McRoof's latest activity
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Thanks for all the suggestions everyone. I pulled the plug today and did a factory reset on the NVR. It seemed to have solved my issues...
-
-
MMight be nice to have a seperate POE switch for monkeying with Cameras that act goofy. Any chance there is another device(Camera or NVR)...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.I do have a separate POE switch for my home network. Its a fully managed Unifi switch so I can confirm there's nothing else on...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Thx, will try tomorrow. I can confirm one thing: the top pane staying empty is a Mac thing. This happened when I was directly connected...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Would i need to factory reset all the cameras as well? Cause that would be a bit of a pita. Or should they just work as long as i use...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Yeah they work fine. One is the intercom camera that also records continuously, the other two are WiFi cameras in the back of the garden...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Sounds like the last resort would be a factory reset of the NVR and hope that the cams will come back. If not, and the first 8 also...
-
MYou can just use an external switch as you know obviously. Again I find they are built in banks of 4 so usually I've had 4-8 ports go out.
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.After another full power down power up I now have the top panel back working. Plugged in the ‘old’ cameras 9 and 10, but don't seemed to...
-
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Starting to suspect the POE switch as well… I’ve now reconnected camera 10, of which I had only deleted the entry earlier to move some...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.For the IE links it looks like only the first camera I’m trying to access will throw a blank page at :10080, all cameras I click after...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Tried ports 16, 14, and 9
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Disconnected NVR from internet and running a direct cable to my Mac. Using Chrome I get better response and live view, although some IE...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Nope, but to be fair i was doing this from Safari on my iPad and the preview hardly ever works there. Now moved to my iMac ( no windows...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Rebooted the NVR (again) without new cam connected, then connected cam in port 9. I now see it as 10.1.1.73 but port 37777. And the...
-
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Doesn’t allow me to do that, neither on NVR nor external switch, creates an IP and gateway conflict. Tried it on NVR with gateway set to...
-
MMulticast mostly has to do with streaming to multiple clients, but I'm not a network engineer. I just recall a tidbit from my wayback...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Just to be sure, when you say with gateway do you mean the actual IP of the NVR (192.168.1.x with which I connect to log in), or do you...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.Thanks for your help. To answer your questions: I can only change the ip address of the camera on the NVR once it is initialized. So...
-
MMcRoof replied to the thread Unable to move ports on Dahua NVR.This is what I see when plugging in the new cam at port 9. Or port 14 for that matter, same result. I’ve also reloaded the firmware on...
-
