Recent content by MikeFromCanmore

  1. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c, good explanation. That would account for the crash wiping the config despite good WiFi. I do know that each RTSP request launches a separate stream so perhaps if I inadvertently leave my phone app on, and my ONVIF viewer, and my NVR all at the same time that might be a sufficiently...
  2. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Here is Google AI's wisdom on the question "EZVIZ db1 changes back to AP Mode periodically". Not super helpful for me because I have a very strong WiFi connection:
  3. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c. That worked! Here is exactly what I did: Reset the DB1 to factory defaults using batch config using Batch Config 3.0.2.6 Changed the SSID, Password, WPA2-PSK, and Working Mode from 'Ad-Hoc' to 'Manage' using Batch Config 3.0.2.6 Rebooted using Batch Config using Batch Config 3.0.2.6...
  4. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c. Wow, that is a lot of very helpful info! I have a few questions: 1) I found a post you made describing how to bypass the phone based config app after the DB1 reverts to AP Mode here where you say "You can log in and configure the DB to your liking totally bypassing the smartphone...
  5. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thank-you pete_c. I experienced the same. Settings survive a reboot and even reversion to AD_HOC mode. i.e. today it suddenly switched SSID to sofap_Exxxxxxx and waited for me to go through the config process. 1) Connect to Ad-Hoc SSID softap_Exxxxxx and use batch config to change SSID to...
  6. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c. Thank-you for explaining. So I infer from your elaboration that you are managing user additions from the "bottom" section of batch config. For further clarity I enclose photos of my Batch Config Tool showing what my understanding of your explanation is. Clearly, I am a hapless...
  7. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thanks pete_c. That worked on F/W 211101. Photos attached. By the way, what do you mean by "I do have it registered on the bottom section of batch configuration" ?
  8. MikeFromCanmore

    [SOLVED] My Hikvision (EZVIZ) camera cannot detect the SD Card or (possibly) How to unbrick your camera

    You have a Hikvision or EZVIZ camera that does not recognize the SD Card that you just formatted correctly, and inserted into the camera, while the camera was powered off. You have tried all the following: Based on advice from EZVIZ tech support I: 1) Placed a .dav file containing the latest...
  9. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c. I used 3.0.2.6 to change DB1 firmware to 200321 (HikVision). I was not able to then create a new user (neither Media nor ADMIN). Screen shots attached. What am I doing wrong?
  10. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hello David L! Thank-you for your brilliant suggestion. TLDR: The result is "HOW TO INSTALL FIRMWARE ON EZVIZ DB1 (POSSIBLY EVEN IF IT IS BRICKED) USING ONLY THE SD CARD" So I did what you suggested, and got this very nice letter back the next day: Regrettably, the 'issue' that I wrote in to...
  11. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hello pete_c! So you were able to add another user just now to firmware 200321, thus demonstrating this functionality is repeatable on that firmware revision on the EZVIZ DB1 Hardware. Later you will try to add a user on Firmware 211101 on your DB1 but you will have to change firmware on that...
  12. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hello David L. ! I have extracted "Batch Configuration.exe" from your zip file. It is BINARY IDENTICAL to the OEM file by the same name from the 3.0.2.6 install archive. Furthermore, the properties of this file (which are not included in the binary compare) appear to also be identical (and...
  13. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c. I have installed Batch Config 3.0.2.3. An interesting discovery ensued: Apparently due to HikVision being lax about updating the file properties when they make a new build, the Windows properties dialog box is NOT a reliable indicator as to what version of Batch Config one might...
  14. MikeFromCanmore

    How to install a modern doorbell cam and still have it work with your existing NuTone or similar intercom system

    Many people have covered this topic, but usually for a specific doorbell camera (RING/NEST/EZVIZ/EUFY/Reolink etc) or for a specific intercom system. Regarding the doorbell cam, it probably needs to come with a mechanical chime adaptor known as "The power module" or "The Chime Adaptor"...
  15. MikeFromCanmore

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi pete_c. Thank-you for advising that Batch Config 3.0.2.3 can manage ONVIF activation on EZVIZ DB1 w/HikVision 200321 firmware. Thank-you also for posting the ONVIF tool github code repository. I may need to check both these out further! When I installed HikVision 200321 for DB1 the...
See more
Top Bottom