Yes ONVIF from the camera. No motion on in BI or camera. The event says ONVIF 'person/car/visitor' which is what I have those events named in BI. Which should not be possible as visitor means they rang the doorbell....
Anyone using the wifi version with blue iris 6? I'm using it with onvif triggers and it randomly about every hour alerts on person/vehicle/visitor all three with nothing in the video
Works perfectly with the last version of 5.9xxxx
Here?:
"Skip alerts when preset is active"
I only use two presets: home and Right
So check that on the preset: 'Right'
Because if I check that on preset 'home' it will skip any calls to 'right' while it is sitting at 'home'
Mostly dialed now
Another question:
When the ptz is already recording/tracking/triggered
How do I have the ptz ignore the spotter cam's new 'do command' request/alert and not have the ptz move away?
Figured it out
BI pc app:
top right 'group settings' gear
check 'include clips from excluded cameras'
guess this setting is in two places:
time line
and
group settings
all good now: clones are hidden from view, BI pc app and BI ios app both show clips in the timeline from the hidden clones
Yes:
The master is checked as Master
the two clones are not checked 'master'
all three cameras are checked 'group clone clips'
when hidden in the BI app on the server/pc, and setting 'show hidden cameras' is not checked: the clips show in alerts/timeline on the pc, but they do not show on the...
I increased the ptz speed a notch and now it looks like it takes 3.8secs from spotter onvif trigger until ptz is ivs triggered, so I am happy with that, so you nailed it bigredfish!
I made the ptz preset be alittle ahead, as wittaj mentioned and I think that made a difference as well
Any guidance on how much the multiple PTZ preset positions should overlap, based on distance etc?
I ask because with my view, about 50-100ft the ptz tends to get to position After the person has crossed to the original position
I have ptz home looking at the equivalent of the right half of the...