Recent content by D!ngo

  1. D

    32 Channel NVR with 16 POE not working

    alastairstevenson, Thank you for your reply and sorry for the late response. This is the result of my findings in case someone searches for the same problems as me. I removed the NVR to test the power going to the POE side. There is voltage going into the POE board, but no voltage on the...
  2. D

    32 Channel NVR with 16 POE not working

    I have an LTS LTN8932-P16, which is essentially a Hikvision with 16 built-in POE. I had 16 cameras connected to all the POE ports. Last year, the built-in POE stopped working, so I got a 48-channel switch and transferred all 16 cameras to it, and plugged the uplink from the switch to the NVR...
  3. D

    My NVR is down to three cmeras

    For some reason, I just can not get the solder to go up the wick. I did as you said; put flux on the tip, placed the wick on top and put the iron on the wick. But the solder would not melt. I set my iron from 400F to 750F, but the flux would melt and smoke but the solder never melted. I've held...
  4. D

    My NVR is down to three cmeras

    Thanks for the tip. I will open up the PS tonight and see what I can find. I don't have a scope, but then I don't know what that is, LOL. I have a multimeter so I will try that. Thank you for the heads up. I think I have a roll of soldering wick in my kit. I'll try that first. I remember I use...
  5. D

    My NVR is down to three cmeras

    Thanks, everyone. I feel confident they are indeed the reason for my problems. I ordered some replacements and a solder sucker. They should be here tomorrow. I'll replace them and will use the original power supply to see if the power supply really is the cause of these capacitor failures. The...
  6. D

    My NVR is down to three cmeras

    A couple of months ago one of the cameras in my LTS 8932-16p lost its video feed. This NVR has 16 POE built in and I have 16 cameras connected to them. In live view the affected camera showed "VIDEO LOSS" and there were no recordings from that cam. Then a few days later another one went down...
  7. D

    I Inadvertently formatted my NVR, can I restore or recover past videos?

    Thank you to all who replied. Luckily, I don't have anything that important to warrant the time spend to get the data back. Just some dog walkers who didn't pick up after themselves and some strange dude stopped in front of my driveway and knocked on my door. I'm just p****d that the...
  8. D

    I Inadvertently formatted my NVR, can I restore or recover past videos?

    Hi SyconsciousAu, Can you elaborate on how to do this? Is it through a professional service or something I can do it my self? I have 5T of space and, before the format, I think I was able to go back at least 2 years. Would it suffice to say that any new videos would override old files? Or will...
  9. D

    I Inadvertently formatted my NVR, can I restore or recover past videos?

    Hi mat200, thanks for the reply. Luckily the police request was not crucial. My neighbors also have cameras and I think they were adequate enough for them to do the investigation. Whoever designed the features of this LTS NVR should have their heads smacked. I mean, why would they put a FORMAT...
  10. D

    I Inadvertently formatted my NVR, can I restore or recover past videos?

    I have an LTS LTN8916-P16 NVR with (2) 2.5T hard drives hooked up to 16 ip cameras. My local police ask if I can provide videos of suspicious activities on my street. When I found the video, I wanted to export it via a USB to a thumbdrive. I selected a video in the "export" menu and click the...
  11. D

    Advice needed asap hikivision ds-2cd3345-i 4mp turret?

    I'm pretty sure they will be compatible if they support ONVIF. Where did you get the NVR? I don't know if Chinese version NVR will be compatible though. Milk is off on weekends so if you can wait for him til Monday, he will let you know for certain.
  12. D

    Alarm Output on Hikvision NVR... How to connect to siren/light???

    I was thinking of doing the same with my system when I have it up and running within the next couple of weeks. Thanks @Hikv for sharing your result and @alastairstevenson for your inputs.
  13. D

    LTS LTN8916-P16 4K NVR unboxing, first impressions

    You are right. I didn't notice they had the new 76** in 4K. When I was buying my LTS 8932 the cross reference model was the 7732. The other difference between the 76 and 77 model is the incoming bandwidth, 160Mbps vs 256Mbps. All these models #'s and differences is enough to give me gray hair.
  14. D

    LTS LTN8916-P16 4K NVR unboxing, first impressions

    The LTS LTN89** is their 4K model. Hikvision's 4K model is the 77** series. I think the model you're looking for that matches LTN8916-P16 is DS-7716NI-I4/16 http://overseas.hikvision.com/en/Products_accessries_214_i5730.html EDIT: I think their 4K model only comes in 1.5U
  15. D

    Opinion or experience on this compact dome PTZ for my front door.

    Good point. I hadn't think about the functionality issues of mounting it vertically. I did have to flip the camera module on my analog dome to get it to work vertically. I would imagine with pan and tilt it'll won't be that easy.
See more
Top Bottom