Blue Iris Camera Compatibility.

Cool. Boy was I chasing my tail on that one until seeing an ad proclaiming something along the lines of "supports two simultaneous users so Mom and Dad can both watch Baby!" Uhhh..., OK. For 20 bucks? Silly me. LOL
 
Last edited:
Just found this thread and I am playing with a C202. I have the image in BI but I want to add the pan functionality (The C2020only has Pan/Tilt, no zoom)

Has any one had any luck in enabeling PT in BI with the TPLink cameras?
 
hello,
i am having some problems connecting my tapo doorbell (D235_BC10) cam to blue iris, or anything else for that matter.

the strange thing is i had this working on day one using the home assistant tapo camera integration, but as it was running on battery then i disabled it all, then wired it with a permanent power feed. Now, i can't get anything to receive video.

i have set up the camera account in the tapo app, using the username ceetee and pw thisisthepass (for testing purposes, it's over 8 chars and i can enter it again in the app to validate it's correct)
as the doorbell is running on mains power, always on mode is enabled.

if i connect to the camera in blue iris and specify port 2020 for discovery, it finds the camera and sets up as follows:
1762777212814.png
after pressing OK, the controls of the camera at the bottom are enabled, but i get no video feed.
1762777266285.png

i've tried vlc etc using the path and that doesn't appear to connect either.

firewall on the pc is off, and the doorbell is working ok through the app.

Any ideas what's going wrong?

EDIT: i just cancelled the tapo care trial, which wasn't connected to the camera but was present in the app. now it's working :D
 
Last edited:
  • Like
Reactions: looney2ns and ceetee_uk
You must log in or register to reply here.
Top Bottom