camera, the GUI looks pretty new to me and i also did a firmware upgrade yesterday. Thanks for reply, bought a PoE+ injector today before i upgrade my switch to a... -
S
PTZ4K-25X-PV reboot/crashing with IVS
Hi I recently got my first PTZ camera from Empiretech and the model is ptz4k-25x-pv. My problem is that when i have the AI tracking function on ( IVS ) the camera randomly crashes/reboots for some reason, atleast 2-3 times aday. It feels like when something fast is moving and the camera tries...