Dahua NVR5208-XI (WizMind) — worth it or better options?

I'm meaning the ability to see an image of a person, click on it, and then instantly see a snapshot of every other time that person has been detected by a camera on site.
Clicking a person from playback and searching by that person across cameras is AcuPick.
 

Attachments

  • 1000px-AcuPickHumanTargetSearch3.png
    1000px-AcuPickHumanTargetSearch3.png
    749.3 KB · Views: 1
So this is definately supported on the EI or EI2 models? I simply can't get it to work but it works fine on the XI model.
 
So this is definately supported on the EI or EI2 models? I simply can't get it to work but it works fine on the XI model.
I'm guessing the NVR -EI you have either requires AcuPick processing to be done by the camera (supported camera), or it needs a firmware update to get the feature.
 
So this is definately supported on the EI or EI2 models? I simply can't get it to work but it works fine on the XI model.

Yes, it supported...

You must enable AcuPick mode on EI NVR's in NVR SmartPlan... And also AcuPick must be enabled on cameras (cam must support it)...
XI and EI2 don't have those requirement (AcuPick is always enabled, XI/EI2 can add AcuPick to a few non AcuPick cams)...

Screenshot 2025-09-23 at 10.15.29.png
 
I'm guessing the NVR -EI you have either requires AcuPick processing to be done by the camera (supported camera), or it needs a firmware update to get the feature.

Yes - AcuPick must be supported by cam..

XI & EI2 models have limited capability to add AcuPick processing to a few non AcuPick cams.. But not EI (it's 2022 model with not so strong SOC / AI processor)..
 
  • Like
Reactions: Mark_M
does anyone have a comparison to how Andy's NVR16CH-AI NVR model equivalent is on the Luminys side? I'm guessing R52-16PA but can anyone confirm? thanks
 
does anyone have a comparison to how Andy's NVR16CH-AI NVR model equivalent is on the Luminys side? I'm guessing R52-16PA but can anyone confirm? thanks

it's not - decoding capabilities are half of 5xxx-EI (-AI models in Andy shop)..
And 5xxx-EI is old model (2022), replaced by new 5xxx-EI2 (AI-S2 in Andy shop, 2x more AI limits, bigger decoding capabilities, some extra AI functionality)..

ps. I'm not 100% sure, but as I understand Luminys vs Dahua situation, Luminys NVR will not support Dahua cams as NATIVE cam (with all capabilities)... They use own private protocol implementation. Only ONVIF without any functionality.
 
This is your camera (and the 4K-T) without the white LED's on and No ambient light. The one you have is simply a 4MP version of this
View attachment 226672

This is it with just some ambient light from a flood but NO LED's on the camera
View attachment 226674

This is with the LED's on all night like I run mine,.
View attachment 226676


And this is with the LED's on and the floods kicked in
View attachment 226675
yeah so just following up on this. there are NO floods in that image. i turn the illuminators OFF. That's the awesome part. Its just ambient light.
 
Wait, seriously? N82B3P = NVR5216-16P-EI ? why do you think that. That's crazy.

They have dozens of models, the old Dahua US models have different numbering, and Andy has yet a 3rd set of models.

But Yeah I think its pretty close comparison why?