Recent content by perfect777

  1. P

    Recommend me a camera that can zoom

    I see! What specific camera is this?
  2. P

    Recommend me a camera that can zoom

    Sorry - not sure that I follow?
  3. P

    Recommend me a camera that can zoom

    School has started and the district has moved the bus stop from directly in front of my house to about 100-150 yards away. I have a camera (Loryta IPC-T541IR-AS 6MM) aimed in that direction, but my kids are just a few pixels and my wife has given me the green light to get a better camera to...
  4. P

    Blue Iris no longer respecting storage limits

    I have 850GB free on my main C drive - but I'm only allocating 500GB for the "New" storage. I don't think it's a case of running out of storage BEFORE maintenance has time to perform the deletes (unless this is a very slow process that takes days to initiate). I could move it all to the 3TB...
  5. P

    Blue Iris no longer respecting storage limits

    I've been running Blue Iris v5.6.8.1 since July 2023. I have about 25 cameras and they record to different locations. "New" clips are stored on a 1TB local drive (C) and is set to limit size to 500GB. Once that 500GB limit is met, the clips should be moved to the "Stored" location (a 3TB...
  6. P

    Area of Interest (AoI) Greyed Out

    Thanks for the advice. Edit: it appears that this is a result of "dual streaming". I was able to disable the sub stream (which enabled the AoI)... but the AoI is removed/greyed out the moment that I re-enable the sub-stream...
  7. P

    Area of Interest (AoI) Greyed Out

    Hello! I'm trying to edit the Area of Interest on one of my cameras. I'm trying to avoid facing a partial wall and a neighbor's window. I've used AoI on other cameras, but the option seems to be greyed out (even for an existing camera where AoI is set and working - I can no longer edit...
  8. P

    Help with Drive Overallocation

    I already changed it (per your recommendation) - but it was wayyy more than 100MB!! I think it was a few hundred GB!
  9. P

    Help with Drive Overallocation

    Good call! I just went and changed this. Never considered how this works before...
  10. P

    Having issues with Amcrest IP3M-941 Wireless (Blue Iris Main Stream = 0.00 FPS)

    Hey - this (mostly) worked!! I'm not getting an FPS (and the 1080p MP appears to be working!) I did have to remove the "&proto=Onvif" code in the stream profile for it actually connect:
  11. P

    Having issues with Amcrest IP3M-941 Wireless (Blue Iris Main Stream = 0.00 FPS)

    I tried both of those Make/Model profiles and neither fixed the Main FPS issue...
  12. P

    Having issues with Amcrest IP3M-941 Wireless (Blue Iris Main Stream = 0.00 FPS)

    I don't recall ever rotating or changing the camera in the GUI (how can I tell?) I bumped up the buffer to 40MB. I'm not 100% sure what you meant by the "blank box". I was able to change the resolution to 1080p in the Amcrest settings, but the main FPS is still 0.
  13. P

    Having issues with Amcrest IP3M-941 Wireless (Blue Iris Main Stream = 0.00 FPS)

    wittaj - thanks for the super fast response (as always)! I made the changes that you suggested - but the camera signal doesn't appear to be found by BI (I confirmed that my user/password are correct). If I remove the "&proto=Onvif" from the end of the stream profile, the camera is found -...
  14. P

    Having issues with Amcrest IP3M-941 Wireless (Blue Iris Main Stream = 0.00 FPS)

    Hi All! I have a single Amcrest IP3M-941 wireless PTZ camera that I use in a location where running ethernet was not practical. I have 23 other Amcrest/Dahua cameras using POE. All of this is running in Blue Iris 5.7.8.1. My issue that the substream shows up fine, but the main stream usually...
  15. P

    One of my cameras will not open at full res in UI3 (but works fine directly in BI)

    It doesn't appear that I have this enabled: My UI3 (and BI) profile is "Active" - not sure how to correlate that to the "Streaming 0/1/2" encode profiles.
See more
Top Bottom