Recent content by misfiresam

  1. misfiresam

    possible PTZ / spotter conflict

    The acquisition box does show, it tracks first then as soon as loses contact for a millisecond it drops back to preset. Im thinking maybe the spotter is constantly pinging motion and the PTZ picks up the same motion again right after it loses the person, so it tries to react to the same event on...
  2. misfiresam

    possible PTZ / spotter conflict

    IVS
  3. misfiresam

    possible PTZ / spotter conflict

    Forgot to mention its a PTZ425DB-AT
  4. misfiresam

    possible PTZ / spotter conflict

    Hi, i have a new ptz set up with a spotter 180, without any overlapping intrusion zones, and no matter what I do my ptz keeps dropping autotrack. Im thinking maybe because my spotter double pings motion? autotrack timeout is set to 200 secs. What should I look into and what config should I...
  5. misfiresam

    T54IR ZE night time grain

    I am actually running everything on CBR. Not sure why this bullshit decided to be on VBR on its own, the backlight settings are off, and the camera is IR only, interesting enough. The reason why I bumped down the gain was because I was seeing some ghosting and wasn’t sure how to deal with that...
  6. misfiresam

    T54IR ZE night time grain

    Hi friends, I have a little set up here with some overviews and choke point cameras and an ANPR (ptz on the way also). So far so good but I’m concerned about the performance of my driveway 5442 though, Ive been playing around with the settings for some time now and I just cant get it to not be...
  7. misfiresam

    Mini-Review - EmpireTech LPR413-Z3

    Btw not the case, i installed it at that exact angle and it hasn’t missed a plate in 6 months
  8. misfiresam

    Mini-Review - EmpireTech LPR413-Z3

    Hi @wittaj you don’t think i’d be able to get a clean capture at this distance at night according to your tests? and is there any other anprs that would? also not sure about the said obnoxious red light. I currently run a z12e just wanted something automated.
  9. misfiresam

    B54IR-Z4E and NVR 2AI keeps dropping connection...

    yeah that's the plan for now, gonna go out there tomorrow and swap ports
  10. misfiresam

    B54IR-Z4E and NVR 2AI keeps dropping connection...

    yes yes yes and not sure
  11. misfiresam

    B54IR-Z4E and NVR 2AI keeps dropping connection...

    Problem was initially on the GUI, was just confirming on the dmss app. The reason why I went straight to the hard drives is because they are barracuda greens instead of something like a WD purple, green ain’t meant for cctv so thats clear now. The Z4E is really driving me nuts though, starting...
  12. misfiresam

    B54IR-Z4E and NVR 2AI keeps dropping connection...

    Ordered new hard drives for the NVR, but the fact that my other Z4E only stays online for an hour when i unplug and plug back in the cable is still a mystery to me :idk:
  13. misfiresam

    B54IR-Z4E and NVR 2AI keeps dropping connection...

    Hi friends, I bought the 16 channel 2AI NVR from empiretech alongside some b54irs and 4k t180s. First couple days everything was going very smooth, then out of nowhere I get these random drops in my recordings, it takes forever to pull up the recordings and one B54IR went completely offline for...
  14. misfiresam

    Can't get Acupick to work

    Appreciate your help, gonna check it out rn
  15. misfiresam

    Can't get Acupick to work

    I can't seem to figure out how to turn acupick attributes on, intrusion and tripwires and all the other stuff were my attempts to see maybe that's the issue
See more
Top Bottom