Recent content by peedubya
-
New RCA HSDB2A 3MP Doorbell IP Camera
The doorbell contacts doesn't appear to be visible on the underside of the PCB with doorbell contacts (I called it PCB 2). And below are the rest of the pictures again for context: -
-
New RCA HSDB2A 3MP Doorbell IP Camera
UPDATE: I did a bit more digging based on your response (and some help from ChatGPT) and decided to reassemble everything to see if the BMS just needed time to charge the battery. I left it plugged in for two days, but unfortunately, nothing changed. I took it apart again to inspect further —... -
New RCA HSDB2A 3MP Doorbell IP Camera
Hi David, Sorry for the late reply — it's been a hectic week! Just a heads-up, I'm still fairly new to electronics, but I was able to confirm that the battery is charged (the multimeter showed voltage). I also checked the pins for continuity and didn’t get anything, and even with the battery... -
New RCA HSDB2A 3MP Doorbell IP Camera
okay, here is a what I'm working with... -
New RCA HSDB2A 3MP Doorbell IP Camera
Ohhh... okay, I see what you mean now. You're talking about the connection to the door bell from within the DB1 (db1c in your case). Okay, I'll have to take mine apart even further to see... I'll report back and Thank you! -
New RCA HSDB2A 3MP Doorbell IP Camera
Hi David, Thanks again for the input — really appreciate it. I don’t think the POGO pins are the issue, as I’m seeing confirmed voltage at the doorbell wires with a multimeter. If the spring contacts were damaged, I don’t think I’d be getting any reading. I actually tried replacing it with... -
New RCA HSDB2A 3MP Doorbell IP Camera
Hi David, Thanks for your reply, I'm assuming you're talking about the mechanical door bell seeing you mentioned POGO/spring contacts - Sorry but I was referring to my EZVIZ DB1 doorbell unit itself, not the mechanical doorbell (Mechanical door bell is working fine). My EZVIZ DB1 doorbell has... -
New RCA HSDB2A 3MP Doorbell IP Camera
Hey there, thanks for sharing your post. I have my EZVIZ DB1 stopped working, no power despite confirming door bell wires have current. I came across your post and decided to take apart the unit and discovered the battery was all puffed up so I ordered the same battery replacement you posted...