- Mar 27, 2015
- 89
- 2
I am currently struggling with how to set up the Dual lens unit. As far as I can tell, it has 1 IP address associated with it. I can set it to a fixed ID for BI.
I have tried to do the find and inspect
Unit comes up Make: Generic/ONVIF model *RTSP H2.64/etc The Media port is 554 and onvif is 8080
Stream Profiles "mainstream" /11 second /12.
Sometimes I WILL SEE a FIXED LENS and other times the PTZ lens. I will see a "socket closed" . I have added two cameras separately within BLUE Iris...this seems to cause both to crash . I have moved /11 and /12 around, and the image jumps after a few seconds from the fixed lens to the PTZ lens.
I have seen images in Blue Iris where the stream profiles (in forums) say "lens 1" and "lens 2"!?!! Mine doesn't have those options?
I have tried to do the find and inspect
Unit comes up Make: Generic/ONVIF model *RTSP H2.64/etc The Media port is 554 and onvif is 8080
Stream Profiles "mainstream" /11 second /12.
Sometimes I WILL SEE a FIXED LENS and other times the PTZ lens. I will see a "socket closed" . I have added two cameras separately within BLUE Iris...this seems to cause both to crash . I have moved /11 and /12 around, and the image jumps after a few seconds from the fixed lens to the PTZ lens.
I have seen images in Blue Iris where the stream profiles (in forums) say "lens 1" and "lens 2"!?!! Mine doesn't have those options?




