bp2008's latest activity
-
bp2008 replied to the thread Blue Iris UI3.It is fully compatible. You do need to copy over the overrides file and any others it may call upon (usually none) into the new www/ui3... -
I upgraded my modem recently to a RM551 and installed it in a M.2 to ethernet sled. Getting well over gig speeds now. Best part is I...
-
4 years later with no issues (obviously they have more subscribers)...
-
bp2008 replied to the thread Blue Iris in a VM..You would have to find a guide somewhere. It involves flashing new firmware onto it.
-
bp2008 replied to the thread Blue Iris in a VM..Depends on what you want to use it for. I think a lot of SAS controller cards are in "RAID" mode by default, meaning they want to be a...
-
This is a question for @bp2008
-
Also, Tailscale is using Wireguard as its VPN "engine", and Wireguard is using UDP as its transport protocol. That makes port forwarding...
-
In pfSense you can add ACL rules to UPnP, if you so choose to enable UPnP.
-
bp2008 replied to the thread Tail Scale VPN.Perhaps a poor choice of words on my part. Tailscale certainly does not require a port to be forwarded, but it does help it to achieve...
-
bp2008 replied to the thread Tail Scale VPN.Tailscale also can require a port to be forwarded for best performance/reliability. Although usually it does this by itself via UPnP...
-
bp2008 replied to the thread Dahua SD49225T-HN PTZ repair log.When I've had to repair these connectors in the past, I used an RJ45 keystone jack available at most hardware stores. Seems a lot...
-
bp2008 replied to the thread Amcrest Blue Iris 5 on eBay.That will work for Blue Iris 6. The title and picture are just out of date. The transition to Blue Iris 6 is seamless as far as...
-
Once you have a valid license, BI isn't keeping track of where it was purchased, so once you are on V5 with an active plan, you can...
-
My experience, and from what I see, true for most others: run the installation of BI6 (preferably using the full package installer from...
-
bp2008 replied to the thread Blue Iris in a VM..Passthrough slightly improves efficiency. There is less overhead for read and write operations, which results in theoretically higher...
-
bp2008 replied to the thread Blue Iris in a VM..I can confirm in Proxmox passing through any physical disks does appear to prevent taking normal snapshots of the VM even if the VM's...
-
-
bp2008 replied to the thread Trouble accessing BI when on public or other wi-fi (using tailscale).Since you have tailscale you should be using the tailscale address to connect to Blue Iris, and then when it doesn't work from some...
-
bp2008 replied to the thread Trouble accessing BI when on public or other wi-fi (using tailscale).Uncheck Bind Exclusively. That is probably your entire problem. It makes it so Blue Iris will only accept connections coming in to the...
