Recent content by Eweneek1

  1. E

    IP Address Change

    Thanks wittaj. Should have listened the first time. I changed the TP router IP address back to the AT&T IP address and now the cameras are showing. Everything is fine again.
  2. E

    IP Address Change

    Think the original AT&T router address was 192.168.1.254 and that would solve the problem? Would it change how I login to the router?
  3. E

    IP Address Change

    Tried to add another camera on the POE switch and it assigned another old IP address 192. 168.1.3. Thinking I might need to change the POE switch IP address in the attic.
  4. E

    IP Address Change

    Just one TP router now. All the IP addresses automatically changed with the TP router for both tv's, nvr, 2 printers, 2 computers, except for the Duhua camera. Here is a photo of the media cabinet I set up. The large black cable in port 1 of the TP router goes to a POE switch in the attic...
  5. E

    IP Address Change

    It was solved then by leaving NVR and camera on the ATT router. Now only using TP router and can't find a way to find the camera and edit IP address. NVR is working, but camera is still on old IP address 192.168.1.2
  6. E

    IP Address Change

    Thanks. Downloaded the config app and no cameras found.
  7. E

    IP Address Change

    Changed routers and now can't figure out how to find new camera ip address.
  8. E

    Lost Cameras With New TV

    Thanks everyone for the comments. Will post again after fiber install if problems occur.
  9. E

    Lost Cameras With New TV

    Just getting ready for Fiber internet install which will eliminate the ATT router/modem.. Have Passthrough activated on the ATT router. I did connect the TP wan port to the Netgear switch. All ten switch connected devices work except the NVR and cameras. Do I just leave the NVR and POE...
  10. E

    Lost Cameras With New TV

    It is connected by Ethernet. Think the problem has to do with me adding another router. Currently internet is by att dsl modem router. Added a second TP wifi 7 router.. Set Att router to passthrough to new router. The TP router connects to a Net Gear 12 port switch. The cameras are wired...
  11. E

    Lost Cameras With New TV

    Changed one LG TV to another yesterday and now cameras are lost. Checked cameras and there address is 192.168.1.2 and 192.168.1.3. NVR is at 192.168.0.186
  12. E

    Porch Camera IPC-E3241F-AS-M

    Thanks. Think I would like to get the 3541F-AS-M (2.8mm), but unable to find at Empire Tech. My NVR is a NVR5208.
  13. E

    Porch Camera IPC-E3241F-AS-M

    Want to add an additional camera to watch our front door entry. Thinking of using the IPC-E3241F-AS-M. Which is better, 2.8 or 3.6 lens? Porch is about 30 square feet and distance to sidewalk is about 18 feet. Would like to use a door bell camera, but don't have a door bell, just a twist...
  14. E

    Conncting NVR to Network

    Currently my NVR is connected directly to one TV and wirelessly to my Apple computer with SmartPSS. Would like to add it to all the household TVs. My current modem router setup feeds two switches. One switch is POE and feeds the cameras. The other switch feeds all the Cat6 lines. Can I just...
  15. E

    Have bought all my cameras and DVR from Andy at Empire Tech. When I asked Dahua about a...

    Have bought all my cameras and DVR from Andy at Empire Tech. When I asked Dahua about a specific camera they said it was not a Dahua North American product. What are the differences between the two, if any?
See more
Top Bottom