Recent content by Benscott

  1. B

    Hikivision hilook nvr with 3rd party cameras 4 work on motion detection ONE does not?

    Thanks TonyR do you know how to hard reset the dome camera at all?
  2. B

    Hikivision hilook nvr with 3rd party cameras 4 work on motion detection ONE does not?

    what do you mean by an onvif user?
  3. B

    Hikivision hilook nvr with 3rd party cameras 4 work on motion detection ONE does not?

    I havent yet what I want to do is to try and check motion is enabled on the cam that isnt working on its web base GUI problem is I can never log into it unless I hard reset it. If I put it back into my POE only I can use the armcrest tool it ifinds the camera it tells me the ip address the...
  4. B

    Hikivision hilook nvr with 3rd party cameras 4 work on motion detection ONE does not?

    Gday been mucking around with honeywell cameras on a hilook NVR. I have 4 of the honeywell cameras recording motion event but I originally had a cheap chineese brand camera that wouldn't record motion I thought it was the camera so today I purchased another honeywell camera its slightly...
  5. B

    Setting up a NVR that has ip cameras connected to it so I can view it remotely on a Mobile phone etc away from my LAN

    I have done that but im having a bit of trouble understanding it all.
  6. B

    Setting up a NVR that has ip cameras connected to it so I can view it remotely on a Mobile phone etc away from my LAN

    Hello Just need some help I have a HiLook NVR that I have fully setup with 3rd part cameras... I have it working but as soon as leave my wifi it cant connect to the NVR and cameras on my phone so I basically need to be local to view anything.... Waste of time really... Can anyone do a step by...
  7. B

    Setting up a Hilook NVR with honeywell Cameras

    So I have 5 cameras installed on it now but it wont record motion and pictures etc.... I have been mucking around with the NVR Settings im assuming now I will have to pull each camera off the nvr and put back into the POE port log into them and set the honeywell options up to help record etc...
  8. B

    Setting up a Hilook NVR with honeywell Cameras

    OK so I think my Brain has just managed to function this morning it seems I have got it working now I have tested on cam running through the NVR it all works!!!! So basically I set the cam to the ip address assigned by the NVR which for each channel is 192.168.254.2 channel one 192.168.254.3...
  9. B

    Setting up a Hilook NVR with honeywell Cameras

    So I thought I would try something this morning... Have you got anyway of proving what you mentioned above may be the issue or not? I'm just worried its something I'm doing or cant setup manually? I hard resetted a honeywell cam this morning and changed my internet settings to the below as per...
  10. B

    Setting up a Hilook NVR with honeywell Cameras

    Thanks for the reply guessing I have no way to fix this? I just dont really understand this stuff. Most people use an ip adress around 196. mine has always been 10.0.0. I would just like to really get rid of the switch im not even sure if I have it setup properly why cant i just take away the...
  11. B

    Setting up a Hilook NVR with honeywell Cameras

    Ok So I have managed to get them working but what im annoyed about is I dont want to use my existing POE Switch. Why does it only worked hookep up to this and no other way?
  12. B

    Setting up a Hilook NVR with honeywell Cameras

    I have managed to get the cameras online but the lights are flashing like crazy cant get any live feeds whatso ever basically useless. They say online which is a start but no view. I hav this going through my poe switch and the cameras are plugged into the poe switch and then the nvr is just...
  13. B

    Setting up a Hilook NVR with honeywell Cameras

    Ive been stuffing with this all day long its frustrating me no end. Basically I can get my cameras up and working on the original poe switch as soon as I plug them into the NVR though I get nothing.... I dont understand
  14. B

    Setting up a Hilook NVR with honeywell Cameras

    So I have a camera setup ip address 10.0.0.10. my nvr is 10.0.0.17 it wont connect to the camera. It is trying to ip adreess 192.168.254.2? How do i make it all correct so it works please
  15. B

    Setting up a Hilook NVR with honeywell Cameras

    no its not working... Something is a miss?
See more
Top Bottom