Pre-trigger needs to be set to 10 sec to get triggered recording

[Rick Rick]

I have to set Pre-trigger to 10 sec to get the start of the trigger. I have set my FPS on cam to what it is in BI. Anyone have this same problem? Any suggestions?

 

[fenderman]

I have to set Pre-trigger to 10 sec to get the start of the trigger. I have set my FPS on cam to what it is in BI. Anyone have this same problem? Any suggestions?

When recording direct two disc the recording only begins on the iframe that is why you must match your I frame interval to the FPS.... You also likely have your motion settings set incorrectly

 

[Rick Rick]

When recording direct two disc the recording only begins on the iframe that is why you must match your I frame interval to the FPS.... You also likely have your motion settings set incorrectly

Thanks. As I mentioned my IPS/FPS is matched.
Here are my motion settings. Maybe my object travels is off?

 

[Rick Rick]

When recording direct two disc the recording only begins on the iframe that is why you must match your I frame interval to the FPS.... You also likely have your motion settings set incorrectly

I am recording direct to disc

 

[fenderman]

I am recording direct to disc

Lower the contrast setting and drop the make time ... Also post your Zone settings

 

[fenderman]

And you did not mention anything about I frame interval settings in your original post which leads me to believe that it's still set incorrectly.... I frame interval settings are set in the camera... The blue iris FPS setting does nothing...

 

[Rick Rick]

Lower the contrast setting and drop the make time ... Also post your Zone settings

Here are zones settings:

 

[Rick Rick]

And you did not mention anything about I frame interval settings in your original post which leads me to believe that it's still set incorrectly.... I frame interval settings are set in the camera... The blue iris FPS setting does nothing...

Iframe are same as FPS in camera. It is a Sunba.
Since FPS settings in BI do nothing how do I set I frame settings in BI?

 

[Rick Rick]

Lower the contrast setting and drop the make time ... Also post your Zone settings

I lowered make time to .4 and lowered contrast to 42. I am down to Pre-trigger of 7 sec

 

[fenderman]

Iframe are same as FPS in camera. It is a Sunba.
Since FPS settings in BI do nothing how do I set I frame settings in BI?

You don't...it's set in the camera

 

[fenderman]

What are your Zone settings..post all zone settings

 

[Rick Rick]

You don't...it's set in the camera

Thanks for the info. SInce FPS settings "does nothing in BI" (per previous post) and you can not set IPS settings in BI what should you set to accommodate the
transfer rate of the camera?

 

[fenderman]

Thanks for the info. SInce FPS settings "does nothing in BI" (per previous post) and you can not set IPS settings in BI what should you set to accommodate the
transfer rate of the camera?

Huh? The iframe intervals and FPS settings are set in the camera only... Does your camera have I frame interval setting?

 

[fenderman]

Also sunba is complete garbage and should be avoided at all costs

 

[Rick Rick]

Huh? The iframe intervals and FPS settings are set in the camera only... Does your camera have I frame interval setting?

Below us what the camera is set at. Again my question is :SInce FPS settings "does nothing in BI" (per previous post) and you can not set IPS settings in BI what should you set to accommodate the
transfer rate of the camera?

 

[Rick Rick]

Also sunba is complete garbage and should be avoided at all costs

Can you tell me what are the problems with Sunba?

 

[fenderman]

Can you tell me what are the problems with Sunba?

junk hardware, junk firmware...=junk camera...sold to suckers on amazon..

 

[fenderman]

Below us what the camera is set at. Again my question is :SInce FPS settings "does nothing in BI" (per previous post) and you can not set IPS settings in BI what should you set to accommodate the
transfer rate of the camera?




View attachment 27142

your question makes not sense...accommodate what?

 

[fenderman]

are you using more than one zone? or only zone A...have you setup zone crossing rules? post ALL the settings

 

[Rick Rick]

junk hardware, junk firmware...=junk camera...sold to suckers on amazon..

junk hardware, junk firmware...=junk camera...sold to suckers on amazon..

OK. But can you be more specific? What can it not do that other cameras can do?