Rather interesting to watch this character...

mat200

mat200

IPCT Contributor
Jan 17, 2017
17,259
29,120
An older one, but found rather interesting to watch this character...

On July 31, 2014 a Black male kicked in the back door of a residence located at 4300 Mill Creek Road. The suspect fled the location when the home security alarm went off. This offense was filed as a Criminal Mischief.
 
  • Like
Reactions: rufunky, handinpalm, Saltster and 2 others
Yup, I have the Elk M1 for several years now, no problems with the alarm at all, I also used it to open and close my chicken coop door in the morning and close it in the evenings. Saved me from going outside to do it manually. Nice system for security, or to open or turn things on and off etc...

Now with Video surveillance and Alarm, if they are stupid enough to stick around, (or not) still have the mugshots for proof!!! Double Whammy LOL

Why let a criminal in and have the time to ransack, better to have them running when they hear the sirens...

Since my NVR is located by my Alarm panels, I would like to find out if I could connect them together, if anyone knows?

Video is for external monitoring my, cars, truck, boats, trailers, etc... (as well as inside) but my Alarm is for peace of mind, that no one will gain access and stick around...

And my fully loaded bedside Smith and Wesson along with shotgun being handy, is for Stand your ground (law) upon forced entry... That is my Triple whammy for any criminal(s)...
 
Last edited:
  • Like
Reactions: mat200
Cornholio strikes again!

B6SJKgEIAAAhjgo.jpg
 
  • Like
Reactions: The_Penguin, rufunky and mat200
One of the least expensive hardening measures residents can implement is to purchase longer strike plates with more drill holes (lowes/HD/Amazon) for all exterior doors and drill 3.5 inch long wood screws into those beefier strike plates as well as into all door hinges. Those tiny screws the builder installs are worthless. Also good to have those $19 Masterlock bars securing all exterior doors. While at Lowes/HD get some cheap quarter round wood trim and custom cut them to secure all ground floor and second floor windows. Less than $100 can buy a lot of effective hardening!
 
  • Like
Reactions: mat200 and spoonek
Even after all the inexpensive hardening I mentioned above - the gentleman still could have smashed the glass to gain entry. I was going to say 'if the homeowner had shutters/curtains/blinds covering the windows then the gent might not have been interested in entering the home" but he might have tried to break in anyways because no one was home. Audible alarm saved the day regardless.
 
  • Like
Reactions: mat200
hmm after watching this i need to figure out my alarm because it never sounds off instantly like that unless its set to stay mode and we forget to disarm it and go to leave.
 
woolfman72 said:
hmm after watching this i need to figure out my alarm because it never sounds off instantly like that unless its set to stay mode and we forget to disarm it and go to leave.
Click to expand...
that is not a primary entry door...that is why it is set to sound immediately with no delay.
 
Hah! What an idiot.. :lmao:
Why is he covering his face when walking by the house, AFTER he just stood looking almost directly into the camera for quite some time?
(Can't figure out if he saw it or what he is doing?)

And whats up with the shirt up over his head? :screwy:


Alarm and survilliance is a must, no mather where you live..
I even have it in my rented garage. (Mostly because it can take me weeks between my visits.)
 
woolfman72 said:
good point. I guess i will have to test mine to see if it does the same. Otherwise will be getting them on the phone to make it happen.
Click to expand...

Just like Fender said, it most likely isn't a primary entrance door.... However, even if it is, my system (GE Concord) gives me the option for "no entry delay" at the time of arming on away mode and stay mode. We use it at night and if we are gone for a couple of days (probably should use all of the time). Just have to remember to disarm prior to entry...Hahaha
 
  • Like
Reactions: weigle2
Vtor said:
Just like Fender said, it most likely isn't a primary entrance door.... However, even if it is, my system (GE Concord) gives me the option for "no entry delay" at the time of arming on away mode and stay mode. We use it at night and if we are gone for a couple of days (probably should use all of the time). Just have to remember to disarm prior to entry...Hahaha
Click to expand...

Great system! I have it also with all the sensors you would ever need. Glass break and knock sensors are very nice. Install knock sensors on all door jambs and window frames to pick up someone trying to break in. Motiion detection and door/widow entry switches catch things too late in my opinion. They are already inside! At night my system is always on stay no delay, and the S&W is at my bedside in a drop down safe.
 
looney2ns said:
Also highlights the need for Harding your doors. That 1/2" screw that was used to install the lock catchs, won't do much for ya.
Surprised the glass survived.
Click to expand...

Tempered Glass is like transparent steel. Dear god and all else, go downstairs and check out screws on your strike and hinge. Mine had 5/8", wtf. I wondered why it bent when I tryed to force it open from maglocking. Spax 10x3 now.
 
You must log in or register to reply here.
Top Bottom