Search results

  1. M

    Doorbell Cam DHI-VTO2202F-P-S2 --- sending Tamper Alarm alerts once/week at exact time

    I’ve got a similar but slightly different issue with mine. Since the beginning of this month it started to generate a false alarm in the middle of the night for a door sensor that I don’t have. Thanks to your help I’ve managed to figure out this happens at 4am on tuesdays, probably due to the...
  2. M

    Unable to move ports on Dahua NVR

    Thanks for all the suggestions everyone. I pulled the plug today and did a factory reset on the NVR. It seemed to have solved my issues; all the camera's are back online and in the correct order (even port 9). I also ran through all the screen shots that I took before resetting but haven't been...
  3. M

    Unable to move ports on Dahua NVR

    I do have a separate POE switch for my home network. Its a fully managed Unifi switch so I can confirm there's nothing else on 192.168.1.108 and the camera's work fine when I connected them to the Unifi. The other reason I suspect the NVR and not the camera's, is that the camera's all worked...
  4. M

    Unable to move ports on Dahua NVR

    Thx, will try tomorrow. I can confirm one thing: the top pane staying empty is a Mac thing. This happened when I was directly connected to the nvr by a network cable (on both Safari and Chrome), but as soon as I plugged the nvr back into my home network and accessed it on my iPad, the cameras...
  5. M

    Unable to move ports on Dahua NVR

    Would i need to factory reset all the cameras as well? Cause that would be a bit of a pita. Or should they just work as long as i use the same password again and plug them in one at a time?
  6. M

    Unable to move ports on Dahua NVR

    Yeah they work fine. One is the intercom camera that also records continuously, the other two are WiFi cameras in the back of the garden just to keep an eye on the bunnies. Real ones, not the playboy type unfortunately.
  7. M

    Unable to move ports on Dahua NVR

    Sounds like the last resort would be a factory reset of the NVR and hope that the cams will come back. If not, and the first 8 also don’t move down anymore I’m toast.
  8. M

    Unable to move ports on Dahua NVR

    After another full power down power up I now have the top panel back working. Plugged in the ‘old’ cameras 9 and 10, but don't seemed to be moving down. Do i need to factory reset them as well, or should they normally migrate down if you’ve only deleted the entry?
  9. M

    Unable to move ports on Dahua NVR

    Starting to suspect the POE switch as well… I’ve now reconnected camera 10, of which I had only deleted the entry earlier to move some cameras around but never touched it or hooked anything else up to port 10. It’s also not showing up now either
  10. M

    Unable to move ports on Dahua NVR

    For the IE links it looks like only the first camera I’m trying to access will throw a blank page at :10080, all cameras I click after that work with 10081 onwards. Any idea?
  11. M

    Unable to move ports on Dahua NVR

    Tried ports 16, 14, and 9
  12. M

    Unable to move ports on Dahua NVR

    Disconnected NVR from internet and running a direct cable to my Mac. Using Chrome I get better response and live view, although some IE links still don’t work, some do. Reconnected the cam again after a factory reset, but doesn’t show up at all, either top or bottom.
  13. M

    Unable to move ports on Dahua NVR

    Nope, but to be fair i was doing this from Safari on my iPad and the preview hardly ever works there. Now moved to my iMac ( no windows available in my house )and I can see other camera's live view from Safari. Unfortunately the new cam has disappeared again from the top view, even after...
  14. M

    Unable to move ports on Dahua NVR

    Rebooted the NVR (again) without new cam connected, then connected cam in port 9. I now see it as 10.1.1.73 but port 37777. And the VTH’s are back too
  15. M

    Unable to move ports on Dahua NVR

    Doesn’t allow me to do that, neither on NVR nor external switch, creates an IP and gateway conflict. Tried it on NVR with gateway set to 10.1.1.1 but it totally disappeared. Now tried it via my external switch, but it also won’t show up once plugged back into NVR. One thing I noticed after...
  16. M

    Unable to move ports on Dahua NVR

    Just to be sure, when you say with gateway do you mean the actual IP of the NVR (192.168.1.x with which I connect to log in), or do you mean 10.1.1.1?
  17. M

    Unable to move ports on Dahua NVR

    Thanks for your help. To answer your questions: I can only change the ip address of the camera on the NVR once it is initialized. So not possible when it’s showing a red cross. Just done that, waiting for the result. In the mean time, I’ve checked these: I don’t have an option for bridge mode...
  18. M

    Unable to move ports on Dahua NVR

    This is what I see when plugging in the new cam at port 9. Or port 14 for that matter, same result. I’ve also reloaded the firmware on the NVR and completely shut it off, including unplugging the power cord. Hoping to avoid a complete factory reset of the NVR, but looks like that may be my...
  19. M

    Unable to move ports on Dahua NVR

    hi Red, thx for the quick reply. Yeah the 10.1.1.73 is the original cam 9, I’ve been hitting refresh like a madman but no joy. The ‘new’ cam that I initially set up successfully at port 14 is a DH-IPC-HDW3441TP-ZAS and I did the factory reset next to the SD card slot a few times now (more than...
  20. M

    Unable to move ports on Dahua NVR

    Hi everyone, I’ve been a long time lurker of this forum and found it very helpful when setting up my camera system about 5 years ago. As many, I started out wrong by following Dahua’s instructions and then ended up here following @bigredfish PSA for Dahua POE NVR and never looked back. I have...
Top Bottom