Vcs-sh30 ip speaker

[nagmaldeen alhababi]

I have vcs-sh30 ip speaker
I want to connect it with nvr and camera
but its not appear
So how to resolve this problem

 

[TonyR]

No need to post in 3 different forums.

 

[TonyR]

Looks like the NVR and the speaker need certain level of firmware:

D

Post in thread 'Mini-review: Dahua VCS-SH30 PoE speaker'

Oct 31, 2025

I bought the Dahua VCS-SH30 PoE speaker from @EMPIRETECANDY a while back and finally got around to mounting it outside.

For pole mounting I used the PK-088 kit from Polycase.

The speaker has 512MB internal memory and supports expansion via MicroSD slot. I installed a Samsung Pro Plus 128GB MicroSD and the full capacity is recognized.

Speaker amp power is 15W, which is plenty loud for my use.

The SIP protocol support is pretty useless (to me) as it limits you to 8KHz audio (G.711 codec).

Best audio quality is achieved by uploading MP3s to the speaker and playing from...

• dgonzalezO4

 

[nagmaldeen alhababi]

Looks like the NVR and the speaker need certain level of firmware:

D

Post in thread 'Mini-review: Dahua VCS-SH30 PoE speaker'

Oct 31, 2025

I bought the Dahua VCS-SH30 PoE speaker from @EMPIRETECANDY a while back and finally got around to mounting it outside.

For pole mounting I used the PK-088 kit from Polycase.

The speaker has 512MB internal memory and supports expansion via MicroSD slot. I installed a Samsung Pro Plus 128GB MicroSD and the full capacity is recognized.

Speaker amp power is 15W, which is plenty loud for my use.

The SIP protocol support is pretty useless (to me) as it limits you to 8KHz audio (G.711 codec).

Best audio quality is achieved by uploading MP3s to the speaker and playing from...

• dgonzalezO4

Which firmeware version need

 

[TonyR]

Which firmeware version need

Ask Andy of EmpireTech ( @EMPIRETECANDY ).

 

[EMPIRETECANDY]

You need a latest new fw for the speaker and only NVR5-EI series with special fw can support. Have to ask your supplier to send you the fw, different NVR have different fw.