Received the cameras today, no damage at all, fire them up and change the IP Address and added them to blue Iris, they are working fine so far, I haven't change any settings yet, looks good so far.
Chewie
@chewie, looking good. Before you mount them can you measure the POE? Someone had asked what the measurement was but I had already mounted mine, thanks.
Hello Bob
the length of the wires are 8 inches,
from connector to connector is 4.5 inches
is a rectangular shape 2 sides are 1.0- inch, the other 2 sides are 1 inch 4/8's.
Regards.
Chewie
Hello All
Here are some night vision pics, I noticed that both cameras on the upper right corner is dark like a shadow, not sure if is the walls or the cover on the camera.
One of the camera has an issue, if I set with the frame rate of 30 and IF frame of 15 the camera is fine but if I lower the frame rate to 25 or 15 starts to disconnect with POE adapter and 12 volt supply adapter, any Ideas?
Bob - can you share your settings?
Regards.
Chewie
Thanks Bob, I set mine close to the defaults and is not disconnecting any more, I will see when I get home, but it did not have this issue until I change the settings, I will ask jack and see what he has to say.
Regards.
Chewie
Thanks Bob, I set mine close to the defaults and is not disconnecting any more, I will see when I get home, but it did not have this issue until I change the settings, I will ask jack and see what he has to say.
Regards.
Chewie