I have a camera that has 5 presets. Normally the camera is set to monitor preset 1 where I have zones set up. I have this camera at my winter home and monitor using Blue Iris from my summer home, I use the other presets to just look around my property and the zones I have set up are essentially for the camera and not the preset. I also use the Pan and Tilt feature as well. My concern is that if I get distracted and forget to put the camera back on preset 1, I either get triggers that I don't care about or get no triggers at all until the next time I check it which is usually at the end of each day. Is there a way to have the camera automatically reset back to preset 1 after a set amount of time with no activity like there is with Resume cycle on auto cycle patrol in the PTZ control. Thanks.
How to automatically reposition camera to home preset
- Thread starter fishinforfacts
- Start date
handinpalm
Getting comfortable
You do not state what type of PTZ cam you have. The Dahua cam has a setting in PTZ GUI that camera goes back to a particular preset after a time out. Have you looked in the cameras GUI?
I had before and have checked it again. The camera is a Hikvision DS-2DE2A404IW-DE3. It is possible that I am just looking in the wrong place.
handinpalm
Getting comfortable
The key is to add the ’home’ preset to your camera’s event schedule and tweak a few settings.
See this thread...
Is it possible to return to a camera to preset 1 after a trigger move to preset 2?
I have two presets: Camera facing driveway Camera facing entryway/door I currently have BI set to detect motion, and when it does move to preset 2. I am currently manually moving it back to preset 1 after reviewing the footage. I have tried using the PTZ auto-cycle between preset 1 and 2, but...
Last edited:
Thank you. Got it to work, Appreciate the helpThe key is is add the ’home’ preset to your camera’s event schedule tweak a few settings.
See this thread...
Is it possible to return to a camera to preset 1 after a trigger move to preset 2?
I have two presets: Camera facing driveway Camera facing entryway/door I currently have BI set to detect motion, and when it does move to preset 2. I am currently manually moving it back to preset 1 after reviewing the footage. I have tried using the PTZ auto-cycle between preset 1 and 2, but...ipcamtalk.com
