Recent content by bobloblaw23

  1. B

    Some Dahua Camera settings don't persist after reboot

    I know where you're coming from, but in this instance wouldn't using configtool rule it out that it's due to a browser? At this stage i will wait until the neighbour gets new cameras/NVR and pulls down the old ones, and then i'll try factory resetting them to see if they then hold changes. I'll...
  2. B

    Some Dahua Camera settings don't persist after reboot

    No luck. I installed configtool from the Dahua wiki, found the camera no problem. did the Modify IP operation, got the green tick, did a re-scan/refresh and it showed up under new IP. then did System settings, ticked the camera (with its new IP), clicked the Reboot tab, hit the manual Reboot...
  3. B

    Some Dahua Camera settings don't persist after reboot

    I will try configTool now and report back. They were taken from an 8-port NVR (OEM dahua) and plugged into just a PoE switch standalone. It was there i found they had been originally set up with static ips in the 10.1.1.x range. From here, i used a laptop with chrome and logged into each one...
  4. B

    Some Dahua Camera settings don't persist after reboot

    It's weird, i have a bunch of cameras i'm helping someone with (kind of learning as I go) and they won't hold IP config changes. The change takes effect immediately and begins working on the new IP, but come reboot / power loss, the camera reverts to the previous subnet (10.1.1.x) configured 8...
See more
Top Bottom